Borohydride lithium, reduction with

Reduction to alcohols (Section 15 2) Aide hydes are reduced to primary alcohols and ketones are reduced to secondary alcohols by a variety of reducing agents Catalytic hydrogenation over a metal catalyst and reduction with sodium borohydride or lithium aluminum hydride are general methods... 

In certain cases this reduction (with lithium aluminum hydride) takes a different course, and olefins are formed. The effect is dependent on both the reagent concentration and the steric environment of the hydrazone. Dilute reagent and hindered hydrazone favor olefins borohydride gives the saturated hydrocarbon. The hydrogen picked up in olefin formation comes from solvent, and in full reduction one comes from hydride and the other from solvent. This was shown by deuteriation experiments with the hydrazone (150) ... 

Studies of reductions with metal hydndes have concentrated on improvements in selectivity or conditions Replacement of the usual lithium aluminum hydnde-ether combination with potassium borohydride-methanol results m high yields of alcohol from ester [76] and less hazard [77] (equation 62) Reduction of a... 

The reduction of the double bond of an enamine is normally carried out either by catalytic hydrogenation (MS) or by reduction with formic acid (see Section V.H) or sodium borohydride 146,147), both of which involve initial protonation to form the iminium ion followed by hydride addition. Lithium aluminum hydride reduces iminium salts (see Chapter 5), but it does not react with free enamines except when unusual enamines are involved 148). 

J -Dehydroquinolizidine reacts with the enantiomeric (—)- and (-l-)-menthyl chloroformates forming (—)- and (-l-)-menthoxycarbonyl- -dehydroquinolizidines. These can be reduced as such or in the form of their immonium salts with sodium borohydride to (—)- and (+)-l-menthoxy-carbonylquinolizidines, which give (+)- and (-)-lupinin, respectively, on reduction with lithium aluminum hydride (243). The optical yield of the asymmetric reduction is about 10%. 

The tosylhydrazone is prepared from the carbonyl compound and then reduced with lithium aluminium hydride, sodium borohydride or potassium borohydride. In this way D-glucose tosylhydrazone was converted into crystalline 1-deoxyglucitol by reduction with potassium borohydride... 

Facial selectivities in the nucleophilic addition of bicyclic ketones have recently been examined comprehensively [71, 72]. Mehta and his colleagues studied the facial selectivities of 2,3-exo,exo-disubstituted 7-norbomanones 14a and 14b [73-75]. In the reduction of 14a and 14b with sodium borohydride, lithium aluminum hydride. 

Shenlin Huang has implemented method C with 2,4-bis-OBoc-3-bromobenzyaldehyde 27 (Fig. 4.22) and 2-(trimethylsilyl)ethoxy]methyl-lithium 38 at —78 °C in THF.24 Surprisingly, lithium-halogen exchange does not happen and the intermediate benzyl alcohol undergoes reduction with sodium borohydride in the same pot to afford the desired bromophenol 39 in 68% yield. This material... 

Lithium aluminum hydride reduction of oxychelerythrine (232) gave 6-hydroxydihydrochelerythrine (235), recrystallization of which in methanol afforded 6-methoxydihydrochelerythrine (agoline) (236). Both compounds have been isolated from plants, but they are probably artifacts arising during isolation. On reduction with sodium borohydride or dehydration with 10% hydrochloric acid, 235 was converted to dihydrochelerythrine (203) or chelerythrine (205), respectively (130,131). 

The neutralization values were influenced by reduction with strong reducing agents, lithium aluminum hydride, sodium borohydride, and amalgamated zinc plus hydrochloric acid (35, 46). For the most part, the consumption of NajCOj and of NaOEt decreased in equivalent amounts. This is further confirmation of the assumption that lactones of the fluorescein type or of the lactol type are present. The reaction with sodium ethoxide was shown to be no true neutralization, that is, exchange of H+for Na+, at all, but an addition reaction w ith the formation of the sodium salt of a semi-acetal or ketal ... 

Reductions with hydrides and complex hydrides are usually carried out by mixing solutions. Only sodium borohydride and some others are sometimes added portionwise as solids. Since some of the complex hydrides such as lithium aluminum hydride are not always completely pure and soluble without residues, it is of advantage to place the solutions of the hydrides in the reaction flask and add the reactants or their solutions from separatory funnels or by means of hypodermic syringes. 

The double bond in indole and its homologs and derivatives is reduced easily and selectively by catalytic hydrogenation over platinum oxide in ethanol and fluoroboric acid [456], by sodium borohydride [457], by sodium cyanoborohydride [457], by borane [458,459], by sodium in ammonia [460], by lithium [461] and by zinc [462]. Reduction with sodium borohydride in acetic acid can result in alkylation on nitrogen giving JV-ethylindoline [457]. 

Reduction of quinoxalines was carried out by catalytic hydrogenation [491, 492,493,494], with sodium borohydride [490] or with lithium aluminum hydride [476] to different stages of saturation. 

Alkyl chlorides are with a few exceptions not reduced by mild catalytic hydrogenation over platinum [502], rhodium [40] and nickel [63], even in the presence of alkali. Metal hydrides and complex hydrides are used more successfully various lithium aluminum hydrides [506, 507], lithium copper hydrides [501], sodium borohydride [504, 505], and especially different tin hydrides (stannanes) [503,508,509,510] are the reagents of choice for selective replacement of halogen in the presence of other functional groups. In some cases the reduction is stereoselective. Both cis- and rrunj-9-chlorodecaIin, on reductions with triphenylstannane or dibutylstannane, gave predominantly trani-decalin [509]. 

Complex hydrides can be used for the selective reduction of the carbonyl group although some of them, especially lithium aluminum hydride, may reduce the a, -conjugated double bond as well. Crotonaldehyde was converted to crotyl alcohol by reduction with lithium aluminum hydride [55], magnesium aluminum hydride [577], lithium borohydride [750], sodium boro-hydride [751], sodium trimethoxyborohydride [99], diphenylstarmane [114] and 9-borabicyclo[3,3,l]nonane [764]. A dependable way to convert a, -un-saturated aldehydes to unsaturated alcohols is the Meerwein-Ponndorf reduction [765]. 

Further reduction of quinones - acquisition of four or more hydrogens per molecule - was achieved with lithium aluminum hydride which reduced, in yields lower than 10%, 2-methyl-1,4-naphthoquinone to 1,2,3,4-tetrahydro-l,4-dihydroxy-2-methylnaphthalene and to l,2,3,4-tetrahydro-4-hydroxy-l-keto-2-methylnaphthalene [931]. Lithium aluminum hydride [931], sodium borohydride, lithium trie thy Iborohydride and 9-borabicyclo[3.3.1Jnomine [100] converted anthraquinone to 9,10-dihydro-9,10-dihydroxyanthracene in respective yields of 67, 65, 77 and 79%. 

Other reagents used for reduction are boranes and complex borohydrides. Lithium borohydride whose reducing power lies between that of lithium aluminum hydride and that of sodium borohydride reacts with esters sluggishly and requires refluxing for several hours in ether or tetrahydrofuran (in which it is more soluble) [750]. The reduction of esters with lithium borohydride is strongly catalyzed by boranes such as B-methoxy-9-bora-bicyclo[3.3.1]nonane and some other complex lithium borohydrides such as lithium triethylborohydride and lithium 9-borabicyclo[3.3.1]nonane. Addition of 10mol% of such hydrides shortens the time necessary for complete reduction of esters in ether or tetrahydrofuran from 8 hours to 0.5-1 hour [1060],... 

More reliable therefore is reduction with lithium aluminum hydride, lithium borohydride or calcium borohydride, which do not hydrogenolyze hydroxy groups [92]. 

Usually alcohols accompany aldehydes in reductions with lithium aluminum hydride [1104] or sodium bis 2-methoxyethoxy)aluminum hydride [544], or in hydrogenolytic cleavage of trifluoroacetylated amines [7772]. Thus terr-butyl ester of. -(. -trifluoroacetylprolyl)leucine was cleaved on treatment with sodium borohydride in ethanol to rerr-butyl ester of A7-prolylleucine (92% yield) and trifluoroethanol [7772]. During catalytic hydrogenations over copper chromite, alcohols sometimes accompany amines that are the main products [7775]. 

In the reductions with borohydrides and boranes the isolation of products differs from that used in the reductions with lithium aluminum hydride, the... 

Thioamides were converted to aldehydes by cautious desulfurization with Raney nickel [1137, 1138] or by treatment with iron and acetic acid [172]. More intensive desulfurization with Raney nickel [1139], electroreduction [172], and reduction with lithium aluminum hydride [1138], with sodium borohydride [1140] or with sodium cyanoborohydride [1140] gave amines in good to excellent yields. 

The CD fragment 1s synthesized starting with resolved bicyclic acid 129. Sequential catalytic hydrogenation and reduction with sodium borohydride leads to the reduced hydroxy acid 1. The carboxylic acid function is then converted to the methyl ketone by treatment with methyl-lithium and the alcohol is converted to the mesylate. Elimination of the latter group with base leads to the conjugated olefin 133. Catalytic reduction followed by equilibration of the ketone in base leads to the saturated methyl ketone 134. Treatment of that intermediate with peracid leads to scission of the ketone by Bayer Villiger reaction to afford acetate 135. The t-butyl protecting... 

---