Complex butyl

The preparation of [8]annulenethorium(IV) bis-hydroborates have been achieved by several routes. 2 The alkyl-substituted complex, /)-butyl[8]annulenethorium(IV) bis-hydroborate, is prepared by the reaction of thorium tetrahydroborate with bis(n-butyl[8]annulene)thorium(IV) in refluxing THF. Due to the low solubility of the unsubstituted thorocene in THF, the unsubstituted mono-ring complex is best prepared by the reaction of thorium tetrahydroborate with an equimolar amount of dipotassium [8]annulene in THF at room temperature. 

The first practical method for asymmetric epoxidation of primary and secondary allylic alcohols was developed by K.B. Sharpless in 1980 (T. Katsuki, 1980 K.B. Sharpless, 1983 A, B, 1986 see also D. Hoppe, 1982). Tartaric esters, e.g., DET and DIPT" ( = diethyl and diisopropyl ( + )- or (— )-tartrates), are applied as chiral auxiliaries, titanium tetrakis(2-pro-panolate) as a catalyst and tert-butyl hydroperoxide (= TBHP, Bu OOH) as the oxidant. If the reaction mixture is kept absolutely dry, catalytic amounts of the dialkyl tartrate-titanium(IV) complex are suflicient, which largely facilitates work-up procedures (Y. Gao, 1987). Depending on the tartrate enantiomer used, either one of the 2,3-epoxy alcohols may be obtained with high enantioselectivity. The titanium probably binds to the diol grouping of one tartrate molecule and to the hydroxy groups of the bulky hydroperoxide and of the allylic alcohol... 

The conversion of primary alcohols and aldehydes into carboxylic acids is generally possible with all strong oxidants. Silver(II) oxide in THF/water is particularly useful as a neutral oxidant (E.J. Corey, 1968 A). The direct conversion of primary alcohols into carboxylic esters is achieved with MnOj in the presence of hydrogen cyanide and alcohols (E.J. Corey, 1968 A,D). The remarkably smooth oxidation of ethers to esters by ruthenium tetroxide has been employed quite often (D.G. Lee, 1973). Dibutyl ether affords butyl butanoate, and tetra-hydrofuran yields butyrolactone almost quantitatively. More complex educts also give acceptable yields (M.E. Wolff, 1963). 

Acetyl chlotide is reduced by vatious organometaUic compounds, eg, LiAlH (18). / fZ-Butyl alcohol lessens the activity of LiAlH to form lithium tti-/-butoxyalumium hydtide [17476-04-9] C22H2gA102Li, which can convert acetyl chlotide to acetaldehyde [75-07-0] (19). Triphenyl tin hydtide also reduces acetyl chlotide (20). Acetyl chlotide in the presence of Pt(II) or Rh(I) complexes, can cleave tetrahydrofuran [109-99-9] C HgO, to form chlorobutyl acetate [13398-04-4] in about 72% yield (21). Although catalytic hydrogenation of acetyl chlotide in the Rosenmund reaction is not very satisfactory, it is catalyticaHy possible to reduce acetic anhydride to ethylidene diacetate [542-10-9] in the presence of acetyl chlotide over palladium complexes (22). Rhodium trichloride, methyl iodide, and ttiphenylphosphine combine into a complex that is active in reducing acetyl chlotide (23). 

The solubility of the actinides in the organic phase, the right-hand side of equation 3, is achieved by the weak complexes that tri- -butyl phosphate... 

Peroxide Titanate Complexes. Titanates may influence reactions of organic peroxides (see Peroxides, organic). For example, /-butyl hydroperoxide epoxidizes olefins ... 

Exposure of TiCl in ethyl, propyl, and butyl alcohols for four weeks results in the precipitation of green octahedral Ti(III) complexes. Similar products form on irradiating Ti(OR)4 in ROH containing an equivalent of a lithium haUde (192). 

Mixtures of a titanium complex of saturated diols, such as TYZOR OGT, and a titanium acylate, such as bis- -butyl-bis-caproic acid titanate, do not have a yellowing or discoloring effect on white inks used to print polyolefin surfaces (506). The complexes formed by the reaction of one or two moles of diethyl citrate with TYZOR TPT have an insignificant color on their own and do not generate color with phenol-based antioxidants (507). The complexes formed by the addition of a mixture of mono- and dialkyl phosphate esters to TYZOR TBT are also low color-generating, adhesion-promoting additives for use in printing polyolefin films (508). 

Polymer—Cp—MCl complexes have been formed with the Cp-group covalendy bound to a polystyrene bead. The metal complex is uniformly distributed throughout the bead, as shown by electron microprobe x-ray fluorescence. Olefin hydrogenation catalysts were then prepared by reduction with butyl hthium (262). 

Hindered Phenols. Even a simple monophenoHc antioxidant, such as 2,6-di-/ f2 -butyl-/)-cresol [128-37-0] (1), has a complex chemistry in an autooxidizing substrate (Fig. 1). 

In the early years of the chemical industry, use of biological agents centered on fermentation (qv) techniques for the production of food products, eg, vinegar (qv), cheeses (see Milk and milk products), beer (qv), and of simple organic compounds such as acetone (qv), ethanol (qv), and the butyl alcohols (qv). By the middle of the twentieth century, most simple organic chemicals were produced synthetically. Fermentation was used for food products and for more complex substances such as pharmaceuticals (qv) (see also Antibiotics). Moreover, supports were developed to immobilize enzymes for use in industrial processes such as the hydrolysis of starch (qv) (see Enzyme applications). 

More Complex Mixtures. AH the sequences discussed are type I Hquid systems, ie, mixtures in which only one of the binary pairs shows Hquid—Hquid behavior. Many mixtures of commercial interest display Hquid—Hquid behavior in two of the binary pairs (type II systems), eg, secondary butyl alcohol—water—di-secondary butyl ether (SBA—water—DSBE), and water—formic acid—xylene (92). Sequences for these separations can be devised on the basis of residue curve maps. The SBA—water—DSBE separation is practiced by ARGO and is considered in detail in the Hterature (4,5,105,126). 

Halogenated Butyl Rubber. The halogenation is carried out in hydrocarbon solution using elemental chlorine or bromine in a 1 1 molar ratio with enchained isoprene. The reactions ate fast chlorination is faster. Both chlorinated and brominated butyl mbbers can be produced in the same plant in blocked operation. However, there are some differences in equipment and reaction conditions. A longer reaction time is requited for hromination. Separate faciUties are needed to store and meter individual halogens to the reactor. Additional faciUties are requited because of the complexity of stabilising brominated butyl mbber. 

Halobutyl Cures. Halogenated butyls cure faster in sulfur-accelerator systems than butyl bromobutyl is generally faster than chlorobutyl. Zinc oxide-based cure systems result in C—C bonds formed by alkylation through dehydrohalogenation of the halobutyl to form a zinc chloride catalyst (94,95). Cure rate is increased by stearic acid, but there is a competitive reaction of substitution at the halogen site. Because of this, stearic acid can reduce the overall state of cure (number of cross-links). Water is a strong retarder because it forms complexes with the reactive intermediates. Amine cure may be represented as follows ... 

Transition metal-catalyzed epoxidations, by peracids or peroxides, are complex and diverse in their reaction mechanisms (Section 5.05.4.2.2) (77MI50300). However, most advantageous conversions are possible using metal complexes. The use of t-butyl hydroperoxide with titanium tetraisopropoxide in the presence of tartrates gave asymmetric epoxides of 90-95% optical purity (80JA5974). 

Cosolvents ana Surfactants Many nonvolatile polar substances cannot be dissolved at moderate temperatures in nonpolar fluids such as CO9. Cosolvents (also called entrainers, modifiers, moderators) such as alcohols and acetone have been added to fluids to raise the solvent strength. The addition of only 2 mol % of the complexing agent tri-/i-butyl phosphate (TBP) to CO9 increases the solubility ofnydro-quinone by a factor of 250 due to Lewis acid-base interactions. Veiy recently, surfac tants have been used to form reverse micelles, microemulsions, and polymeric latexes in SCFs including CO9. These organized molecular assemblies can dissolve hydrophilic solutes and ionic species such as amino acids and even proteins. Examples of surfactant tails which interact favorably with CO9 include fluoroethers, fluoroacrylates, fluoroalkanes, propylene oxides, and siloxanes. 

Me3SiI, CH2CI2, 25°, 15 min, 85-95% yield.Under these cleavage conditions i,3-dithiolanes, alkyl and trimethylsilyl enol ethers, and enol acetates are stable. 1,3-Dioxolanes give complex mixtures. Alcohols, epoxides, trityl, r-butyl, and benzyl ethers and esters are reactive. Most other ethers and esters, amines, amides, ketones, olefins, acetylenes, and halides are expected to be stable. 

Many carbamates have been used as protective groups. They are arranged in this chapter in order of increasing complexity of stmcture. The most useful compounds do not necessarily have the simplest stmctures, but are /-butyl (BOC), readily cleaved by acidic hydrolysis benzyl (Cbz or Z), cleaved by catalytic hy-drogenolysis 2,4-dichlorobenzyl, stable to the acid-catalyzed hydrolysis of benzyl and /-butyl carbamates 2-(biphenylyl)isopropyl, cleaved more easily than /-butyl carbamate by dilute acetic acid 9-fluorenylmethyl, cleaved by /3-elimination with base isonicotinyl, cleaved by reduction with zinc in acetic acid 1-adamantyl, readily cleaved by trifluoroacetic acid and ally], readily cleaved by Pd-catalyzed isomerisation. 

---