Colloidal inorganic particles

Sucrose, like other simple carbohydrates, is used as additive in mineral suspensions, concrete, and ceramics. The hygroscopic character of the carbohydrates and their ability to interact with colloidal inorganic particles and ions modifies the hydration phenomena within the suspensions, and consequently on the rheology of the medium and the kinetics (most often slowing down) of the... 

A method of preparing superficially porous particles by depositing colloidal inorganic particles of a given size and ionic charge from aqueous dispersion onto the surface of a solid, a single monolayer of microparticles at a time, and by repeating the process, to coat the surface with any desired number of monolayers, is described in Canadian Patent No. 729,581. 

Natural water is an aqueous solution of gases, ions and molecules, but it also contains undissolved, suspended and/or colloidal inorganic particles of different size and chemical composition and biogenic living and/or dead matter such as cells, plants, and animals etc., sometimes termed hydrosol. Water occurs in the climate system in different forms ... 

A number of speciation schemes have been devised whereby a range of analytical techniques is applied to a single sample in order to provide as much information as possible about the different species. The first reasonably comprehensive scheme was developed by Batley and Florence [32]. The scheme has been applied mainly to the speciation of metals in sea water. The broad conclusion of their studies is that lead is associated largely with colloidal inorganic particles [33]. 

Sol-gel is one of the most useful techniques for preparation of inorganic membranes with fine pores in the nanometer range (1-5 nm). The sol is a stable suspension of colloidal solid particles within soft uniform solution. The gel was obtained by hydrolysis with open reflux in 24 hours at 85-90 °C. The advantage of sol-gel technology is the ability to produce... 

Often the addition of specific chemicals is necessary to obtain a practical, effective process. The intensity of the pretreatment strongly depends on the pollution level that is acceptable for the anaerobic and/or aerobic treatment steps, following the particle removal step. Easily biodegradable colloidal pollutants do not cause a problem. However inorganic particles can cause serious problems in biological treatment steps and need to be removed first. 

A.J.G. Blesa, M.A. (1988) The dissolution of magnetite by nitrilotriacetatoferrate(II). J. Chem. Soc. Earaday Trans. I. 84 9-18 Delgado, A. Torrent, J. (2000) Phosphorus forms and desorption patterns in heavily fertilized calcareous and limed acid soils. Soil Sci. Soc. Am. J. 64 2031-2037 Delgado, A.V. Gonzalez-Caballero, F. (1998) Inorganic particles as colloidal models. Effects of size and shape on the electrokinetics of hematite (a-Fe203). Croatica Chemica Acta 71 1087-1104... 

Inorganic particles such as the dispersion of carbon black, chromatographic silica, glass beads, silica beads, silica sol, silver sol, titania, and polydispersed zirconia colloidal suspensions have been... 

Crosslinked polyacrylamide latexes encapsulating microparticles of silica and alumina have also been prepared by this method [179], Three steps are involved a) formation of a stable colloidal dispersion of the inorganic particles in an aqueous solution containing acrylamide, crosslinker, dispersant, and initiator b) HIPE preparation with this aqueous solution as the dispersed phase and c) polymerisation. The latex particles are polyhedral in shape, shown clearly by excellent scanning electron micrographs, and have sizes of between 1 and 5 pm. 

The challenge with parenteral iron therapy is that parenteral administration of inorganic free ferric iron produces serious dose-dependent toxicity, which severely limits the dose of that can be administered. However, when the ferric iron is formulated as a colloid containing particles with a core of iron oxyhydroxide surrounded by a core of carbohydrate, bioactive iron is released slowly from the stable colloid particles. In the USA, the three available forms of parenteral iron are iron dextran, sodium ferric gluconate complex, and iron sucrose. 

Colloids. Colloids include particles with hydrophobic, hydrophilic and intermediate forms with a size range 1 - 400 nm. Both organic (including macromolecules) and inorganic (hydrolyzed silica and metal oxides) colloids occur in the marine environment (Sigleo and Helz, 1981). Their surfaces often contain suitable sites for interactions with trace metals (adsorption, complexation). In the marine environment all particles have a negative surface charge (Neihof and Loeb, 1972 Hunter and Liss, 1982). Increase of the electrolyte concentration decreases the stability of the colloidal particles. As a result the... 

Suspended solid surfaces (particles or colloids) in waters play a prominent role in controlling the concentration of dissolved trace elements. Most of these elements are eliminated by sedimentation after incorporation on to or into particles, generally by complexation with the surface sites. The most common inorganic particles and colloids are non-clay silicates (quartz, potash feldspar, plagioclase, opaline silica (diatoms)) clays (illite, smectite) carbonates (calcite, dolomite) Fe-Mn oxides (goethite, magnetite) phosphates (apatite) sulfides (mackinawite). Particles and colloids in a water body may be classified as a function of their origin ... 

Petroleum oils often contain suspended or colloidal inorganic materials. In the case of used lubricating oils small particles of metals are present. In many cases these suspended solids are of sufficiently small particle size that efficient breakdown occurs in the flame and a simple dilution procedure may be used. However, where it is suspected that this is not the case then it is recommended that an ashing technique is used to prepare the sample. 

So far, only a limited number of full dielectric relaxation spectra for well defined systems are available. Apart from the technical problems involved in the measurements (sec. 4.5e) there is the colloidal problem of synthesizing sufficiently concentrated sols with homodisperse spherical particles, preferably having different radii but fixed surface properties. Latices are popular objects because the particles are easily made homodisperse and spherical. Nevertheless they are somewhat suspect because there may be hairs on the surface, drastically affecting lateral hydrodynamic motion close to the surface. Moreover, changing the radius requires new syntheses and it is difficult to guarantee exact reproducibility of the surface structure. Inorganic particles do not have these drawbacks but it is not so ea to synthesize these as perfect spheres. 

---