Carbonyl groups/compounds additions

An antioxidant ties up the peroxy radicals so that they are incapable of propagating the reaction chain or to decompose the hydroperoxides in such a manner that carbonyl groups and additional free radicals are not formed. The former, which are called chain-breaking antioxidants, free-radical scavengers, or inhibitors. are usually hindered phenols or amines. The latter, called peroxide decomposers, are generally sulfur compounds or... 

Claisen condensations usually give 1,3-dicarbonyl products, with one I saturated carbon between two carbonyl groups. Michael additions commonly give 1,5-dicarbonyl products, with three saturated I carbons between two carbonyl I groups. When you need a compound with three carbons between two carbonyl groups,... 

As mentioned above, the photooxidation was discovered by exposure of compound 22 to sunlight. The reaction proved to be of great value for angucycline synthesis because the -hydroxy group present in most natural products which is easily eliminated under basic or acidic conditions (see Scheme 2) and the carbonyl group at C-1 can thus be introduced under mild neutral conditions. We assume that the reaction is initiated by Norrish type II y-hydrogen abstraction of the excited carbonyl in 25 to yield a diradical 26 as shown in Scheme 8 with 1-deoxyrabelomycin (25) as the example [39]. The H-abstraction requires a very definite steric environment in which the benzylic protons have to be in proximity of the excited carbonyl group. Subsequent addition of the diradical 26 with... 

Problem 3.14 a. This is another example of the reaction of an amine with a carbonyl compound in the presence of an acid catalyst. The first steps are protonation of the carbonyl group, nucleophilic addition of the amine, and deprotonation of the nitrogen to give intermediate 3-49. 

Thiazolidines (494) are produced by addition of boron trifluoride-activated ketone enolates (493) to trialkylthiazolines (492) (Scheme 103). Compounds (494) contain a carbonyl group in addition to the masked thiol group, and thus acid treatment of crude (494) directly leads to thiophenes (495) via an intramolecular condensation <83TL4507>. The method is versatile and thiophenes such as (496)-(498) were prepared in good yields. 

This reaction was first reported by Nenitzescu in 1929. It is the synthesis of a 5-hydroxyindoie derivative involving the condensation between a 1,4-benzoquinone and a /3-amino-a ,/3-unsaturated compound and subsequent cyclization. Therefore, this reaction is generally known as the Nenitzescu indole synthesis, Nenitzescu reaction, j or Nenitzescu synthesis.Occasionally, it is also referred to as the Nenitzescu cyclization, Nenitzescu condensation, s.2i qj. Nenitzescu process. It should be pointed out that the synthesized indole derivatives by this reaction are restricted to those with an electron-withdrawing group at position 3, such as an ester or a carbonyl group. In addition, the completion of this reaction requires an appropriate oxidizing agent to convert the initial adduct into the indole derivative. i From monosubstituted quinone, 4-, 6- and 7-substituted 5-hydroxyindole derivatives all are possible products, but 6-substituted isomer is the one normally obtained. ... 

The reaction that prevails when the reaction is under kinetic control is the one that is faster. Therefore, the product depends on the reactivity of the carbonyl group. Compounds with reactive carbonyl groups form primarily direct addition products because for those compounds, direct addition is faster. Compounds with less reactive carbonyl groups form conjugate addition products because for those compounds, conjugate addition is faster. 

The main use of organocadmium compounds is for the preparation of ketones and keto-esters, and their special merit lies in the fact that they react vigorously with acid chlorides of all types but add sluggishly or not at all to multiple bonds (compare addition of Grignard reagents to carbonyl groups). Some t3rpical syntheses are ... 

The most general methods for the syntheses of 1,2-difunctional molecules are based on the oxidation of carbon-carbon multiple bonds (p. 117) and the opening of oxiranes by hetero atoms (p. 123fl.). There exist, however, also a few useful reactions in which an a - and a d -synthon or two r -synthons are combined. The classical polar reaction is the addition of cyanide anion to carbonyl groups, which leads to a-hydroxynitriles (cyanohydrins). It is used, for example, in Strecker s synthesis of amino acids and in the homologization of monosaccharides. The ff-hydroxy group of a nitrile can be easily substituted by various nucleophiles, the nitrile can be solvolyzed or reduced. Therefore a large variety of terminal difunctional molecules with one additional carbon atom can be made. Equally versatile are a-methylsulfinyl ketones (H.G. Hauthal, 1971 T. Durst, 1979 O. DeLucchi, 1991), which are available from acid chlorides or esters and the dimsyl anion. Carbanions of these compounds can also be used for the synthesis of 1,4-dicarbonyl compounds (p. 65f.). 

The selective intermolecular addition of two different ketones or aldehydes can sometimes be achieved without protection of the enol, because different carbonyl compounds behave differently. For example, attempts to condense acetaldehyde with benzophenone fail. Only self-condensation of acetaldehyde is observed, because the carbonyl group of benzophenone is not sufficiently electrophilic. With acetone instead of benzophenone only fi-hydroxyketones are formed in good yield, if the aldehyde is slowly added to the basic ketone solution. Aldols are not produced. This result can be generalized in the following way aldehydes have more reactive carbonyl groups than ketones, but enolates from ketones have a more nucleophilic carbon atom than enolates from aldehydes (G. Wittig, 1968). 

The synthesis of spiro compounds from ketones and methoxyethynyl propenyl ketone exemplifies some regioselectivities of the Michael addition. The electrophilic triple bond is attacked first, next comes the 1-propenyl group. The conjugated keto group is usually least reactive. The ethynyl starting material has been obtained from the addition of the methoxyethynyl anion to the carbonyl group of crotonaldehyde (G. Stork, 1962 B, 1964A). 

Synthetically useful stereoselective reductions have been possible with cyclic carbonyl compounds of rigid conformation. Reduction of substituted cyclohexanone and cyclopentan-one rings by hydrides of moderate activity, e.g. NaBH (J.-L. Luche, 1978), leads to alcohols via hydride addition to the less hindered side of the carbonyl group. Hydrides with bulky substituents 3IQ especially useful for such regio- and stereoselective reductions, e.g. lithium hydrotri-t-butoxyaluminate (C.H. Kuo, 1968) and lithium or potassium tri-sec-butylhydro-borates or hydrotri-sec-isoamylborates (=L-, K-, LS- and KS-Selectrides ) (H.C. Brown, 1972 B C.A. Brown, 1973 S. Krishnamurthy, 1976). 

Although the present chapter includes the usual collection of topics designed to acquaint us with a particular class of compounds its central theme is a fundamental reaction type nucleophilic addition to carbonyl groups The principles of nucleophilic addition to aide hydes and ketones developed here will be seen to have broad applicability m later chap ters when transformations of various derivatives of carboxylic acids are discussed... 

A number of compounds of the general type H2NZ react with aldehydes and ketones m a manner analogous to that of primary amines The carbonyl group (C=0) IS converted to C=NZ and a molecule of water is formed Table 17 4 presents exam pies of some of these reactions The mechanism by which each proceeds is similar to the nucleophilic addition-elimination mechanism described for the reaction of primary amines with aldehydes and ketones... 

Aldol Addition and Related Reactions. Procedures that involve the formation and subsequent reaction of anions derived from active methylene compounds constitute a very important and synthetically useful class of organic reactions. Perhaps the most common are those reactions in which the anion, usually called an enolate, is formed by removal of a proton from the carbon atom alpha to the carbonyl group. Addition of this enolate to another carbonyl of an aldehyde or ketone, followed by protonation, constitutes aldol addition, for example... 

Endo adducts are usually favored by iateractions between the double bonds of the diene and the carbonyl groups of the dienophile. As was mentioned ia the section on alkylation, the reaction of pyrrole compounds and maleic anhydride results ia a substitution at the 2-position of the pyrrole ring (34,44). Thiophene [110-02-1] forms a cycloaddition adduct with maleic anhydride but only under severe pressures and around 100°C (45). Addition of electron-withdrawiag substituents about the double bond of maleic anhydride increases rates of cycloaddition. Both a-(carbomethoxy)maleic anhydride [69327-00-0] and a-(phenylsulfonyl) maleic anhydride [120789-76-6] react with 1,3-dienes, styrenes, and vinyl ethers much faster than tetracyanoethylene [670-54-2] (46). 

A cyanohydrin is an organic compound that contains both a cyanide and a hydroxy group on an aUphatic section of the molecule. Cyanohydrias are usually a-hydroxy nitriles which are the products of base-cataly2ed addition of hydrogen cyanide to the carbonyl group of aldehydes and ketones. The lUPAC name for cyanohydrias is based on the a-hydroxy nitrile name. Common names of cyanohydrias are derived from the aldehyde or ketoae from which they are formed (Table 1). 

AH ahphatic aldehydes and most ketones react to form cyanohydrins. The lower reactivity of ketones, relative to aldehydes, is attributed to a combination of electron-donating effects and increased steric hindrance of the second alkyl group in the ketones. The magnitude of the equiUbrium constants for the addition of hydrogen cyanide to a carbonyl group is a measure of the stabiUty of the cyanohydrin relative to the carbonyl compound plus hydrogen cyanide ... 

The reaction involves nucleophilic substitution of for OR and addition of R MgX to the carbonyl group. With 1,4-dimagnesium compounds, esters are converted to cyclopentanols (40). Lactones react with Grignard reagents and give diols as products. 

---