Borohydride, sodium reaction with anhydrides

One-pot conversions of 2-hydroxy(acylbenzenes) with anhydrides or acid chlorides to produce coumarins [52-54] and flavones [54-58] under mild liquiddiquid or solidtliquid two-phase conditions via a Baker-Venkataraman type reaction (Scheme 6.19) are catalysed by quaternary ammonium salts. 3-Substituted coumarins are produced from salicylaldehyde and malonodinitrile, or substituted acetonitriles, in high yield (>85%) in a one-pot catalysed sequential aldol-type reaction and cycliza-tion in the absence of an added organic solvent [59]. When 2 -hydroxychalcones are reduced under catalytic two-phase conditions with sodium borohydride, 2,4-cis-flavan-4-ols are produced [60] (see Section 11.3). 

Miki and Hachiken reported a total synthesis of murrayaquinone A (107) using 4-benzyl-l-ferf-butyldimethylsiloxy-4fT-furo[3,4-f>]indole (854) as an indolo-2,3-quinodimethane equivalent for the Diels-Alder reaction with methyl acrylate (624). 4-Benzyl-3,4-dihydro-lfT-furo[3,4-f>]indol-l-one (853), the precursor for the 4H-furo[3,4-f>]indole (854), was prepared in five steps and 30% overall yield starting from dimethyl indole-2,3-dicarboxylate (851). Alkaline hydrolysis of 851 followed by N-benzylation of the dicarboxylic acid with benzyl bromide and sodium hydride in DMF, and treatment of the corresponding l-benzylindole-2,3-dicarboxylic acid with trifluoroacetic anhydride (TFAA) gave the anhydride 852. Reduction of 852 with sodium borohydride, followed by lactonization of the intermediate 2-hydroxy-methylindole-3-carboxylic acid with l-methyl-2-chloropyridinium iodide, led to the lactone 853. The lactone 853 was transformed to 4-benzyl-l-ferf-butyldimethylsiloxy-4H-furo[3,4- 7]indole 854 by a base-induced silylation. Without isolation, the... 

Two years later, the same group reported a formal synthesis of ellipticine (228) using 6-benzyl-6H-pyrido[4,3-f>]carbazole-5,ll-quinone (6-benzylellipticine quinone) (1241) as intermediate (716). The optimized conditions, reaction of 1.2 equivalents of 3-bromo-4-lithiopyridine (1238) with M-benzylindole-2,3-dicarboxylic anhydride (852) at —96°C, led regioselectively to the 2-acylindole-3-carboxylic acid 1233 in 42% yield. Compound 1233 was converted to the corresponding amide 1239 by treatment with oxalyl chloride, followed by diethylamine. The ketone 1239 was reduced to the corresponding alcohol 1240 by reaction with sodium borohydride. Reaction of the alcohol 1240 with f-butyllithium led to the desired 6-benzylellipticine quinone (1241), along with a debrominated alcohol 1242, in 40% and 19% yield, respectively. 6-Benzylellipticine quinone (1241) was transformed to 6-benzylellipticine (1243) in 38% yield by treatment with methyllithium, then hydroiodic acid, followed... 

Beccalli et al. reported a new synthesis of staurosporinone (293) from 3-cyano-3-(lH-indol-3-yl)-2-oxo propionic acid ethyl ester (1464) (790). The reaction of 1464 with ethyl chlorocarbonate and triethylamine afforded the compound 1465, which, on treatment with dimethylamine, led to the corresponding hydroxy derivative 1466. The triflate 1467 was prepared from 1466 by reaction with trifluoromethanesulfonic anhydride (Tf20) in the presence of ethyldiisopropylamine. The palladium(O)-catalyzed cross-coupling of the triflate 1467 with the 3-(tributylstannyl)indole 1468 afforded the vinylindole 1469 in 89% yield. Deprotection of both nitrogen atoms with sodium ethoxide in ethanol to 1470, followed by photocyclization in the presence of iodine as the oxidizing agent provided the indolocarbazole 1471. Finally, reductive cyclization of 1471 with sodium borohydride-cobaltous chloride led to staurosporinone (293) in 40% yield (790) (Scheme 5.248). 

In analogy to 23, the chiralities of [2.2]meta- and [10]paracyclophanecarboxylic acids were also deduced from the results of kinetic resolutions 40-77>. For the application of Horeau s method, (—)-[10]paracyclophanecarboxylic acid (14) was transformed by stereoselective hydrogenation and subsequent sodium borohydride reduction of an intermediate cyclohexanone into the (—)-cis-cyclohexanol 94 which on reaction with racemic 2-phenylbutanoic anhydride afforded a 15% excess of the Ievorotatory acid thereby proving (in agreement with the kinetic resolution of the anhydride of 14, vide supra) the chirality (5) for (—)-14 and all its derivatives 40). Optical comparison with dioxa[10]paracyclophanecarboxylic acid (16) confirmed this result63,108). 

The use of activated anthranihc acid derivatives facUitates the preparation of the amides in those cases where the amines are either umeactive or difficult to obtain. Thus, reaction of (87-1) with phosgene gives the reactive the isatoic anhydride (89-1). Condensation of that with ortho-toluidine leads to the acylation product (89-2) formed with a simultaneous loss of carbon dioxide. This is then converted to the quinazolone (89-3) by heating with acetic anhydride. Reaction with sodium borohydride in the presence of aluminum chloride selectively reduces the double bond to yield the diuretic agent metolazone (89-4) [99]. 

Dihydrothieno[2,3-6][l,5]benzothiazepines (42) were synthesized from 2-(2-thienylthio)aniline (40). Compound 40 was acylated by treatment with acetic anhydride or benzoyl chloride to give N-acyl derivatives (41), which afforded compounds 42 by cyclization with phosphorus oxychloride and subsequent reduction with sodium borohydride or Zn/HCl. N-Dimethylaminopropyl derivatives 43 were prepared by reaction with di-methylaminopropyl chloride in the presence of sodium amide (Scheme 13) (67CZP124935 68CCC1846). 

Given the structure of a sugar, write equations for its reaction with each of the following reagents acetic anhydride, bromine water, nitric acid, sodium borohydride, and Tollens or Fehling s reagent. 

Another route to 5-amino-5-deoxy-L-idose proceeds from 5-(benzyl-amino)-5-deoxy-l,2-0-isopropylidene-R-L-idurononitrile (56), which is readily obtainable from 1,2-O-isopropylidene-a-D-xj/lo-pentodialdo-1,4-furanose (13) by reaction with benzylamine and hydrogen cy-anide. Partial hydrogenation of the nitrile 56 by the Kuhn procedure, in acid solution, leads to the hexodialdose (57), which is reduced with sodium borohydride to 5-amino-5-deoxy-l,2-0-isopro-pylidene-jS-L-idofuranose. From this compound, tbe acyclic bisulfite adduct (58) is obtained by reaction with sulfiirous acid. Treatment of 58 with barium hydroxide gives crystalline 5-amino-l,6-anhydro-5-deoxy-jS-L-idopyranose (60) in almost quantitative yield. The equilibrium between the pyranose form (61) and its 1,6-anhydride (60) lies far on the side of Ae bicyclic form (60). The equilibrium can be evaluated from the optical rotation of the solution obtained by treat-... 

Reaction with acetic anhydride/pyridine yielded the monoacetate (CX), confirming the presence of only one secondary hydroxyl group in browniine. Permanganate oxidation of CX produced the lactam CXI which when hydrolyzed yielded oxobrowniine (CXII). Reduction of dehydrooxobrowniine with sodium borohydride gave predominantly... 

Diazene 19 was synthesized in the manner portrayed below. Thus, treatment of anhydride 20 with sodium borohydride selectively reduces one carbonyl to a methylene unit. Reduction of the resulting lactone with DIBAL followed by a Wittig reaction and oxidation with PCC afforded aldehyde 22. When treated with cyclopentadiene in the presence of diethylamine in methanol, 22 undergoes a smooth and efficient conversion to fulvene 23. Diels-Alder cycloaddition to the azodicarboxylate 24 proceeded rapidly, a characteristic of reactions with this electron deficient chlorinated dienophile [8]. Selective reduction of the endocyclic n bond using diimide generated in situ, followed by the electrochemical reductive cleavage of the biscarbamate led to diazene 19 [6]. 

Reaction with triethyloxonium tetrafluoroborat generated an iminium ester that was reduced with sodium borohydride to give ethyl 4-(N,N-diethylamino)butanoate (2.38) in 83% overall yield. Using maleic anhydride leads to an alkenyl amino acid as a product. Reaction with ammonia gave 3Z-aminoprop-2-enoic acid (2.39, also known as maleamic acid).21... 

Chemical properties of the batrachotoxin fraction were assessed on a microscale. In retrospect it appears that most reactions resulted in loss of the pyrrole entity and hence a product which did not afford a positive Ehrlich reaction. These chemical reactions included catalytic hydrogenation with palladium on charcoal, reduction with lithium aluminium hydride, treatment with acidic methanol, oxidation with manganese dioxide, treatment with acid, reaction with 2,4-dinitrophenylhydrazine, and exhaustive methylation with methyl iodide. An Ehrlich-positive methiodide could be obtained under milder conditions with methyl iodide. Acetylation of the batrachotoxin fraction with acetic anhydride and pyridine afforded two Ehrlich-positive 0-acetyl derivatives. Reaction with methoxyamine afforded an Ehrlich-positive 0-methyloxime. Reduction with sodium borohydride afforded an Ehrlich-positive dihydro-derivative. This product apparently isomerizes to other dihydro-compounds (257). Autoxidation, a serious problem during isolation of batrachotoxin, led to Ehrlich-negative products. 

Nitromethylation of aldehydes has been carried out in a one pot procedure consisting of the Henry reaction, acetylation, and reduction with sodium borohydride, which provides a good method for the preparation of l-nitroalkanes.16b 79 It has been improved by several modifications. The initial condensation reaction is accelerated by use of KF and 18-crown-6 in isopropanol. Acetylation is effected with acetic anhydride at 25 °C and 4-dimethylaminopyridine (DMAP) as a catalyst. These mild conditions are compatible with various functional groups which are often... 

Heat 3-nitrophthalic anhydride with ammonium carbonate to get 3-nitrophthalimide (I). Dissolve 4.3 g (I) in 50 ml 90% methanol and add 1.9 g sodium borohydride over 30 minutes while stirring vigorously at room temperature. Stir 2 hours, acidify with 20% HCI, evaporate in vacuum and treat the dry residue with acetone. Evaporate in vacuum to get 3.9 g (88%) 3-OH-4-nitrophthal-imidine (II) (recrystallize from acetone). Dissolve 3.9 g (II) in 40 ml 20% HCI and stir for 10 hours on water bath at 80-90°. Distill off HCI and stir residue with acetone. Filter and evaporate in vacuum to get 3.4 g 3-OH-4-nitrophthalide (III) (recrystallize from CHC 3 and can purify on column). Prepare an ether solution of CH2N2 and add to 1.93 g (III) in a 100 ml flask until a reaction is no longer evident. Add acetic acid to decompose excess diazomethane and evaporate in vacuum to get about 2 g of 2-methoxycarbonyl-6-nitrostyrene oxide (IV) (can purify on column). Dissolve 560 mg (IV) in 50 ml absolute methanol, add 50 mg Pt02 and hydrogenate as described elsewhere here (other reducing methods should work). Filter,... 

Addition of lithiated heterocycles to aldonolactones yields carbon-linked nucleosides (56). Thus, the reaction of 2,3 5,6-di-O-isopropylidene-L-gu-lono-1,4-lactone (9b) or 2,3-O-isopropylidene-D-ribono-l,4-lactone (16a) with various lithiated heterocycles gave gulofuranosyl derivatives 53a-g or ribofuranosyl derivatives 54b,c. Gulonolactols 53a-g and ribonolactols 54b,c were acetylated with acetic anhydride in pyridine to yield their acetyl derivatives. The stereochemistry of compounds 53a-g and 54b,c was discussed in terms of the Cotton effect of circular-dichroism curves of the ring-opened alcohols formed upon reduction by sodium borohydride. The configuration at C-l of 53g was proved by means of X-ray analysis (57,58). 

---