Chloro methyl phenyl sulfone

In the condensation reaction between chloro- and bromo-methyl aryl sulfones and carbonyl compounds, a-sulfonyloxiranes were obtained. In this condensation reaction, bases such as potassium t-butoxides372, NaH373 and aqueous concentrated hydroxide with benzyltriethylammonium chloride under two-phase condensation were used374. In the reaction with aldehydes only the trans-epoxide isomers resulted, whereas lith-iofluoromethyl phenyl sulfone 289375 and 291376 were found to add to aldehydes affording /J-hydroxysulfones 290 and 292, respectively. 

Selection of appropriate conditions to modify polymers is facilitated by preliminary studies with well designed model compounds. The work with model systems is critical when studying condensation polymers because the main chain linkages have proved to be remarkably labile under certain conditions. Condensation of 4-chlorophenyl phenyl sulfone with the disodium salt of blsphenol-A yields 2,2-bis[4 -(4"-phenylsulfonylphenoxyl)phenyl] propane, T, an excellent model for the poly(arylene ether sulfone) substrate. Conditions for quantitative bromination, nitration, chloro-methylation, and aminomethylation of the model compound were established. Comparable conditions were employed to modify the corresponding polymers. 

The second order nature of quaternization reactions in our system was confirmed by rate studies on model compounds. Although benzyl chloride is usually selected as the model for chloro-methylated polymers , we chose to synthesize a difunctional model that would be sensitive to neighboring group effects. Condensation of 4-chlorophenyl phenyl sulfone with the disodlum salt of bis-phenol-A yielded an excellent model for the polysulfone segment, Quantitative chloromethylation of with a chloromethyl methyl ether/ methyl acetate mixture in the presence of stannic chloride afforded the corresponding bischloromethyl adduct,... 

One Sanofi synthesis of enantiomerically pure (-i-)-clopidogrel (2) utilized optically pure (R)-(2-chloro-phenyl)-hydroxy-acetic acid (20), a mandelic acid derivative, available from a chiral pool. After formation of methyl ester 21, tosylation of (/ )-21 using toluene sulfonyl chloride led to a-tolenesulfonate ester 22. Subsequently, the Sn2 displacement of 22 with thieno[3,2-c]pyridine (8) then constructed (-i-)-clopidogrel (2). Another Sanofi synthesis of enantiomerically pure (-i-)-clopidogrel (2) took advantage of resolution of racemic a-amino acid 23 to access (S)-23. The methyl ester 24 was prepared by treatment of (S)-23 with thionyl chloride and methanol. Subsequent Sn2 displacement of (2-thienyl)-ethyl para-toluene-sulfonate (25) assembled amine 26. 

PB PBI PBMA PBO PBT(H) PBTP PC PCHMA PCTFE PDAP PDMS PE PEHD PELD PEMD PEC PEEK PEG PEI PEK PEN PEO PES PET PF PI PIB PMA PMMA PMI PMP POB POM PP PPE PPP PPPE PPQ PPS PPSU PS PSU PTFE PTMT PU PUR Poly(n.butylene) Poly(benzimidazole) Poly(n.butyl methacrylate) Poly(benzoxazole) Poly(benzthiazole) Poly(butylene glycol terephthalate) Polycarbonate Poly(cyclohexyl methacrylate) Poly(chloro-trifluoro ethylene) Poly(diallyl phthalate) Poly(dimethyl siloxane) Polyethylene High density polyethylene Low density polyethylene Medium density polyethylene Chlorinated polyethylene Poly-ether-ether ketone poly(ethylene glycol) Poly-ether-imide Poly-ether ketone Poly(ethylene-2,6-naphthalene dicarboxylate) Poly(ethylene oxide) Poly-ether sulfone Poly(ethylene terephthalate) Phenol formaldehyde resin Polyimide Polyisobutylene Poly(methyl acrylate) Poly(methyl methacrylate) Poly(methacryl imide) Poly(methylpentene) Poly(hydroxy-benzoate) Polyoxymethylene = polyacetal = polyformaldehyde Polypropylene Poly (2,6-dimethyl-l,4-phenylene ether) = Poly(phenylene oxide) Polyp araphenylene Poly(2,6-diphenyl-l,4-phenylene ether) Poly(phenyl quinoxaline) Polyphenylene sulfide, polysulfide Polyphenylene sulfone Polystyrene Polysulfone Poly(tetrafluoroethylene) Poly(tetramethylene terephthalate) Polyurethane Polyurethane rubber... 

Additions of the Michael type of nucleophiles to the carbon-carbon double bond of thiete 1,1-dioxides to give 3-substituted thietane 1,1-dioxides occur readily. The addition of hydrogen has been discussed in Section A. Nucleophiles include cyanide, the anion of nitroethane, the lithium salt of r-butyl o-tolyl sulfone, dimethylamine, cyclohexylamine, ethoxide, and hydrogen sulfide. The reaction is exemplified by the synthesis of 278. Additions to 3-chloro-2H-thiete 1,1-dioxide most likely proceed by an addition-elimination mechanism an example is shown for the addition of the anion of dimethylmalonate to give 279. The replacement of a 3-morpholinyl group by a 3-A methyl-A-phenylamino group in thiete 1,1-dioxide is another example of addition-elimination. An addition of ethoxide with elimination of p-nitrophenyl anion may occur with 268 (Ar = / -N02C6H4). " Addition of bromine via N-bromo-succinimide to the double bond of 4-phenyl-2H-thiete 1,1-dioxide occurs only in 1.5% yield. ... 

A four-component domino reaction of isatin 58, phenylhydrazine, 3-aminocrotononitrile 117, and cyclic 3-diketones/amide/thioamide 118 in an aqueous medium in the presence of ( )-camphor-10-sulfonic acid on heating at 100 °C for 2-3 h afforded the spiro-fused 2-oxindoles 119 (Scheme 39) [94]. The reaction was successfully extended to 5-chloro- and 5-nitroisatins. According to the proposed mechanism, an acid-catalyzed reaction of phenylhydrazine with nitrile 117 affords the 5-amino-3-methyl-l-phenyl pyrazole 111 that adds to the carbonyl carbon of isatin giving rise to an intermediate product 120. The acid-catalyzed reaction of this intermediate (that has been isolated) with carbonyl compounds 118 affords another intermediate compound 121, which eventually furnishes the final products 119 by cyclodehydration forming tetrahydropyridine ring followed by subsequent dehydration (Scheme 40). 

---