Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Ceric

The compound is employed inter alia as an indicator In titrations with potassium dichromate and ceric siilphate solutions. [Pg.991]

Ceric slats are orange red or yellowish cerous salts are usually white. [Pg.173]

As ceric sulfate is used extensively as a volumetric oxidizing agent in quantitative analysis. Cerium compounds are used in the manufacture of glass, both as a component and as a decolorizer. [Pg.173]

Ceric sulfate, O.IA Ce(lV) to Ce(lll). Dissolve 63.26 g of cerium(lV) ammonium sulfate dihydrate in 500 mL of 2N sulfuric acid. Dilute the solution to 1 L and standardize against the... [Pg.1159]

There are many chemical methods for generating radicals reported in the hterature that do not involve conventional initiators. Specific examples are included in References 64—79. Most of these radical-generating systems carmot broadly compete with the use of conventional initiators in industrial polymer apphcations owing to cost or efficiency considerations. However, some systems may be weU-suited for initiating specific radical reactions or polymerizations, eg, grafting of monomers to cellulose using ceric ion (80). [Pg.230]

The methods in which iodine is used as a catalyst for the reaction between ceric sulfate and nitrite or arsenite (86,87) are capable of determining smaH amounts of iodine. However, these catalytic methods are deHcate and require accurate timing, carefiH temperature control, and special apparatus. [Pg.364]

Usually lanthanides are divided into several subgroups the light lanthanides, from La to Nd, medium lanthanides, from Sm to Dy, and heavy lanthanides. Ho to Lu. Alternatively, nomenclature such as ceric RE, from La to Nd, and yttric RE, from Sm to Lu plus Y, is used. [Pg.539]

Siloxene is fluorescent and red chemiluminescence results from oxidation with ceric sulfate, chromic acid, potassium permanganate, nitric acid, and several other strong oxidants. The chemiluminescence spectmm peaks at 600 nm and has been reported (199) to give a maximum brightness of 3.43 cd/m (1 footlambert). [Pg.271]

The chemical properties of phthalocyanines depend mosdy on the nature of the central atom. Phthalocyanines are stable to atmospheric oxygen up to approximately 100°C. Mild oxidation may lead to the formation of oxidation iatermediates that can be reduced to the original products (29). In aqueous solutions of strong oxidants, the phthalocyanine ring is completely destroyed and oxidized to phthalimide. Oxidation ia the presence of ceric sulfate can be used to determine the amount of copper phthalocyanine quantitatively (30). [Pg.504]

Testing of phthalocyanines includes crystallization (qv), flocculation, and appHcation in paints, plastics (qv), and printing inks (1). The ASTM standard specifications include CuPc in dry powder form for various appHcations (153). The specifications cover color (qv), character or tint, oil absorption, reactions in identification tests, and dispersions and storage stabiUty. Quantitative deterrninations are possible with ceric sulfate (30) or sodium vanadate (154). Identification methods are given (155), including tests for different appHcations. [Pg.505]

The dimethyl ethers of hydroquiaones and 1,4-naphthalenediols can be oxidized with silver(II) oxide or ceric ammonium nitrate. Aqueous sodium hypochlorite under phase-transfer conditions has also produced efficient conversion of catechols and hydroquiaones to 1,2- and 1,4-benzoquiaones (116), eg, 4-/-butyl-l,2-ben2oquinone [1129-21-1] ia 92% yield. [Pg.418]

Qualitative. The classic method for the quaUtative determination of silver ia solution is precipitation as silver chloride with dilute nitric acid and chloride ion. The silver chloride can be differentiated from lead or mercurous chlorides, which also may precipitate, by the fact that lead chloride is soluble ia hot water but not ia ammonium hydroxide, whereas mercurous chloride turns black ia ammonium hydroxide. Silver chloride dissolves ia ammonium hydroxide because of the formation of soluble silver—ammonia complexes. A number of selective spot tests (24) iaclude reactions with /)-dimethy1amino-henz1idenerhodanine, ceric ammonium nitrate, or bromopyrogaHol red [16574-43-9]. Silver is detected by x-ray fluorescence and arc-emission spectrometry. Two sensitive arc-emission lines for silver occur at 328.1 and 338.3 nm. [Pg.91]

Etherification and esterification of hydroxyl groups produce derivatives, some of which are produced commercially. Derivatives may also be obtained by graft polymerization wherein free radicals, initiated on the starch backbone by ceric ion or irradiation, react with monomers such as vinyl or acrylyl derivatives. A number of such copolymers have been prepared and evaluated in extmsion processing (49). A starch—acrylonitrile graft copolymer has been patented (50) which rapidly absorbs many hundred times its weight in water and has potential appHcations in disposable diapers and medical suppHes. [Pg.342]

Chemical dosimeters based on ferrous sulfate, ferrous cupric sulfate, or ceric sulfate are generally used. Color-change process indicators are also used, but these cannot measure the radiation dose, only the extent of sterilization. [Pg.409]

Although gravimetric methods have been used traditionally for the determination of large amounts of tellurium, more accurate and convenient volumetric methods are favored. The oxidation of teUurium(IV) by ceric sulfate in hot sulfuric acid solution in the presence of chromic ion as catalyst affords a convenient volumetric method for the determination of tellurium (32). Selenium(IV) does not interfere if the sulfuric acid is less than 2 N in concentration. Excess ceric sulfate is added, the excess being titrated with ferrous ammonium sulfate using o-phenanthroline ferrous—sulfate as indicator. The ceric sulfate method is best appHed in tellurium-rich materials such as refined tellurium or tellurium compounds. [Pg.388]

In order to circumvent this problem, there has been significant activity directed toward the search for a less environmentally toxic and more selective oxidizing agent than chromium. For example, Hoechst has patented a process which uses organorhenium compounds. At a 75% conversion, a mixture of 86% of 2-methyl-l,4-naphthoquinone and 14% 6-methyl-l,4-naphthoquinone was obtained (60). Ceric sulfate (61) and electrochemistry (62,63) have also been used. [Pg.155]

Bromide ndIodide. The spectrophotometric determination of trace bromide concentration is based on the bromide catalysis of iodine oxidation to iodate by permanganate in acidic solution. Iodide can also be measured spectrophotometricaHy by selective oxidation to iodine by potassium peroxymonosulfate (KHSO ). The iodine reacts with colorless leucocrystal violet to produce the highly colored leucocrystal violet dye. Greater than 200 mg/L of chloride interferes with the color development. Trace concentrations of iodide are determined by its abiUty to cataly2e ceric ion reduction by arsenous acid. The reduction reaction is stopped at a specific time by the addition of ferrous ammonium sulfate. The ferrous ion is oxidi2ed to ferric ion, which then reacts with thiocyanate to produce a deep red complex. [Pg.232]

Chemical stabiUty studies are monitored by siUca gel thin-layer chromatography (dc) or by high performance Hquid chromatography (hplc) using a reverse-phase C g coated column (24). Hplc peaks or dc spots are visualized by thek uv absorption at 245 nm the tic spots can also be detected by ceric sulfate or phosphomolybdic acid staining. [Pg.281]

This is typically accompHshed by cooling the titration solution with ice, determining the blank, and titrating rapidly. Another method utilizes deterrnination of the total peroxide and peracid content by use of a ceric sulfate titration to measure hydrogen peroxide followed by a iodide/thiosulfate titration to measure total active oxygen (60). [Pg.146]

H2O2—heavy-metal oxide (31), H IO, ceric ammonium nitrate, KNO2, NaBrO, andNaC102. [Pg.189]

Cerium, at wt 140.12 electron configuration [Xe] is characterized chemically by having two stable valence states, Ce ", cerous, and Ce" ", ceric,... [Pg.365]

The fluorite stmcture, which has a large crystal lattice energy, is adopted by Ce02 preferentially stahi1i2ing this oxide of the tetravalent cation rather than Ce202. Compounds of cerium(IV) other than the oxide, ceric fluoride [10060-10-3] CeF, and related materials, although less stable can be prepared. For example ceric sulfate [13590-82-4] Ce(S0 2> certain double salts are known. [Pg.366]

The tetravalent ceric ion [16065-90-0] Ce , is the only nontrivalent lanthanide ion, apart from stable in aqueous solution. As a result of the... [Pg.367]

Ceric salt solutions are strongly acidic, basic salts tend to form readily, and there are no stable simple salts of weak acids. [Pg.367]

Cerium Oxide. The most stable oxide of cerium is cerium dioxide [1306-38-3] Ce02, also called ceria or ceric oxide. When cerium salts are calcined in air or if oxygen is present, this tetravalent Ce(IV) oxide is formed, cerium sesquioxide [1345-13-7] can be prepared in strongly reducing... [Pg.367]

Hydroxide. Freshly precipitated cerous hydroxide [15785-09-8] Ce(OH)2, is readily oxidized by air or oxygenated water, through poorly defined violet-tinged mixed valence intermediates, to the tetravalent buff colored ceric hydroxide [12014-56-17, Ce(OH)4. The precipitate, which can prove difficult to filter, is amorphous and on drying converts to hydrated ceric oxide, Ce02 2H20. This commercial material, cerium hydrate [23322-64-7] behaves essentially as a reactive cerium oxide. [Pg.367]

Polymerization Initiator. Some unsaturated monomers can be polymerized through the aid of free radicals generated, as transient intermediates, in the course of a redox reaction. The electron-transfer step during the redox process causes the scission of an intermediate to produce an active free radical. The ceric ion, Ce" ", is a strong one-electron oxidizing agent that can readily initiate the redox polymerization of, for example, vinyl monomers in aqueous media at near ambient temperatures (40). The reaction scheme is... [Pg.371]


See other pages where Ceric is mentioned: [Pg.1160]    [Pg.184]    [Pg.184]    [Pg.184]    [Pg.184]    [Pg.184]    [Pg.184]    [Pg.184]    [Pg.184]    [Pg.184]    [Pg.10]    [Pg.233]    [Pg.233]    [Pg.472]    [Pg.544]    [Pg.422]    [Pg.145]    [Pg.291]    [Pg.365]    [Pg.367]    [Pg.367]    [Pg.368]    [Pg.371]   
See also in sourсe #XX -- [ Pg.422 ]

See also in sourсe #XX -- [ Pg.369 , Pg.370 , Pg.371 ]




SEARCH



Alcohols ceric ammonium

Alcohols, benzylic with ceric ammonium nitrate

Ammonium ceric

CAN (ceric ammonium

Ceric acetate

Ceric ammonium nitrate

Ceric ammonium nitrate (CAN

Ceric ammonium nitrate , Mannich

Ceric ammonium nitrate , Mannich reaction

Ceric ammonium nitrate carboxylic acids

Ceric ammonium nitrate copolymers

Ceric ammonium nitrate cycloaddition with

Ceric ammonium nitrate derivatives

Ceric ammonium nitrate oxidant

Ceric ammonium nitrate processes

Ceric ammonium nitrate, and

Ceric ammonium nitrate, cleavage

Ceric ammonium nitrate, oxidation of nitro compounds

Ceric ammonium nitrate, oxidation with

Ceric ammonium nitrate, reaction with epoxides

Ceric ammonium sulfate

Ceric ammonium sulfate oxidant

Ceric ammonium sulfate quinones

Ceric chloride

Ceric hydroxide

Ceric iodate

Ceric ion

Ceric ion initiation

Ceric ion redox

Ceric ion redox initiation systems

Ceric ion systems

Ceric ion, oxidation

Ceric ion-initiated grafting

Ceric nitrate

Ceric nitrate test

Ceric oxide

Ceric oxide-supported catalysts

Ceric perchlorate

Ceric perchlorate, oxidation

Ceric potassium nitrate

Ceric salts

Ceric sulfate

Ceric sulfate crystals

Ceric sulfate solution

Ceric sulphate

Ceric sulphate titration methods

Ceric trifluoroacetate

Ceric-cerous sulfate dosimeter

Ceric-sulfate dosimeter

Diols with ceric ammonium nitrate

Grafting ceric ammonium nitrate

Oxidation with ceric ammonium nitrat

Oxidation with ceric sulphate

Oxidizations with Permanganate, Dichromate, and Ceric Ions Some Titration Methods Involving a Reduction Reaction

Phenols with ceric ammonium nitrate

Quinones with ceric ammonium nitrate

Redox initiators with ceric ions

Some Properties of Cerous and Ceric Salts

Sulfoxides with ceric ammonium nitrate

Titrations with Ceric Ions

With ceric ammonium nitrat

With ceric ammonium nitrate

With ceric sulphate

© 2024 chempedia.info