Carboxylic Acids reaction with olefins

Vicinal iodo carboxylates may also be prepared from the reaction of olefins either with iodine and potassium iodate in acetic acid/ or with N-iodosuccinimide and a carboxylic acid in chloroform. " A number of new procedures for effecting the hydroxylation or acyloxylation of olefins in a manner similar to the Prevost or Woodward-Prevost reactions include the following iodo acetoxylation with iodine and potassium chlorate in acetic acid followed by acetolysis with potassium acetate reaction with iV-bromoacetamide and silver acetate in acetic acid reaction with thallium(III) acetate in acetic acid and reaction with iodine tris(trifluoroacetate) in pentane. ... 

The procedure described here allows for a convenient and efficient preparation in very high yields of large quantities of bromides from carboxylic acids containing an olefinic functionality. The Hunsdiecker reaction is traditionally accomplished by treating anhydrous silver carboxylates with bromine or iodine.2 Heavy metal salts such as mercury,3 lead,4 and thallium5 have also been used successfully as well as tert-butyl hypoiodite.6 The major disadvantages associated with the above methods, such as use of heavy metal salts and non-tolerance towards olefins, has led to the development of a more versatile method using O-acyl thiohydroxamates.7 8 The O-... 

While die above reactions will provide carboxylic acid products, each has problems associated with it. The cleavage of olefins to carboxylic acids [reaction (7.1)] can be carried out using potassium permanganate or by ozonolysis at low temperature followed by oxidative workup with hydrogen peroxide. Neither of diese mediods is very useful since only symmetric olefins provide a single carboxylic acid product. Unsymmetrical olefins give a mixture of two acids which must be separated. Furthermore the most useful synthetic processes are those which build up structures, whereas these reactions are degradative in nature. 

Nowadays, it is an accepted mechanistic model [5, 6] that the photolysis step (which proceeds under thermo-reversible CO insertion) leads to species best described as chromium ketene complexes of type 7 (Scheme 2). Indeed, these intermediates exhibit a ketene-like reactivity they undergo [2 + 2] cycloaddition reactions with olefins, imines and enol ethers, whereas reaction with nucleophiles leads to carboxylic acid derivatives. 

In organic solvents, ozone undergoes a classic reaction with olefins, reacting rapidly and almost quantitatively with most of these compounds. Carbonyl compounds and carboxylic acids are the products of this reaction. The traditional Crie-gee (cf. Bailey, 1958) mechanism is generally agreed to provide the best rationaliza-... 

In 2012 Ryu and his colleagues reported the iron-catalyzed decarbonylation of aliphatic carboxylic acids to a-olefins (Scheme 11.7) [32]. In their mechanism study, they found the formation of CO but not CO2. If the reaction was carried out under low or no pressure (0-5 bar) of carbon monoxide, internal an olefin was observed [33]. In the proposed reaction mechanism, the reaction starts from acid anhydride, which was produced from the reaction of substrate and AC2O. Then it reacts with the in situ-formed iron-carbonyl complex, which was generated by FeCl2, phosphine ligand, KI, and CO, and decarbonylation occurred under high temperatures. Notably, Fe2(CO)9, Fe3(CO)i2, [Fe(CO)2Cp]2 did not give the decarbonylation product. 

Rh-Catalyzed Reactions Zhao and coworkers have shown that the reaction of ortho-substituted arene carboxylic acids with electron-deficient olefins in the presence of ahydrorhodium(I) complex as the catalyst gave the Mizoroki-Heck products (8) and the conjugate addition products (9) with high selectivity (Scheme 22.18a) [13, 26]. The selectivity depends on the content of water in the reaction mixture higher water content favored the hydrolysis of the enolato intermediate 10, while lower water content favored P-H elimination. This reaction works only for ortho-suhstituted arene carboxylic acids and with electron-deficient olefins (Scheme 22.18h). 

Synthesis of Keto-acids.—a-Keto-acids are obtained in moderate to good yields by the reaction of carboxylic acid dianions with conjugated nitro-olefins at — 100°C, followed by acidic work-up. Another route to these compounds involves the C-silylation of butyrolactone enolate, followed by a Peterson-type olefination to give the vinylic ether (20), which is then oxidized to the y-keto-acid (Scheme 12). Eight examples, with yields of between 50 and 83%, along with one failure are reported. 

Cleavage of 0-0 bonds from hydroperoxides further assure photodecomposition together with aUcoxy radicals P-scissions afterwards. Another route to polymer photodegradation resides in the further reactions of the hydroperoxides to generate other chromophores and/or new functional entities, such as carbonyls, carboxylic acids, alcohols and olefins, which further contribute to main chain scissions [6] (Scheme 1). 

The boric and sulfuric acids are recycled to a HBF solution by reaction with CaF2. As a strong acid, fluoroboric acid is frequently used as an acid catalyst, eg, in synthesizing mixed polyol esters (29). This process provides an inexpensive route to confectioner s hard-butter compositions which are substitutes for cocoa butter in chocolate candies (see Chocolate and cocoa). Epichlorohydrin is polymerized in the presence of HBF for eventual conversion to polyglycidyl ethers (30) (see Chlorohydrins). A more concentrated solution, 61—71% HBF, catalyzes the addition of CO and water to olefins under pressure to form neo acids (31) (see Carboxylic acids). 

Olefins are carbonylated in concentrated sulfuric acid at moderate temperatures (0—40°C) and low pressures with formic acid, which serves as the source of carbon monoxide (Koch-Haaf reaction) (187). Liquid hydrogen fluoride, preferably in the presence of boron trifluoride, is an equally good catalyst and solvent system (see Carboxylic acids). 

Reaction conditions depend on the reactants and usually involve acid or base catalysis. Examples of X include sulfate, acid sulfate, alkane- or arenesulfonate, chloride, bromide, hydroxyl, alkoxide, perchlorate, etc. RX can also be an alkyl orthoformate or alkyl carboxylate. The reaction of cycHc alkylating agents, eg, epoxides and a2iridines, with sodium or potassium salts of alkyl hydroperoxides also promotes formation of dialkyl peroxides (44,66). Olefinic alkylating agents include acycHc and cycHc olefinic hydrocarbons, vinyl and isopropenyl ethers, enamines, A[-vinylamides, vinyl sulfonates, divinyl sulfone, and a, P-unsaturated compounds, eg, methyl acrylate, mesityl oxide, acrylamide, and acrylonitrile (44,66). 

Nonclassical Wittig reaction, olefination by phosphoranes interaction with carboxylic acid derivatives, in transformation of heterocycles 99JCS(P1)3049. 

A cursory inspection of key intermediate 8 (see Scheme 1) reveals that it possesses both vicinal and remote stereochemical relationships. To cope with the stereochemical challenge posed by this intermediate and to enhance overall efficiency, a convergent approach featuring the union of optically active intermediates 18 and 19 was adopted. Scheme 5a illustrates the synthesis of intermediate 18. Thus, oxidative cleavage of the trisubstituted olefin of (/ )-citronellic acid benzyl ester (28) with ozone, followed by oxidative workup with Jones reagent, affords a carboxylic acid which can be oxidatively decarboxylated to 29 with lead tetraacetate and copper(n) acetate. Saponification of the benzyl ester in 29 with potassium hydroxide provides an unsaturated carboxylic acid which undergoes smooth conversion to trans iodolactone 30 on treatment with iodine in acetonitrile at -15 °C (89% yield from 29).24 The diastereoselectivity of the thermodynamically controlled iodolacto-nization reaction is approximately 20 1 in favor of the more stable trans iodolactone 30. 

A synthetically useful virtue of enol triflates is that they are amenable to palladium-catalyzed carbon-carbon bond-forming reactions under mild conditions. When a solution of enol triflate 21 and tetrakis(triphenylphosphine)palladium(o) in benzene is treated with a mixture of terminal alkyne 17, n-propylamine, and cuprous iodide,17 intermediate 22 is formed in 76-84% yield. Although a partial hydrogenation of the alkyne in 22 could conceivably secure the formation of the cis C1-C2 olefin, a chemoselective hydrobora-tion/protonation sequence was found to be a much more reliable and suitable alternative. Thus, sequential hydroboration of the alkyne 22 with dicyclohexylborane, protonolysis, oxidative workup, and hydrolysis of the oxabicyclo[2.2.2]octyl ester protecting group gives dienic carboxylic acid 15 in a yield of 86% from 22. 

The observation that addition of imidazoles and carboxylic acids significantly improved the epoxidation reaction resulted in the development of Mn-porphyrin complexes containing these groups covalently linked to the porphyrin platform as attached pendant arms (11) [63]. When these catalysts were employed in the epoxidation of simple olefins with hydrogen peroxide, enhanced oxidation rates were obtained in combination with perfect product selectivity (Table 6.6, Entry 3). In contrast with epoxidations catalyzed by other metals, the Mn-porphyrin system yields products with scrambled stereochemistry the epoxidation of cis-stilbene with Mn(TPP)Cl (TPP = tetraphenylporphyrin) and iodosylbenzene, for example, generated cis- and trans-stilbene oxide in a ratio of 35 65. The low stereospecificity was improved by use of heterocyclic additives such as pyridines or imidazoles. The epoxidation system, with hydrogen peroxide as terminal oxidant, was reported to be stereospecific for ris-olefins, whereas trans-olefins are poor substrates with these catalysts. 

According to the above reaction scheme the carbonylation reaction has to be carried out in two steps In the absence of water the olefin is first converted at 20-80°C and 20-100 bar by the aid of mineralic acid and carbon monoxide into an acyliumion. In a second step the acyliumion reacts with water to the carboxylic acid. The mineral acid catalyst is recovered and can be recycled. The formation of tertiary carboxylic acids (carboxylic acids of the pivalic acid type) is enhanced by rising temperature and decreasing CO pressure in the first step of the reaction. Only tertiary carboxylic acids are formed from olefins that have at the same C atom a branching and a double bond (isobutylene-type olefins). 

If cobalt carbonylpyridine catalyst systems are used, the formation of unbranched carboxylic acids is strongly favored not only by reaction of a-olefins but also by reaction of olefins with internal double bonds ( contrathermo-dynamic double-bond isomerization) [59]. The cobalt carbonylpyridine catalyst of the hydrocarboxylation reaction resembles the cobalt carbonyl-terf-phos-phine catalysts of the hydroformylation reaction. The reactivity of the cobalt-pyridine system in the hydrocarboxylation reaction is remarkable higher than the cobalt-phosphine system in the hydroformylation reaction, especially in the case of olefins with internal double bonds. This reaction had not found an industrial application until now. 

---