Block copolymer, segmented polyurethanes

Step-Growth Gopolymerization. A sample of a block copolymer prepared by condensation polymerisation is shown in equation 30 (37). In this process, a prepolymer diol (HO—Z—OH) is capped with isocyanate end groups and chain extended with a low molecular-weight diol (HO—E—OH) to give a so-called segmented block copolymer, containing polyurethane hard blocks and O—Z—O soft blocks. 

Improved polyurethane can he produced hy copolymerization. Block copolymers of polyurethanes connected with segments of isobutylenes exhibit high-temperature properties, hydrolytic stability, and barrier characteristics. The hard segments of polyurethane block polymers consist of 4RNHCOO)-n, where R usually contains an aromatic moiety. 

Heterogenic surface Microdomain concept Block-type copolymer Graft-type copolymer Segmented polyurethane 1 ap i proa< i zh i Biochemical approach ... 

At present there are five types of thermoplastic rubber (TPR). Three of these, the polyurethane, the styrenic and the polyester are termed segmented block copolymers in that they consist of thermoplastic molecules grafted to the rubbery molecules. At room temperature it is the thermoplastic molecules which clump together to anchor the rubbery molecules. When heat is applied the thermoplastic molecules are capable of movement so that the material may be shaped using conventional thermoplastic moulding equipment. 

Miller J.A., Lin S.B., Hwang K.K.S., Wu K.S., Gibson P.E., and Cooper S.L. Properties of polyether-polyurethane block copolymers Effect of hard segment length distribution. Macromolecules, 18, 32, 1985. 

The materials selected for evaluation included three materials currently being used in these applications Biomer (Thoratec Laboratories Corporation, Emeryville, CA), representative of segmented ether-type polyurethanes Avcothane-51 (Avco Everett Research Laboratory, Inc., Everett, MA), a block copolymer of 10% silicone rubber and 90% polyurethane and Hexsyn (Goodyear Tire and Rubber Company, Akron, OH), a sulfur vulcanized hydrocarbon rubber that is essentially a polyhexene. Also selected, because of their easy availability, were Pellethane (Upjohn Company, North Haven, CT), an ether-type of polyurethane capable of being extruded in sheet form, and a butyl rubber formulation, compounded and molded at the National Bureau of Standards. The material thickness varied, but the sheets were generally about 1 mm thick. 

These structures are well defined by conducting the polymerization in the presence of appropriate mono- and difunctional reagents. They are of considerable interest for the preparation of segmented block copolymers.24,25 For instance, the fluorinated macrodiols 21 have already been used to prepare an interesting new series of partially fluorinated segmented polyurethanes,26 and we are investigating other novel polymers that can be prepared from these intermediates. 

Polyurethane multiblock copolymers of the type described by Eqs. 2-197 and 2-198 constitute an important segment of the commercial polyurethane market. The annual global production is about 250 million pounds. These polyurethanes are referred to as thermoplastic polyurethanes (TPUs) (trade names Estane, Texin). They are among a broader group of elastomeric block copolymers referred to as thermoplastic elastomers (TPEs). Crosslinking is a requirement to obtain the resilience associated with a rubber. The presence of a crosslinked network prevents polymer chains from irreversibly slipping past one another on deformation and allows for rapid and complete recovery from deformation. 

In segmented polyurethanes as well as in many other block copolymers incompatible polymer segments are combined. This incompatibility of different CRUs means that block copolymers often form multiphase systems (see TEM-... 

As stated in Chapter 1, microdomain-structured surfaces are believed to play an important role in their interactions with cells, proteins, and other biological elements. In this Chapter, the author will discuss biomedical behavior of three types of microdomain-structured materials segmented polyurethanes, A-B-A block copolymers, and polyamine-graft copolymers. 

Although the intrachin energy contribution of the soft phase in polyurethanes is negative, the internal energy increases upon extension (Fig. 10). Moreover, the thermomechanical behaviour of the segmented block copolymers and a typical... 

Table 4.4 Carbon dioxide (A)/nitrogen (B) permselectivity characterization for polyimide, polyurethane and polyamide block-copolymers containing polyether segments.

Polyurethane-based FTPEs are produced by reacting fluorinated polyether diols with aromatic disocyanates. The resulting block copolymers contain fluorinated polyether soft segments.68 Another possible method of preparation of fluorinated TPE is dynamic vulcanization. Examples are a blend of a perfluoroplastic and a perfluoroelastomer containing curing sites or a combination of VDF-based fluo-roelastomers and thermoplastics, such as polyamides, polybutylene terephtalate, and polyphenylene sulhde.69 70... 

Polyurethane TPE are block copolymers consisting of alternating hard and soft segments, separated into two phases [54] due to thermodynamic incompatibility. 

---