Carbopalladation

The Pd—C cr-bond can be prepared from simple, unoxidized alkenes and aromatic compounds by the reaction of Pd(II) compounds. The following are typical examples. The first step of the reaction of a simple alkene with Pd(ll) and a nucleophile X or Y to form 19 is called palladation. Depending on the nucleophile, it is called oxypalladation, aminopalladation, carbopalladation, etc. The subsequent elimination of b-hydrogen produces the nucleophilic substitution product 20. The displacement of Pd with another nucleophile (X) affords the nucleophilic addition product 21 (see Chapter 3, Section 2). As an example, the oxypalladation of 4-pentenol with PdXi to afford furan 22 or 23 is shown. 

Facile reaction of a carbon nucleophile with an olefinic bond of COD is the first example of carbon-carbon bond formation by means of Pd. COD forms a stable complex with PdCl2. When this complex 192 is treated with malonate or acetoacetate in ether under heterogeneous conditions at room temperature in the presence of Na2C03, a facile carbopalladation takes place to give the new complex 193, formed by the introduction of malonate to COD. The complex has TT-olefin and cr-Pd bonds. By the treatment of the new complex 193 with a base, the malonate carbanion attacks the cr-Pd—C bond, affording the bicy-clo[6.1,0]-nonane 194. The complex also reacts with another molecule of malonate which attacks the rr-olefin bond to give the bicyclo[3.3.0]octane 195 by a transannulation reaction[l2.191]. The formation of 194 involves the novel cyclopropanation reaction of alkenes by nucleophilic attack of two carbanions. 

As a unique reaction of Pd(II), the oxidative carbonylation of alkenes is possible with Pd(ll) salts. Oxidative carbonylation is mechanistically different from the hydrocarboxylation of alkenes catalyzed by Pd(0), which is treated in Chapter 4, Section 7.1. The oxidative carbonylation in alcohol can be understood in the following way. The reaction starts by the formation of the alkoxy-carbonylpalladium 218. Carbopalladation of alkene (alkene insertion) with 218 gives 219. Then elimination of /3-hydrogen of this intermediate 219 proceeds to... 

The transmetallation of various organometallic compounds (Hg, Tl, Sn, B, Si, etc.) with Pd(II) generates the reactive cr-aryl, alkenyl, and alkyl Pd compounds. These carbopalladation products can be used without isolation for further reactions. Pd(II) and Hg(II) salts have similar reactivity toward alkenes and aromatic compounds, but Hg(II) salts form stable mercuration products with alkenes and aromatic rings. The mercuration products are isolated and handled easily. On the other hand, the corresponding palladation products are too reactive to be isolated. The stable mercuration products can be used for various reactions based on facile transmetallation with Pd(II) salts to generate the very reactive palladation products 399 and 400 in rim[364,365]. 

The carbopalladation of allylamine with malonate affords the chelating complex 510, which undergoes insertion of methyl vinyl ketone to form the amino enone 511[463]. The allylic sulfide 512 has the same chelating effect to give the five-membered complex 513 by carbopalladation[463.464]. 

The carbopalladation is extended to homoallylic amines and sulfides[466. Treatment of 4-dimethylamino-l-butene (518) with diethyl malonate and Li2PdCl4 in THF at room temperature leads to the oily carbopalladated complex 519, hydrogenation of which affords diethyl 4-(dimethylamino) butylmalonate (520) in an overall yield of 91%. Similarly, isopropyl 3-butenyl sulfide (521) is carbopalladated with methyl cyclopentanonecarboxylate and Li2PdCl4. Reduction of the complex affords the alkylated keto ester 522 in 96% yield. Thus functionalization of alkenes is possible by this method. 

Stereochemical features in the oxidative addition and the elimination of /3-hydrogen of cyclic and acyclic alkenes are different. The insertion (palladation) is syn addition. The syn addition (carbopalladation) of R—Pd—X to an acyclic alkene is followed by the syn elimination of 3-hydrogen to give the trans-a ksne 6, because free rotation of 5 is possible with the acyclic alkene. On the other hand, no rotation of the intermediate 7 is possible with a cyclic alkene and the syn elimination of /3-hydrogen gives the allylic compound 8 rather than a substituted alkene. 

In the alkylative cyclization of the 1,6-enyne 372 with vinyl bromide, formation of both the five-membered ring 373 by exn mode carbopalladation and isomerization of the double bonds and the six-membered ring 374 by endo mode carbopalladation are observed[269]. Their ratio depends on the catalytic species. Also, the cyclization of the 1,6-enyne 375 with /i-bromostyrene (376) affords the endo product 377. The exo mode cyclization is commonly observed in many cases, and there are two possible mechanistic explanations for that observed in these examples. One is direct endo mode carbopalladation. The other is the exo mode carbopalladation to give 378 followed by cyclopropana-tion to form 379, and the subsequent cyclopropylcarbinyl-homoallyl rearrangement affords the six-membered ring 380. Careful determination of the E or Z structure of the double bond in the cyclized product 380 is crucial for the mechanistic discussion. 

Intramolecular reaction can be used for polycyclization reaction[275]. In the so-called Pd-catalyzed cascade carbopalladation of the polyalkenyne 392, the first step is the oxidative addition to alkenyl iodide. Then the intramolecular alkyne insertion takes place twice, followed by the alkene insertion twice. The last step is the elimination of/3-hydrogen. In this way, the steroid skeleton 393 is constructed from the linear diynetriene 392(276]. 

The intramolecular carbopalladation (or insertion) of the triple bond in dimethyl 4-pentynylmalonate (215) with Pd—H species and malonate anion as shown by 216 proceeds in the presence of f-BuOK and 18-crown ether, affording the methylenecyclopentane derivatives 217 and 218, the amounts of which depend on the reaction conditions. The Pd—H species may be formed... 

The 2-alkylideneindanone 282 is formed by carbopalladation via ring expansion of the alkynylcyclobutenol 280 with palladium trifluoroacetate to yield an intermediate 281 and its protonolysis. 4-Oxygenated 5-alkylidenecyclopente-nones react similarly[139]. 

The mechanism of the PdCh-catalyzed Cope rearrangement has been studied by use of the partially deuterated 1.5-diene 53[46], The coordination of Pd(II) activates the alkene, and cyclization (carbopalladation) takes place to... 

Termination of cyclic carbopalladation of alkynes via caibonylative lactamization can be achieved more satisfactorily with alkenyl or aryl halides containing an oo-caiboxamido or co-sulfonamido group than with those containing an 0)-amino group. The method appears to be satisfactory for the preparation of certain piperidines (e.g., 102) <96T(52)11529>. 

Recently, Larock and coworkers used a domino Heck/Suzuki process for the synthesis of a multitude of tamoxifen analogues [48] (Scheme 6/1.20). In their approach, these authors used a three-component coupling reaction of readily available aryl iodides, internal alkynes and aryl boronic acids to give the expected tetrasubsti-tuted olefins in good yields. As an example, treatment of a mixture of phenyliodide, the alkyne 6/1-78 and phenylboronic acid with catalytic amounts of PdCl2(PhCN)2 gave 6/1-79 in 90% yield. In this process, substituted aryl iodides and heteroaromatic boronic acids may also be employed. It can be assumed that, after Pd°-cata-lyzed oxidative addition of the aryl iodide, a ds-carbopalladation of the internal alkyne takes place to form a vinylic palladium intermediate. This then reacts with the ate complex of the aryl boronic acid in a transmetalation, followed by a reductive elimination. 

Bicyclic lactones such as 6/1-101 were synthesized by Negishi and coworkers [57] using a domino Heck carbopalladation as the key step of vinyl halides as 6/1-99 to give 6/1-100. The product can be transformed into the desired lactone 6/1-101 in a few steps (Scheme 6/1.26). 

Tietze and coworkers [60] observed a combination of a Heck reaction and a C-H-activation by treatment of the alkyne 6/1-111 with Pd°. These authors aimed at compound 6/1-112, but 6/1-110 was obtained as a single product in high yield (Scheme 6/1.29). It can again be assumed that after oxidative addition a cis-carbopalladation of the triple bond takes place to give an alkenyl Pd intermediate which undergoes the C-H-insertion into the neighboring naphthalene and not into the aryl ether moiety. 

Holzapfel and coworkers [132] used the carbopalladation ofalkynes followed by a cyclization for the synthesis of tricyclic compounds as 6/1-280, derived from the sugar derivative 6/1-279 (Scheme 6/1.74). 

Because of their high reactivity and their low steric demand, alkynes are highly versatile partners. The resulting vinylmetal species are also important reactive entities. Accordingly, the intermolecular carbopalladation of alkynes has attracted the interest of organic chemists for years.42-45... 

Palladium-catalyzed cyclization of alkenes and alkynes were reported by Balme and co-workers.143 144 Intramolecular carbopalladation occurs to give polycyclic compounds. It has been shown that the nucleophile type has a large influence on the cyclization process. Both 5-exo- and 6-endo-cyclization are observed for substrates with nitrile (116 and 118) and ester (120, 122, and 124) substituents, respectively (Scheme 36). When a mixed nucleophile (CN and C02Me) is used, a mixture of 5-exo and 6-endo products is obtained. The chemoselectivity is controlled by the size of the nucleophile used. The stereochemistry of the initial double bond plays an important role on the stereoselectivity of the cyclization. (Z)-olefins (118 and 120) and (/. )-olefins (116 and 124) afford as- (119 and 121) and trans-cyclization products (117 and 123), respectively. 

Based on a /rarcr-acetoxypalladation of the triple bond, Lu has developed a highly enantioselective (up to 87% ee) synthesis of 7-butyrolactones with Pd(n) catalysis (Scheme 73).280 Following the initial /ra/w-acetoxy-palladation, a plausible mechanism for this sequence involves an intramolecular carbopalladation of the pendant olefin, and deacetoxypalladation instead of the common /3-hydride elimination in the final step. 

Insertion of palladium into the Si-Sn bond generates intermediate 428 that undergoes m-addition on the triple bond (Scheme 108). The resulting vinylpalladium 429 ensures the carbopalladation of the second triple bond followed by reductive elimination with retention of stereochemistry.376... 

---