Butylene polymer properties

Molecular weight is an important polymer property and is regulated by the addition of small amounts of hydrocarbons called modifiers to the reaction medium. Propylene, butylene, or hexane is used for this purpose. These combine with a growing chain through a chain transfer reaction ... 

Automotive appHcations account for about 116,000 t of woddwide consumption aimuaHy, with appHcations for various components including headlamp assembHes, interior instmment panels, bumpers, etc. Many automotive appHcations use blends of polycarbonate with acrylonitrile—butadiene—styrene (ABS) or with poly(butylene terephthalate) (PBT) (see Acrylonitrile polymers). Both large and smaH appHances also account for large markets for polycarbonate. Consumption is about 54,000 t aimuaHy. Polycarbonate is attractive to use in light appHances, including houseware items and power tools, because of its heat resistance and good electrical properties, combined with superior impact resistance. 

Being irregular in structure the polymer is amorphous and gives products of high clarity. In spite of the presence of the heterocyclic ring the deflection temperature under load is as low as that of the poly(butylene terephthalates) and is also slightly softer. Some typical properties are given in Table 25.9. 

The most important olefins used for the production of petrochemicals are ethylene, propylene, the butylenes, and isoprene. These olefins are usually coproduced with ethylene by steam cracking ethane, LPG, liquid petroleum fractions, and residues. Olefins are characterized by their higher reactivities compared to paraffinic hydrocarbons. They can easily react with inexpensive reagents such as water, oxygen, hydrochloric acid, and chlorine to form valuable chemicals. Olefins can even add to themselves to produce important polymers such as polyethylene and polypropylene. Ethylene is the most important olefin for producing petrochemicals, and therefore, many sources have been sought for its production. The following discusses briefly, the properties of these olefmic intermediates. 

Walch E. and Caymans R.J., Synthesis and properties of poly(butylenes terephthalate)-b-polyisobutylene segmented block copolymers, Polymer, 35, 636, 1994. 

Deschamps AA, Grijpma DW, and Feijen J. Poly(ethylene oxide)/poly(butylenes terephthalate) segmented block copolymers The effect of copolymer composition on physical properties and degradation behavior. Polymer, 2001, 42, 9335-9345. 

Saturated complex polyesters, particularly, poly (butylene terephthalate) (PBT) are used as engineering thermoplastics possesing good thermo - and wearstability, excellent moulding. These properties also allow to use them as matrix material for polymer composites [1], One of the perspective ways of search of effective catalysts for such systems is kinetic study of the reesterification model reaction, performed in the presence of various catalysts and comparison it with the results of the similar reaction without catalyst. Clarification on the example of model system of the most effective catalysts list allows to use them for obtaining both filled and nonfilled PBT and compare catalytic activity of various catalysts. The purpose of the... 

The above-mentioned results of the SSP of PET can be generally applied to other semicrystalline polyesters, such as poly(butylene terephthalate) (PBT), poly(tri-methylene terephthalate) PTT), polyethylene naphthalate) (PEN) or any other kind of semicrystalline co-polyester, as a result of their similar reaction behaviors. Most of the studies have been focused on PET and PBT due to their industrial importance. Meanwhile, the popularity of PEN is growing on account of the outstanding properties of this particular polymer. 

It should be taken into account that all of the aspects described above are of a general nature and therefore more or less valid for any kind of industrially relevant polyester resin. Upon closer examination, the experiences gained with PET are particularly applicable to poly(butylene terephthalate) (PBT), poly(trimethylene terephthalate) (PTT) and polyethylene naphthalate) (PEN). These polymers have gained major industrial importance as a result of a number of different properties in comparison with PET. 

A specific requirement of solid propellant binder polymers is the small tolerance allowed in the reproducibility of the product properties. As a result, some polymers that cannot be specified easily must be adjusted lot by lot in accordance with qualification tests. This is illustrated graphically by the data of Figure 1, where different lots of a carboxy-terminated polybutadiene procured to the same specification are compared with the different equivalents of the BITA (butylene imine adduct of trimesic... 

Poly(trimethylene terephthalate). Poly(trimethylene terephthal-ate) (PIT) is a crystalline polymer that is used for fibers, films, and engineering plastics. The polymer has an outstanding tensile elastic recovery, good chemical resistance, a relative low melting temperature, and a rapid crystallization rate. It combines some of the advantages of poly(ethylene terephthalate) (PET) and poly(butylene terephthalate) (PBT). Disadvantageous are the low heat distortion temperature, low melt viscosity, poor optical properties, and pronounced brittleness low temperatures. 

The superior properties of polypropylene terephthalate) (PPT) polymer and fibers over the chemically analogous poly(ethylene terephthalate) (PET, used for soda bottles) and poly(butylene terephthalate) (PBT) have been well known for several decades PPT fibers are much more elastic and less brittle than PET and offer better recovery from stretching than PBT they are also easier to dye than either PET or PBT. Compared to the intermediate for PET, ethylene glycol, which is available inexpensively from ethylene oxide, and to that for PBT, butanediol, likewise available inexpensively from butene or butadiene, the intermediate for PPT, 1,3 propanediol (1,3-PPD or PDO), was not - and on a large scale is still not - available. Three processes, two chemical ones and one biotechnological, compete to change this situation (Figure 20.10). 

Sulfonation is very useful chemical modification of polymer, as it induces high polarity in the polymer changing its chemical as well as physical properties. Sulfonated polymers are also important precursors for ionomer formation [75]. There are reports of sulfonation of ethylene-propylene diene terpolymer (EPDM) [76, 77], polyarylene-ether-sulfone [78], polyaromatic ether ketone [79], polyether ether ketone (PEEK) [80], styrene-ethylene-butylene-styrene block copolymer, (SEBS) [81]. Poly [bis(3-methyl phenoxy) phosphozene] [82], Sulfonated polymers show a distinct peak at 1176 cm"1 due to stretching vibration of 0=S=0 in the -S03H group. Another peak appears at 881 cm 1 due to stretching vibration of S-OH bond. However, the position of different vibrational bands due to sulfonation depends on the nature of the cations as well as types of solvents [75, 76]. 

The decorative laminates described in the previous chapter are made with selected thermosetting resins while resins of this type can be moulded and extruded by methods similar to those outlined in the present and the next chapter the materials employed for these processes predominantly are thermoplastic. Many such plastics can be moulded and extruded under suitable conditions, the most important in terms of quantities used being those that combine properties satisfactory for the purpose with convenience in pro-cessing-especially the polyolefins (polyethylene and polypropylene), poly(vinyl chloride), and styrene polymers and blends. Other plastics with special qualities, such as better resistance to chemical attack, heat, impact, and wear, also are used—including acetals (polyformaldehyde or polyoxymethylene), polyamides, polycarbonates, thermoplastic polyesters like poly(ethylene terephtha-late) and poly(butylene terephthalate), and modified poly(phenylene oxide),... 

Polyester is a general term referring to any polymer where the monomers are linked by ester bonds and includes the biodegradable microbially derived polyhydroxyalkanoates, which, as they are naturally produced, are beyond the scope of this article (for a review see Kim Rhee, 2003). Most synthetic polyesters in large-scale use are the aromatic poly(ethylene tetraphthalate) or poly(butylene tetraphthalate) polyesters as they have excellent material properties and are used in a wide range of applications including plastic containers, fibres for synthetic fabrics, films... 

---