Catalyst using various

Sharma, R.K. and Bakhshi, N.N. Upgrading of Tall Oil to Fuels and Chemicals Over HZSM-5 Catalyst Using Various Diluents. Can. J. Chem. Eng. 69, 1991. 

Modification of surface chromate species on the Phillips catalyst using various types of organic silanols could be a general procedure for synthesis of various novel Cr-based polymerization catalysts. The reactions are shown in Scheme 20 for Cat-A and Cat-B. The first example of Cat-A was reported by Cann and coworkers through the reaction between TPS and a Phillips catalyst with the original purpose of transformation of the Phillips catalyst into UCC S-2 catalyst in order to avoid the use of toxic and expensive BC [27]. In our opinion, the Cat-A was similar to the UCC S-2 catalyst but differed with respect to the simultaneously formed surface... 

Another general procedure for synthesis of novel Cr-based ethylene polymerization catalysts could be through modification of surface residual hydroxyl groups on a Phillips catalyst using various types of organometallic compounds, which could be chemically anchored on the catalyst surface and provide extra active sites for... 

Cationic polymerization of coal-tar fractions has been commercially achieved through the use of strong protic acids, as well as various Lewis acids. Sulfuric acid was the first polymerization catalyst (11). More recent technology has focused on the Friedel-Crafts polymerization of coal fractions to yield resins with higher softening points and better color. Typical Lewis acid catalysts used in these processes are aluminum chloride, boron trifluoride, and various boron trifluoride complexes (12). Cmde feedstocks typically contain 25—75% reactive components and may be refined prior to polymerization (eg, acid or alkali treatment) to remove sulfur and other undesired components. Table 1 illustrates the typical components found in coal-tar fractions and their corresponding properties. 

Indium chemicals and electroplated metal deposits ate replacing mercury (qv) in the manufacture of alkaline batteries (qv). Indium, like mercury, functions to reduce outgassing within the battery and promotes the uniform corrosion of the anode and cathode while the battery is under electrical load. Indium inorganic chemicals also find use as catalysts in various chemical processes. 

Tetrahydronaphthalene is produced by the catalytic treatment of naphthalene with hydrogen. Various processes have been used, eg, vapor-phase reactions at 101.3 kPa (1 atm) as well as higher pressure Hquid-phase hydrogenation where the conditions are dependent upon the particular catalyst used. Nickel or modified nickel catalysts generally are used commercially however, they are sensitive to sulfur, and only naphthalene that has very low sulfur levels can be used. Thus many naphthalene producers purify their product to remove the thionaphthene, which is the principal sulfur compound present. Sodium treatment and catalytic hydrodesulfuri2ation processes have been used for the removal of sulfur from naphthalene the latter treatment is preferred because of the ha2ardous nature of sodium treatment. 

Chemical Hazards. Chemical manufacturers and employees contend with various ha2ards inherent ia productioa of evea commonplace materials. For example, some catalysts used ia the manufacture of polyethylene (see Olefin polymers) ignite when exposed to air or explode if allowed to become too warm the basic ingredient ia fluorocarboa polymers, eg, Tefloa (see Fluorine compounds, organic), can become violently self-reactive if overheated or contaminated with caustic substances (45,46) one of the raw materials for the manufacture of acryflc fibers (see Fibers, acrylic) is the highly toxic hydrogen cyanide (see Cyanides). 

Propylene oxide is also produced in Hquid-phase homogeneous oxidation reactions using various molybdenum-containing catalysts (209,210), cuprous oxide (211), rhenium compounds (212), or an organomonovalent gold(I) complex (213). Whereas gas-phase oxidation of propylene on silver catalysts results primarily in propylene oxide, water, and carbon dioxide as products, the Hquid-phase oxidation of propylene results in an array of oxidation products, such as propylene oxide, acrolein, propylene glycol, acetone, acetaldehyde, and others. 

Hydrogenation. Gas-phase catalytic hydrogenation of succinic anhydride yields y-butyrolactone [96-48-0] (GBL), tetrahydrofiiran [109-99-9] (THF), 1,4-butanediol (BDO), or a mixture of these products, depending on the experimental conditions. Catalysts mentioned in the Hterature include copper chromites with various additives (72), copper—zinc oxides with promoters (73—75), and mthenium (76). The same products are obtained by hquid-phase hydrogenation catalysts used include Pd with various modifiers on various carriers (77—80), Ru on C (81) or Ru complexes (82,83), Rh on C (79), Cu—Co—Mn oxides (84), Co—Ni—Re oxides (85), Cu—Ti oxides (86), Ca—Mo—Ni on diatomaceous earth (87), and Mo—Ba—Re oxides (88). Chemical reduction of succinic anhydride to GBL or THF can be performed with 2-propanol in the presence of Zr02 catalyst (89,90). 

The toluenesulfonic acid prepared as an iatermediate ia the preparation ofpara-cmso also has a modest use as a catalyst for various esterifications and condensations. Sodium salts of the toluenesulfonic acids are also used ia surfactant formulations. Annual use of toluene for sulfonation is ca 100,000-150,000 t (30-45 x 10 gal). 

Another important use of BCl is as a Ftiedel-Crafts catalyst ia various polymerisation, alkylation, and acylation reactions, and ia other organic syntheses (see Friedel-Crafts reaction). Examples include conversion of cyclophosphasenes to polymers (81,82) polymerisation of olefins such as ethylene (75,83—88) graft polymerisation of vinyl chloride and isobutylene (89) stereospecific polymerisation of propylene (90) copolymerisation of isobutylene and styrene (91,92), and other unsaturated aromatics with maleic anhydride (93) polymerisation of norhornene (94), butadiene (95) preparation of electrically conducting epoxy resins (96), and polymers containing B and N (97) and selective demethylation of methoxy groups ortho to OH groups (98). 

Boron Bromide. Approximately 30% of BBr produced in the United States is consumed in the manufacture of proprietory pharmaceuticals (qv) (7). BBr is used in the manufacture of isotopicaHy enriched crystalline boron, as a Etiedel-Crafts catalyst in various polymerization, alkylation, and acylation reactions, and in semiconductor doping and etching. Examples of use of BBr as a catalyst include copolymerization of butadiene with olefins (112) polymerization of ethylene and propylene (113), and A/-vinylcarbazole (114) in hydroboration reactions and in tritium labeling of steroids and aryl rings (5). 

Other Rea.ctlons, The anhydride of neopentanoic acid, neopentanoyl anhydride [1538-75-6] can be made by the reaction of neopentanoic acid with acetic anhydride (25). The reaction of neopentanoic acid with acetone using various catalysts, such as titanium dioxide (26) or 2irconium oxide (27), gives 3,3-dimethyl-2-butanone [75-97-8] commonly referred to as pinacolone. Other routes to pinacolone include the reaction of pivaloyl chloride [3282-30-2] with Grignard reagents (28) and the condensation of neopentanoic acid with acetic acid using a rare-earth oxide catalyst (29). Amides of neopentanoic acid can be prepared direcdy from the acid, from the acid chloride, or from esters, using primary or secondary amines. 

Catalysts. Historically, cmde clays have been used to some extent in petroleum refining (20). More recently, however, processed clays are increasingly used as raw materials and converted to more reactive catalyst products. Various proprietary processes are used and numerous patents have been issued. 

Prepa.ra.tlon, There are several methods described in the Hterature using various cobalt catalysts to prepare syndiotactic polybutadiene (29—41). Many of these methods have been experimentally verified others, for example, soluble organoaluminum compounds with cobalt compounds, are difficult to reproduce (30). A cobalt compound coupled with triphenylphosphine aluminum alkyls water complex was reported byJapan Synthetic Rubber Co., Ltd. (fSR) to give a low melting point (T = 75-90° C), low crystallinity (20—30%) syndiotactic polybutadiene (32). This polymer is commercially available. 

Silver trifluoroacetate is a suitable catalyst for various cationic rearrangements involving multiple carbon-carbon bonds [49 5(1] In the presence of silver trifluoroacetate, 2 propynyl acetates rearrange to the butadienyl acetates to give dienes that are useful in Diels-Alder reactions [49] (equation 22)... 

Triflates of titanium and tin are effective catalysts for various condensations of carbonyl compounds [I2I, 122, 123, 124, 125] Claisen and Dieckmann type condensations between ester functions proceed under mild conditions in the presence of dichlorobis(trifluoromethanesulfonyloxy)titaiiiuin(rV) and a tertiary amine (equations 59 and 60) These highly regio- and stereoselective condensations were used successfully m the synthesis of carbohydrates [122]... 

BF3 is used extensively as a catalyst in various industrial processes (p. 199) and can be prepared on a large scale by the fluorination of boric oxide or borates with fluorspar and concentrated H2SO4 ... 

Tetrabutylammonium fluoride (TBAF) is usually used in the form of the trihydrate or as a solution in tetrahydrofuran (THF). The pure form is difficult to isolate, owing to decomposition to FFF, tributylamine, and but-l-ene [18, 19] on dehydration. It has been used for a variety of reactions, including as a catalyst for various reactions with silicon compounds [20, 21]. One of its main uses is in the cleavage of silyl ether protecting groups [22]. 

Table 3 Results of Characterization of Modified PS Prepared by Using Various Catalysts...

Figure 3 IR spectra of (1) virgin PS and (2-5) acylated PS synthesized by using various catalysts (2) FeCL, (3) SnCU, (4) TiCU, (5) BF3-OEt2.

Methyl ethyl ketone may also he produced hy the catalyzed dehydrogenation of sec-hutanol over zinc oxide or brass at about 500°C. The yield from this process is approximately 95%. MEK is used mainly as a solvent in vinyl and acrylic coatings, in nitrocellulose lacquers, and in adhesives. It is a selective solvent in dewaxing lubricating oils where it dissolves the oil and leaves out the wax. MEK is also used to synthesize various compounds such as methyl ethyl ketone peroxide, a polymerization catalyst used to form acrylic and polyester polymers and methyl pentynol by reacting with acetylene ... 

---