Cellulose-acetate-butyrate resin

Cellulose-acetate-butyrate resin Poly(amide-imide)... [Pg.1010]

Polycarbonate acrylonitrile-butadiene-styrene alloy Allyl-diglycol- carbonate polymer Diallyl phthalate molding Cellulose acetate Cellulose-acetate-butyrate resin... [Pg.1030]

Cellulose acetate resin Cellulose-acetate-propionate resin Cellulose-acetate-butyrate resin Cellulose nitrate resin Ethyl cellulose resin Rayon... [Pg.1279]

Cellulose- acetate butyrate resin, molding Cellulose-acetate propionate resin, molding Ethyl cellulose Cellulose nitrate ... [Pg.1301]

Cellulose Acetate, Propionate, and Butyrate. Cellulose acetate is prepared by hydrolyzing the triester to remove some of the acetyl groups the plastic-grade resin contains 38-40% acetyl. The propionate and butyrate esters are made by substituting propionic acid and its anhydride (or butyric acid and its anhydride) for some of the acetic acid and acetic anhydride. Plastic grades of cellulose-acetate-propionate resin contain 39-47% propionyl and 2-9% acetyl cellulose-acetate-butyrate resins contain 26-39% butyryl and 12-15% acetyl. [Pg.903]

Butyl ricinoleate, is a plasticizer for polyvinyl butyral, rosin, vinsol resin, and cellulose acetate butyrate resins. Can also be used as a general purpose plasticizer for both nitrocellulose and ethylcellulose. [Pg.194]

Other. 2-Nitro-1-butanol is an excellent solvent for many polyamide resins, cellulose acetate butyrate, and ethylceUulose. It can be utilized in paint removers for epoxy-based coatings. 2-Hydroxymethyl-2-nitro-l,3-propanediol is usebil for control of odors in chemical toilets. Its slow release of formaldehyde ensures prolonged action to control odor, and there is no reodorant problem which sometimes is associated with the use of free formaldehyde. 2-Hydroxymethyl-2-nitro-l,3-propanediol solutions are effective preservative and embalming fluids. The slow Uberation of formaldehyde permits thorough penetration of the tissues before hardening. [Pg.62]

From 1946 to mid-1987, Farbenfabriken Bayer AG in Germany was the European producer of cellulose acetate, cellulose acetate butyrate (CAB), and cellulose acetate propionate (CAP) before closing its faciUties. Bayer s exit from the cellulose acetate mixed esters business leaves Eastman Chemical Co. in the United States as the sole producer of CAB/CAP resins. [Pg.256]

Beaded acrylamide resins (28) are generally produced by w/o inverse-suspension polymerization. This involves the dispersion of an aqueous solution of the monomer and an initiator (e.g., ammonium peroxodisulfates) with a droplet stabilizer such as carboxymethylcellulose or cellulose acetate butyrate in an immiscible liquid (the oil phase), such as 1,2-dichloroethane, toluene, or a liquid paraffin. A polymerization catalyst, usually tetramethylethylenediamine, may also be added to the monomer mixture. The polymerization of beaded acrylamide resin is carried out at relatively low temperatures (20-50°C), and the polymerization is complete within a relatively short period (1-5 hr). The polymerization of most acrylamides proceeds at a substantially faster rate than that of styrene in o/w suspension polymerization. The problem with droplet coagulation during the synthesis of beaded polyacrylamide by w/o suspension polymerization is usually less critical than that with a styrene-based resin. [Pg.9]

With these lacquers, nitrocellulose-based primer-surfacers are used. As well as liquid plasticisers, a wide range of materials are used as plasticising resins short oil alkyds, maleinised oils, ester gum, rosin and bodied castor oils. Pigmentation is usually inert. Thermoplastic acrylics are often preferred under acrylic lacquers these are based on acrylic resins and cellulose acetate butyrate. [Pg.628]

Other commercial thermoplastics include acrylonitrile butadiene styrene (ABS), cellulose acetate butyrate (CAB), polycarbonate (PC), nylon (PA), and acetals. These resins are frequently used in consumer applications. [Pg.41]

Some of the exchanged resins were coated with cellulose acetate butyrate or cellulose acetate phthalate. The results showed relaxation rate enhancement in 25% water suspensions containing 2% carboxymethylcellulose (CMC) as a surfactant. The relaxivities, however, were rather low. It should be noted, however, that the measurements were made at high field, 300 MHz, where the relaxivity enhancements are always smaller. [Pg.281]

Urea-formaldehyde resins ABS copolymer Rigid insulation polyurethane Cellulose acetate butyrate Polyesters (PBT, PCT, PET) PE emulsions PS... [Pg.686]

Adhesion of Coatings. Except for K-l polycarbonate [4,4 -(2-nor-bornylidene)diphenol polycarbonate] (4), an experimental polymer (inherent viscosity 0.85), all the coatings were prepared with commercial products EAB-381-0.5 and EAB-381-20 cellulose acetate butyrates from Eastman Chemical Products, Inc. VYHH vinyl chloride (87%)/vinyl acetate (13%) copolymer from Union Carbide Corp. Butvar B76 poly-(vinyl butyral) from Shawinigan Resins Corp. Plexiglas V poly (methyl methacrylate) from Rohm and Haas Co. Dylene P3I polystyrene from... [Pg.573]

ABA ABS ABS-PC ABS-PVC ACM ACS AES AMMA AN APET APP ASA BR BS CA CAB CAP CN CP CPE CPET CPP CPVC CR CTA DAM DAP DMT ECTFE EEA EMA EMAA EMAC EMPP EnBA EP EPM ESI EVA(C) EVOH FEP HDI HDPE HIPS HMDI IPI LDPE LLDPE MBS Acrylonitrile-butadiene-acrylate Acrylonitrile-butadiene-styrene copolymer Acrylonitrile-butadiene-styrene-polycarbonate alloy Acrylonitrile-butadiene-styrene-poly(vinyl chloride) alloy Acrylic acid ester rubber Acrylonitrile-chlorinated pe-styrene Acrylonitrile-ethylene-propylene-styrene Acrylonitrile-methyl methacrylate Acrylonitrile Amorphous polyethylene terephthalate Atactic polypropylene Acrylic-styrene-acrylonitrile Butadiene rubber Butadiene styrene rubber Cellulose acetate Cellulose acetate-butyrate Cellulose acetate-propionate Cellulose nitrate Cellulose propionate Chlorinated polyethylene Crystalline polyethylene terephthalate Cast polypropylene Chlorinated polyvinyl chloride Chloroprene rubber Cellulose triacetate Diallyl maleate Diallyl phthalate Terephthalic acid, dimethyl ester Ethylene-chlorotrifluoroethylene copolymer Ethylene-ethyl acrylate Ethylene-methyl acrylate Ethylene methacrylic acid Ethylene-methyl acrylate copolymer Elastomer modified polypropylene Ethylene normal butyl acrylate Epoxy resin, also ethylene-propylene Ethylene-propylene rubber Ethylene-styrene copolymers Polyethylene-vinyl acetate Polyethylene-vinyl alcohol copolymers Fluorinated ethylene-propylene copolymers Hexamethylene diisocyanate High-density polyethylene High-impact polystyrene Diisocyanato dicyclohexylmethane Isophorone diisocyanate Low-density polyethylene Linear low-density polyethylene Methacrylate-butadiene-styrene... [Pg.958]

The industrial change and expansion of the nineteenth century had many strands and among them attention was given to man-made replacements for resinous compositions and horn. Alexander Parkes, a prolific inventor and manufacturer, was involved closely with the search for commercial materials he showed articles of Parkesine (a cellulosic) at the Universal Exhibition in London in 1862. Further investigations and development led eventually in Britain, Germany, the USA, and elsewhere to the industry based on a cellulose nitrate plasticized with camphor and (somewhat later) to cellulose acetate and to other cellulose plastics (cellulose acetate butyrate, ethyl cellulose, etc.). [Pg.33]

Used as a plasticizing agent for cellulose acetate butyrate. Used in die production of food contact cellulose nitrate resins, ethyl cellulose resins, PMMA resins, and polyvinyl acetate. [Pg.190]

Acrylic Resin Cellulose Acetate Cellulose Acetate Butyrate LDPE PES... [Pg.941]

Acetal Resin Acrylic Resin Acrylic/PVC Alloy Acrylonitrile Copolymer Amorphous Nylon Cellulose Acetate Cellulose Acetate Butyrate Cellulose Propionate CPVC... [Pg.970]