Heterogeneity, chemical

Heterogeneity Adsorbents and ion exchangers can be physically and chemically heterogeneous. Although exceptions exist, solutes generally compete for the same sites. Models for adsorbent heterogeneity have been developed for both discrete and continuous distributions of energies [Ross and Olivier, On Physical Adsorption, Interscience, New York, 1964 Jaroniec and Madey, Rudzinsld and Everett, gen. refs.]. 

When considering relea.se mechanisms, the physical and chemical heterogeneity of the adhesive/release interface cannot be ignored. At its most basic level, roughness of the release and PSA surface, the stiffness of the PSA and the method in which the PSA and release surface are brought together define the contact area of the interface. The area of contact between the PSA and release material defines not only the area over which chemical interactions are possible, but al.so potential mechanical obstacles to release. In practice, a differential liner for a transfer adhesive can be made to depend in part on the substrate roughness for the differences in release properties [21],... 

FIG. 19 Scheme of a simple fluid confined by a chemically heterogeneous model pore. Fluid modecules (grey spheres) are spherically symmetric. Each substrate consists of a sequence of crystallographic planes separated by a distance 8 along the z axis. The surface planes of the two opposite substrates are separated by a distance s,. Periodic boundary conditions are imposed in the x and y directions (see text) (from Ref. 77). 

The interaction of a simple fluid with a single chemically heterogeneous substrate has also been studied. Koch et al. consider a semiinfinite planar substrate with a sharp junction between weakly and strongly attractive portions and investigate the influence of this junction on the density profile of the fluid in front of the substrate [172-174]. Lenz and Lipowsky, on the other hand, are concerned with formation and morphology of micrometer droplets [175]. 

M. Schoen, D. J. Diestler. Ultrathin fluid films confined to a chemically heterogeneous sht-shaped nanopore. Phys Rev E 5(5 4427—4440, 1997. 

There is increasing interest in copolymer systems, which, due to their chemical heterogeneity, may require very complex eluent systems in order to dissolve the sample and ensure that the separation ensues hy a pure size exclusion mechanism. In these examples, the PLgel is also compatible with eluent systems containing mixed solvents of different polarity (including water as a cosolvent up to 10% hy volume) and in organic solvents modified with acids or bases (e.g., acetic or formic acid, triethanolamine) as it is stable in the pH range of 1-14. 

It is basically a fractionation process that depends not only on molecular size, but also on chemical composition, stereo-configuration, branching, and crosslinking. For multicomponent systems, fractionation with different ion polymolecularity, chemical heterogeneity and sequence length distribution, solubility or elution fractionation is of primary importance. Therefore, gel permeation chromatography or size exclusion chromatography is used as an important tool for the characterization of PBAs. 

The investigation of structural dynamics of CP is particularly topical in connection with the establishment of correlation between local intramolecular mobility and the reactivity of chain fragments. It has been established that groups located in the most mobile parts of the polymer chain exhibit the greatest reactivity [48], The chemical heterogeneity in relationship to local mobility is particularly... 

E---S + R E---P->E + P The enzyme is regenerated at the end of this sequence, making it available to bind another substrate molecule. Note that the steps in this enzyme-catalyzed biochemical mechanism are similar to the steps in chemical heterogeneous catalysis binding with bond weakening, reaction at the bound site, and release of products. 

Electrocatalytic reactions have much in common with ordinary (chemical) heterogeneous catalytic reactions, but electrocatalysis has certain characteristic special features ... 

Raevsky, O. A. Molecular lipophilicity calculations of chemically heterogeneous... 

Examination of chemical heterogeneities within a single TLC spot... 

The dissolution of zinc in a mineral acid is much faster when the zinc contains an admixture of copper. This is because the surface of the metal contains copper crystallites at which hydrogen evolution occurs with a much lower overpotential than at zinc (see Fig. 5.54C). The mixed potential is shifted to a more positive value, E mix, and the corrosion current increases. In this case the cathodic and anodic processes occur on separate surfaces. This phenomenon is termed corrosion of a chemically heterogeneous surface. In the solution an electric current flows between the cathodic and anodic domains which represent short-circuited electrodes of a galvanic cell. A. de la Rive assumed this to be the only kind of corrosion, calling these systems local cells. 

Semba, K. (2000). Multiple output pathways of the basal forebrain organization, chemical heterogeneity, and roles in vigilance. Behav. Brain Res. 115, 117-41. 

Polycarbonates have also been studied recently with regard to chemical heterogeneity. Polycarbonates are polycondensation products of phosgene and aliphatic or aromatic dihydroxy compounds. 

---