Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Carboxylation olefin

Reactions leading to unsaturated compounds in place of the dicarboxylated ones can also be obtained. An early example is offered by Heck s finding that methoxycar-bonyhnercury acetate can carboxylate olefins by methoxycarbonyl transfer to palladium added as acetate,for example (Scheme 7). [Pg.942]

The less hindered f/ans-olefins may be obtained by reduction with lithium or sodium metal in liquid ammonia or amine solvents (Birch reduction). This reagent, however, attacks most polar functional groups (except for carboxylic acids R.E.A. Dear, 1963 J. Fried, 1968), and their protection is necessary (see section 2.6). [Pg.100]

The boric and sulfuric acids are recycled to a HBF solution by reaction with CaF2. As a strong acid, fluoroboric acid is frequently used as an acid catalyst, eg, in synthesizing mixed polyol esters (29). This process provides an inexpensive route to confectioner s hard-butter compositions which are substitutes for cocoa butter in chocolate candies (see Chocolate and cocoa). Epichlorohydrin is polymerized in the presence of HBF for eventual conversion to polyglycidyl ethers (30) (see Chlorohydrins). A more concentrated solution, 61—71% HBF, catalyzes the addition of CO and water to olefins under pressure to form neo acids (31) (see Carboxylic acids). [Pg.165]

Olefins are carbonylated in concentrated sulfuric acid at moderate temperatures (0—40°C) and low pressures with formic acid, which serves as the source of carbon monoxide (Koch-Haaf reaction) (187). Liquid hydrogen fluoride, preferably in the presence of boron trifluoride, is an equally good catalyst and solvent system (see Carboxylic acids). [Pg.563]

Interest in synthetic naphthenic acid has grown as the supply of natural product has fluctuated. Oxidation of naphthene-based hydrocarbons has been studied extensively (35—37), but no commercially viable processes are known. Extensive purification schemes must be employed to maximize naphthene content in the feedstock and remove hydroxy acids and nonacidic by-products from the oxidation product. Free-radical addition of carboxylic acids to olefins (38,39) and addition of unsaturated fatty acids to cycloparaffins (40) have also been studied but have not been commercialized. [Pg.511]

Reaction conditions depend on the reactants and usually involve acid or base catalysis. Examples of X include sulfate, acid sulfate, alkane- or arenesulfonate, chloride, bromide, hydroxyl, alkoxide, perchlorate, etc. RX can also be an alkyl orthoformate or alkyl carboxylate. The reaction of cycHc alkylating agents, eg, epoxides and a2iridines, with sodium or potassium salts of alkyl hydroperoxides also promotes formation of dialkyl peroxides (44,66). Olefinic alkylating agents include acycHc and cycHc olefinic hydrocarbons, vinyl and isopropenyl ethers, enamines, A[-vinylamides, vinyl sulfonates, divinyl sulfone, and a, P-unsaturated compounds, eg, methyl acrylate, mesityl oxide, acrylamide, and acrylonitrile (44,66). [Pg.109]

Apparently the alkoxy radical, R O , abstracts a hydrogen from the substrate, H, and the resulting radical, R" , is oxidized by Cu " (one-electron transfer) to form a carbonium ion that reacts with the carboxylate ion, RCO - The overall process is a chain reaction in which copper ion cycles between + 1 and +2 oxidation states. Suitable substrates include olefins, alcohols, mercaptans, ethers, dienes, sulfides, amines, amides, and various active methylene compounds (44). This reaction can also be used with tert-huty peroxycarbamates to introduce carbamoyloxy groups to these substrates (243). [Pg.131]

The tert-huty hydroperoxide is then mixed with a catalyst solution to react with propylene. Some TBHP decomposes to TBA during this process step. The catalyst is typically an organometaHic that is soluble in the reaction mixture. The metal can be tungsten, vanadium, or molybdenum. Molybdenum complexes with naphthenates or carboxylates provide the best combination of selectivity and reactivity. Catalyst concentrations of 200—500 ppm in a solution of 55% TBHP and 45% TBA are typically used when water content is less than 0.5 wt %. The homogeneous metal catalyst must be removed from solution for disposal or recycle (137,157). Although heterogeneous catalysts can be employed, elution of some of the metal, particularly molybdenum, from the support surface occurs (158). References 159 and 160 discuss possible mechanisms for the catalytic epoxidation of olefins by hydroperoxides. [Pg.138]

Garboxylation Reaction. The carboxylation reaction represents the conversion of acetylene and olefins into carboxyHc acids (qv) or their derivatives. The industrially important Reppe process is used in the synthesis of P-unsaturated esters from acetylene. Nickel carbonyl is the catalyst of choice (134). [Pg.69]

The alkanoic acids, with the exception of formic acid, undergo typical reactions of the carboxyl group. Formic acid has reducing properties and does not form an acid chloride or an anhydride. The hydrocarbon chain of alkanoic acids undergoes the usual reactions of hydrocarbons except that the carboxyl group exerts considerable influence on the site and ease of reaction. The alkenoic acids in which the double bond is not conjugated with the carboxyl group show typical reactions of internal olefins. All three types of reactions are industrially important. [Pg.84]

Selective hydrogenation of the carboxyl or ester group in preference to the olefinic unsaturation also produces unsaturated alcohols. [Pg.85]

Carboxylation/Oxidation of Straight-Chain 1-Olefins. Selective carboxylation of a-olefins to predominately straight-chain aldehydes is realized through specific catalyst systems and by careful control of reaction conditions. The aldehyde produced is then air-oxidized to the acid using a Mn catalyst. Heptanoic acid [111-14-8] and pelargonic acid [112-05-0] are produced commercially in this manner. [Pg.92]

Highly Branched Acids. These acids, called neoacids, are produced from highly branched olefins, carbon monoxide, and an acid catalyst such as sulfuric acid, hydrogen fluoride, or boron trifluoride. 2,2,2-Trimethylacetic acid (pivaUc acid) is made from isobutylene and neodecanoic acid is produced from propylene trimer (see Carboxylic Acids, trialkylacetic acids). [Pg.92]

Rhodium catalyst is used to convert linear alpha-olefins to heptanoic and pelargonic acids (see Carboxylic acids, manufacture). These acids can also be made from the ozonolysis of oleic acid, as done by the Henkel Corp. Emery Group, or by steam cracking methyl ricinoleate, a by-product of the manufacture of nylon-11, an Atochem process in France (4). Neoacids are derived from isobutylene and nonene (4) (see Carboxylic acids, trialkylacetic acids). [Pg.94]

Neo acids are prepared from selected olefins using carbon monoxide and acid catalyst (4) (see Carboxylic Acids, trialkylacetic acids). 2-EthyIhexanoic acid is manufactured by an aldol condensation of butyraldehyde followed by an oxidation of the resulting aldehyde (5). Isopalmitic acid [4669-02-7] is probably made by an aldol reaction of octanal. [Pg.100]

There have been other approaches to obtaining rubber/metal adhesion besides primers or additives consisting of phenolics or epoxies plus halogenated elastomers. For example, carboxylated polymers (olefins and diolefins copolymerized with acrylic acid monomers) have shown excellent adhesion to metals. Very little carboxyl is necessary, and polymers with carboxyl contents as low as 0.1% show good adhesion when laminated to bare steel. When these materials possess... [Pg.453]

Most rosin utilization takes advantage of the carboxyl and olefinic functionalities of the resin acids. [Pg.601]

Homer-Emmons reagents react with trifluoromethyl ketones to form tnfluo romethylated olefins, however, the double bond can isomerize out of conjugation with the carboxylic acid group with the product olefin that bears a y-proton [37] (equation 30)... [Pg.632]

The pyrolysis of perfluoro carboxylic salts can result both in mono and bimolecular products At 210-220 °C, silver salts give mostly the coupled products, at 160-165 °C in A -methylpyrrolidinone, the corresponding copper salts also give the simple decarboxylated compounds in nearly equal amounts The decomposition of the copper salts m the presence of lodobenzene at 105-125 °C results m a phenyl derivative, in addition to the olefin and coupled product [94] (equations 60-62)... [Pg.906]


See other pages where Carboxylation olefin is mentioned: [Pg.346]    [Pg.165]    [Pg.87]    [Pg.306]    [Pg.461]    [Pg.279]    [Pg.280]    [Pg.346]    [Pg.165]    [Pg.87]    [Pg.306]    [Pg.461]    [Pg.279]    [Pg.280]    [Pg.655]    [Pg.12]    [Pg.70]    [Pg.258]    [Pg.335]    [Pg.590]    [Pg.470]    [Pg.728]    [Pg.166]    [Pg.343]    [Pg.144]    [Pg.164]    [Pg.193]    [Pg.92]    [Pg.2094]    [Pg.455]    [Pg.59]    [Pg.238]    [Pg.323]    [Pg.54]    [Pg.297]   
See also in sourсe #XX -- [ Pg.186 ]




SEARCH



Carboxylated olefin copolymer

Carboxylation of olefins

Carboxylation, of olefins with

Carboxylic Acids reaction with olefins

Carboxylic acids, aromatic, olefinic

Carboxylic acids, aromatic, olefinic reduction

Carboxylic acids, olefinic

Carboxylic acids, olefinic reduction

Carboxylic esters, carbonyl olefination

Olefin oxidative carboxylation

Olefins and Functional Derivatives in the Presence of Carboxylic Acids, Thiols, Amines or Hydrogen Chloride

Olefins carboxylic acid addition

Oxidative carboxylation of olefins

Oxidative cleavage of olefins to ketones and carboxylic acids by the usual oxidants

Substituted -Butyrolactones From Carboxylic Acids and Olefins 7-(-Octyl)-y-Butyrolactone

WITTIG OLEFINATION, OF PERFLUORO ALKYL CARBOXYLIC ESTERS

© 2024 chempedia.info