Catalyst palladium-barium sulfate

Catalytic hydrogenation of dimethyl 3-methyl-3//-3-benzazepine-2,4-dicarboxylate (10) to the 1,2,4,5-tetrahydro derivative with hydrogen and a palladium-barium sulfate catalyst, followed by treatment of the reaction mixture with iodomethane in refluxing methanol, yields a mixture of the 2,4-dicarboxylic acid 11 and the methiodide salt 12.24... 

In the second step, the triple bond in 63 is selectively reduced to the cz -alkene using the Lindlar catalyst to form 64. In this case, the Lindlar catalyst is a poisoned heterogeneous palladium catalyst on barium sulfate. The deactivation of the catalyst with quinoline is responsible for the selective hydrogenation to the alkene and not through to the alkane. The reason for the highly stereoselective reduction with syn-addition to the cw-alkene is that one face of the triple bond is shielded by the catalyst surface. 

Other possible carriers for catalysts are asbestos, pumice, kieselgur, silica gel, silica, active charcoal, and oxides, carbonates, and sulfates of magnesium, calcium, barium, zinc, aluminum, iron, chromium, and zirconium. Details for the preparation of palladium catalysts on barium sulfate have been recorded by Mozingo.137... 

Preparation of the palladium-barium sulfate catalyst has been described by Mozingo.456... 

Under suitable conditions it is possible to isolate the A-substituted hydroxylamines that are formed as intermediates in the reduction of nitro compounds. For this purpose it is essential in the reduction of aromatic nitro compounds to work with neutral or nearly neutral solutions suitable reducing agents are hydrogen and platinum oxide catalysts in glacial acetic acid,82,83 zinc dust in ammonium chloride solution,84 aluminum amalgam,85 and ammonium sulfide.86 Aliphatic nitro compounds may be reduced as their alkali salts (nitronates) by diborane in tetrahydrofuran, then giving A-alkylhydroxyl-amines 87 for instance, A-cyclohexylhydroxylamine is thus obtained from nitrocyclohexane in 53% yield. However, aliphatic nitro compounds are converted into A-alkylhydroxylamines more simply by catalytic hydrogenation in the presence of palladium-barium sulfate unlike aromatic nitro compounds, aliphatic nitro compounds require an acid medium for reduction to hydroxylamines an oxalic acid medium has proved the most suitable. 

Catalytic hydrogenation of oximes to amines requires conditions resembling those for catalytic hydrogenation of nitro compounds and nitriles.20d The catalyst should be as active as possible, e.g., Raney nickel101 (if necessary, platinized), platinum oxide,102 palladium-charcoal,103 palladium-barium sulfate,104 or rhodium-alumina.105 This rhodium catalyst also serves for reduction of an amidoxime to the amidine.106 Hydrogenation may be effected under pressure, but the temperature should be kept as low as possible to avoid formation of secondary amines. 

Catalyst—Continued palladium-barium sulfate, 21, 85, 110 piperidine benzoate, 25, 42 poison, for use in Rosenmund reduc-... 

Preparation by dehydrogenation of 6-acetyl-3,5-dimethyl-2-cyclohexen-l-one with a 5% palladium-barium sulfate catalyst at reflux [2612],... 

The reaction is used for the chain extension of aldoses in the synthesis of new or unusual sugars In this case the starting material l arabinose is an abundant natural product and possesses the correct configurations at its three chirality centers for elaboration to the relatively rare l enantiomers of glucose and mannose After cyanohydrin formation the cyano groups are converted to aldehyde functions by hydrogenation m aqueous solution Under these conditions —C=N is reduced to —CH=NH and hydrolyzes rapidly to —CH=0 Use of a poisoned palladium on barium sulfate catalyst prevents further reduction to the alditols... 

Hydrogenation. Hydrogenation is one of the oldest and most widely used appHcations for supported catalysts, and much has been written in this field (55—57). Metals useflil in hydrogenation include cobalt, copper, nickel, palladium, platinum, rhenium, rhodium, mthenium, and silver, and there are numerous catalysts available for various specific appHcations. Most hydrogenation catalysts rely on extremely fine dispersions of the active metal on activated carbon, alumina, siHca-alumina, 2eoHtes, kieselguhr, or inert salts, such as barium sulfate. 

The catalyst commonly used in this method is 5 wt % palladium supported on barium sulfate inhibited with quinoline—sulfur, thiourea, or thiophene to prevent reduction of the product aldehyde. A procedure is found in the Hterature (57). Suitable solvents are toluene, benzene, and xylene used under reflux conditions. Interestingly, it is now thought that Rosenmund s method (59) originally was successful because of the presence of sulfur compounds in the xylene used, since the need for an inhibitor to reduce catalyst activity was not described until three years later (60). 

This reaction is favored by moderate temperatures (100—150°C), low pressures, and acidic solvents. High activity catalysts such as 5—10 wt % palladium on activated carbon or barium sulfate, high activity Raney nickel, or copper chromite (nonpromoted or promoted with barium) can be used. Palladium catalysts are recommended for the reduction of aromatic aldehydes, such as that of benzaldehyde to toluene. 

Catalysts reduced with formaldehyde carry no adsorbed hydrogen and are less pyrophoric. Barium carbonate as a support may sometimes be advantageous in that the neutrality of the h3 drogenation mixture may be maintained. Barium sulfate or barium carbonate may be a better support than carbon, which may, in some instances, so strongly adsorb the derived product that recovery is difficult or incomplete. Palladium may be more completely and easily recovered from a spent catalyst where carbon rather than barium sulfate is the support. In general, the submitter prefers a catalyst prepared according to procedure C. 

As catalyst for the Rosenmund reaction palladium on a support, e.g. palladium on barium sulfate, is most often used. The palladium has to be made less active in order to avoid further reduction of the aldehyde to the corresponding alcohol. Such a poisoned catalyst is obtained for example by the addition of quinoline and sulfur. Recent reports state that the reactivity of the catalyst is determined by the morphology of the palladium surface." ... 

Many workers (5,6,7,87) have compared various metals for the selective hydrogenation of lower acetylenes to olefins, and it was always found that palladium was by far the most selective. This conclusion concurs with the usual synthetic experience, but under special circumstances other metals, such as platinum, may prove more useful (35,63). The catalyst support may also have an influence (21,65). Carbon, calcium carbonate, and barium sulfate are frequently used supports. Examples of some differences are noted later,... 

Support has been shown to influence selectivity and some workers have obtained higher yields of cis isomer over palladium-on-calcium carbonate or palladium-on-barium sulfate 21), whereas others find carbon satisfactory. In general, carbon support makes the more active catalyst and it is, therefore, more prone to become hydrogen poor. 

Choice of catalyst and solvent allowed considerable flexibility in hydrogenation of 8. With calcium carbonate in ethanol-pyridine, the sole product was the trans isomer 9, but with barium sulfate in pure pyridine the reaction came to a virtual halt after absorption of 2 equiv of hydrogen and traws-2-[6-cyanohex-2(Z)-enyl]-3-(methoxycarbonyl)cyclopentanone (7) was obtained in 90% yield together with 10% of the dihydro compound. When palladium-on-carbon was used in ethyl acetate, a 1 1 mixture of cis and trans 9 was obtained on exhaustive hydrogenation (S6). It is noteworthy that in preparation of 7 debenzylation took precedence over double-bond saturation. 

Palladium catalysts resemble closely the platinum catalysts. Palladium oxide (PdO) is prepared from palladium chloride and sodium nitrate by fusion at 575-600° [29,30]. Elemental palladium is obtained by reduction of palladium chloride with sodium borohydride [27, 31], Supported palladium catalysts are prepared with the contents of 5% or 10% of palladium on charcoal, calcium carbonate and barium sulfate [32], Sometimes a special support can increase the selectivity of palladium. Palladium on strontium carbonate (2%) was successfully used for reduction of just y, (5-double bond in a system of oc, / , y, (5-unsaturated ketone [ii]. 

Palladium catalysts are more often modified for special selectivities than platinum catalysts. Palladium prepared by reduction of palladium chloride with sodium borohydride Procedure 4, p. 205) is suitable for the reduction of unsaturated aldehydes to saturated aldehydes [i7]. Palladimn on barium sulfate deactivated with sulfur compounds, most frequently the so-called quinoline-5 obtained by boiling quinoline with sulfur [34], is suitable for the Rosenmund reduction [i5] (p. 144). Palladium on calcium carbonate deactivated by lead acetate Lindlar s catalyst) is used for partial hydrogenation of acetylenes to cw-alkenes [36] (p. 44). 

---