Clays silicate

A specific example of this would be the weathering of K-feldspar and the formation of kao-linite (see Table 8-1 for mineral definitions), a layer-silicate clay ... 

Secondary minerals. As weathering of primary minerals proceeds, ions are released into solution, and new minerals are formed. These new minerals, called secondary minerals, include layer silicate clay minerals, carbonates, phosphates, sulfates and sulfides, different hydroxides and oxyhydroxides of Al, Fe, Mn, Ti, and Si, and non-crystalline minerals such as allophane and imogolite. Secondary minerals, such as the clay minerals, may have a specific surface area in the range of 20-800 m /g and up to 1000 m /g in the case of imogolite (Wada, 1985). Surface area is very important because most chemical reactions in soil are surface reactions occurring at the interface of solids and the soil solution. Layer-silicate clays, oxides, and carbonates are the most widespread secondary minerals. 

Layer-silicate structure, as in other silicate minerals, is dominated by the strong Si-O bond, which accounts for the relative insolubility of these minerals. Other elements involved in the building of layer silicates are Al, Mg, or Fe coordinated with O and OH. The spatial arrangement of Si and these metals with O and OH results in the formation of tetrahedral and octahedral sheets (see Fig. 8-2). The combination of the tetrahedral and octahedral sheets in different groupings, and in conjunction with different metal oxide sheets, generates a number of different layer silicate clays (see Table 8-1). 

Once a layer-silicate clay forms, it does not necessarily remain in the soil forever. As conditions change it too may weather and a new mineral may form that is more in equilibrium with the new conditions. For example, it is common in young soils for the concentrations of cations such as K, Ca, or Mg in the soil solution to be high, but as primary minerals are weathered and disappear, cation concentrations will decrease. With a decrease in solution cations, a layer-silicate such as vermiculite will no longer be stable and can weather. In its place. 

Fig. 8-2 Structure of a 1 1 (kaolinite) and a (montmorillonite) layer-silicate clay mineral.

Silicates Clays, napheline-syenite beryllium ores serpentine... 

Boyd SA, Jaynes WF (1994) Role of layer charge in organic contaminant sorption by organo-clays. In Mermut AR (ed) Layer charge characteristics of 2 1 silicate clay minerals. CMS Workshop Lecture Series, vol 6, The Clay Minerals Society, Boulder, CO, pp 48-77... 

The most significant class of inorganic supports, which is used for the direct ion exchange of positively charged transition-metal complexes, are smectite clays. Pin-navaia has introduced the use of these swelling, layered silicate clays for catalysis. Other clays include montmorillonite, bentonite, and laponite. As shown by Pinna-vaia, cationic transition-metal complexes can be readily exchanged (intercalated) into the solvated interlayers of these silicates (Eq. (1)) [117] ... 

In terms of soil development and the development of soil horizons, the smectites and fine-grained micas are found in younger, less weathered soils. Kaolinite and amorphous clays are found in highly weathered soils. Considering a time sequence, at the beginning of formation, soil will contain more complex clays that weather to simpler forms over time. However, it is convenient to start with a description of the simpler layer silicate clays and then describe the more complex clays. 

Aluminum silicates clays, oxides - Ion exchange binding of phosphates and metal ions unless present in large concentrations, overall effect on trace element removal is small. 

Table II. Groups of exchanqe sites in some layer silicate clays as...

Electron spin resonance (ESR) is a useful technique for investigating the mobility and orientation of exchange cations at the surface of layer silicate clays in various states of hydration. Using Cu2+ and the charged nitroxide spin probe, TEMPAMINE+... 

Spectroscopic techniques such as electron spin resonance (ESR) offer the possibility to "probe" the chemical environment of the interlayer regions. With the ESR technique, an appropriate paramagnetic ion or molecule is allowed to penetrate the interlayer, and chemical information is deduced from the ESR spectrum. Transition metal ions, such as Cu2+, and nitroxide radical cations, such as TEMPAMINE (4-amino-2,2,6,6-tetramethylpiperidine N-oxide) have been used as probes in this manner (6-14). Since ESR is a sensitive and non-destructive method, investigations of small quantities of cations on layer silicate clays at various stages... 

Table I. Unit cell formulae and sources of the Na+-saturated layer silicate clays.

Table II. C-axis spacings of layer silicate clays...

However, when protonated TEMPAMINE adsorbs by cation exchange on fully hydrated layer silicate clays (10, 11), the spectrum becomes less symmetrical as shown in Figure 5. The beidellite and montmorillonite spectra have line shapes typical for nitroxide molecules with rotational frequencies on the order of 10 Hz (17). 

Table IV. ESR parameters of Cu + in air-dry oriented layer silicate clay films.

Adsorbed Cu + on layer silicate clays readily forms complexes with neutral ligands by displacement of water, as proven by the... 

Clay minerals are characterized by a high surface charge and a very small particle size. A detailed presentation of two types of layered silicate clay (kaoUnite and smectite) is given in Chapter 1. 

Schwertmann, U. Eechter, H. (1982) The point of zero charge of natural and synthetic ferrihydrite and its relation to adsorbed silicate. Clay Min. 17 471-476... 

KaoUn powder and other hydrated aluminum silicate clays, often combined with pectin (a complex carbohydrate), are the most widely used adsorbent powders (e.g., Kaopectate). Kaolin is a naturally occurring hydrated aluminum silicate that is prepared for medicinal use as a very finely divided powder. The rationale behind its use in acute nonspecific diarrhea stems from its ability to adsorb some of the bacterial toxins that often cause the condition. It is almost harmless and is effective in many cases of diarrhea if taken in large enough doses (2-10 g initially, followed by the same amount after every bowel movement). The adsorbents are generally safe, but they may interfere with the absorption of some drugs from the GI tract. 

Sulfur-containing chemicals Ditiocarbamates Stearic acid Hindered phenols Silicon oil Ahunnum silicates (clays) Titanium dioxide... 

---