Bismuth molybdate ammoxidation

Fig. 2. Mechanism of selective ammoxidation and oxidation of propylene over bismuth molybdate catalysts. (31).

Another industrially important reaction of propylene, related to the one above, is its partial oxidation in the presence of ammonia, resulting in acrylonitrile, H2C=CHCN. This ammoxidation reaction is also catalyzed by mixed metal oxide catalysts, such as bismuth-molybdate or iron antimonate, to which a large number of promoters is added (Fig. 9.19). Being strongly exothermic, ammoxidation is carried out in a fluidized-bed reactor to enable sufficient heat transfer and temperature control (400-500 °C). 

Bismuth iron molybdate, 27 207-209 X-ray diffraction, TlilW Bismuth molybdate, 27 184-187, 189, 191-194, 196, 199--204, 30 124-125 active site, 27 210-213 alumina supported, 27 203, 204 ammoxidation, 30 159 P phase, 27 201 catalyst... 

Three well known examples of processes employing fluidised-bed operations are the oxidations of naphthalene and xylene to phthalic anhydride using a supported V2O5 catalyst and ammoxidation of propylene utilising a mixed oxide composition containing bismuth molybdate. Typically, this latter reaction is executed by passing a mixture of ammonia, air and propylene to a fluidised bed operating at about 0.2 MPa pressure, 400—500°C and a few seconds contact time between gas and fluidised catalyst peirticles. 

Hur et al. (252,277,278) reported the use of alkali metal-doped MgO to catalyze the synthesis of acrylonitrile and propionitrile (278). Acrylonitrile is an important chemical, especially in the polymer industry it is generally synthesized by the ammoxidation of propene catalyzed by multicomponent bismuth molybdates (279). An alternative method of synthesis of acrylonitrile is the reaction between methanol and acetonitrile (Scheme 42). 

Light hydrocarbons consisting of oxygen or other heteroatoms are important intermediates in the chemical industry. Selective hydrocarbon oxidation of alkenes progressed dramatically with the discovery of bismuth molybdate mixed-metal-oxide catalysts because of their high selectivity and activity (>90%). These now form the basis of very important commercial multicomponent catalysts (which may contain mixed metal oxides) for the oxidation of propylene to acrolein and ammoxidation with ammonia to acrylonitrile and to propylene oxide. 

Ammoxidation of propylene Bismuth molybdates, uranyl antimonate... 

Among the oxide catalysts, bismuth molybdates that catalyse selective oxidation and ammoxidation of propylene to yield acrolein and acrylonitrile have received considerable attention (Grasselli Burrington, 1981) ... 

In spite of the accumulated mechanistic investigations, it still seems difficult to explain why multicomponent bismuth molybdate catalysts show much better performances in both the oxidation and the ammoxidation of propylene and isobutylene. The catalytic activity has been increased almost 100 times compared to the simple binary oxide catalysts to result in the lowering of the reaction temperatures 60 80°C. The selectivities to the partially oxidized products have been also improved remarkably, corresponding to the improvements of the catalyst composition and reaction conditions. The reaction mechanism shown in Figs. 1 and 2 have been partly examined on the multicomponent bismuth molybdate catalysts. However, there has been no evidence to suggest different mechanisms on the multicomponent bismuth molybdate catalysts. 

Catalytic oxidation of propylene to acrolein was first discovered by the Shell group in 1948 on Cu20 catalyst (/). Both oxidation and ammoxidation were industrialized by the epoch-making discovery of bismuth molybdate catalyst by SOHIO (2-4). The bismuth molybdate catalyst was first reported in the form of a heteropoly compound supported on Si02, Bi P,Mo,2052/Si02 having Keggin structure but it was not the sole active species for the reactions. Several kinds of binary oxides between molybdenum trioxide and bismuth oxide have been known, as shown in the phase... 

In the 1960s, a number of binary oxides, including molybdenum, tellurium, and antimony, were found to be active for the reactions and some of them were actually used in commercial reactors. Typical commercial catalysts are Fe-Sb-O by Nitto Chemical Ind. Co. (62 -64) and U-Sb-O by SOHIO (65-67), and the former is still industrially used for the ammoxidation of propylene after repeated improvements. Several investigations were reported for the iron-antimony (68-72) and antimony-uranium oxide catalysts (73-75), but more investigations were directed at the bismuth molybdate catalysts. The accumulated investigations for these simple binary oxide catalysts are summarized in the preceding reviews (5-8). 

Typical Reaction Conditions for the Oxidation and Ammoxidation of Propylene on the Simple and Multicomponent Bismuth Molybdate Catalyst°... 

Investigations into the scheelite-type catalyst gave much valuable information on the reaction mechanisms of the allylic oxidations of olefin and catalyst design. However, in spite of their high specific activity and selectivity, catalyst systems with scheelite structure have disappeared from the commercial plants for the oxidation and ammoxidation of propylene. This may be attributable to their moderate catalytic activity owing to lower specific surface area compared to the multicomponent bismuth molybdate catalyst having multiphase structure. 

Some progress has been made in explaining the splendid catalytic performance of multicomponent bismuth molybdates that are used widely for the industrial oxidations and ammoxidations of lower olefin. We have seen that the catalytic activity and selectivity are greatly enhanced by the multifunctionalization of the catalyst systems. Many functions newly introduced are... 

The oxidation of propene is at present the most extensively studied gas phase heterogeneous oxidation process. The selective production of acrolein over cuprous oxide has been known for a very long time. However, the discovery of bismuth molybdates as highly active and selective catalysts for the oxidation to acrolein, and particularly the ammoxidation to acrylonitrile, has opened a new era in oxidation catalysis. 

With regard to the selectivity of the ammoxidation, Sn—Sb—O catalysts are superior to bismuth molybdates. According to Germain and Perez... 

A commercial iron-promoted catalyst (Sn/Sb/Fe = 1/4/0.25) was studied by Germain et al. [92,93,135,137]. Iron is reported to improve the ammoxidation qualities of the catalyst although it has no effect on the oxidation [93], The kinetics, determined in a flow reactor at 445°C and with a feed ratio C3H6/NH3/air = 1/1.2/10, are essentially similar for this catalyst and bismuth molybdate. The initial selectivity is 80% and the maximum yield is 65% (at 445°C). The initial selectivity markedly depends on the temperature (e.g. 91% at 415°C and 72% at 507°C). The effect of water is hardly significant for this catalyst the acrylonitrile formation is slightly inhibited, while some more acrolein is formed. Presumably, water and ammonia compete in the interaction with the catalyst, which is much less reactive with respect to ammonia than bismuth molybdate. The acrolein ammoxidation is very rapid (about six times the propene ammoxidation rate) and selective (86%). A comparison of the Sn—Sb—Fe—O catalyst with bismuth molybdate is presented in Table 14. 

Wise [350] investigated the parallel between ammoxidation and oxidation of ammonia over bismuth molybdates. It was shown that the rate of conversion to nitrogen is first order in NH3 and independent of oxygen concentration, analogous to the selective oxidation of propene. Under conditions in which propene combusts, NH3 is converted to nitrogen oxides. 

Bismuth molybdate catalysts can also cause other allylic oxidations such as the conversion of 2-methylpropene to methacrolein and a-methylstyrene to atropaldehyde, and ammoxidations such as the conversion of 2-methylpropene to methacrylonitrile and a-methylstyrene to atroponitrile.309... 

In 1959, Idol (2), and in 1962, Callahan et al. (2) reported that bismuth/molybdenum catalysts produced acrolein from propylene in higher yields than that obtained in the cuprous oxide system. The authors also found that the bismuth/molybdenum catalysts produced butadiene from butene and, probably more importantly, observed that a mixture of propylene, ammonia, and air yielded acrylonitrile. The bismuth/molybdenum catalysts now more commonly known as bismuth molybdate catalysts were brought to commercial realization by the Standard Oil of Ohio Company (SOHIO), and the vapor-phase oxidation and ammoxidation processes which they developed are now utilized worldwide. 

Aykan (35) reported that ammoxidation of propylene occurred over a silica-supported bismuth molybdate catalyst in the absence of gas-phase oxygen, although the catalytic activity decreased rapidly with increasing catalyst reduction. The reduction process was followed by X-ray and it was found that phase changes which occurred in the catalyst and the decrease in catalytic activity corresponded quantitatively to the depletion of lattice oxygen. 

Silica supported bismuth molybdate catalysts were examined by Dalin et al. (85) during extended steady-state ammoxidation of propylene. X-Ray diffraction measurements indicated that a significant alteration in the phase composition of supported catalysts occurred during operation. The a and /3 phases of bismuth molybdate, which were originally present, transformed into the y phase of bismuth molybdate as described by the equation... 

Bismuth molybdates having a Bi/Mo ratio in the range of 0.67 2.0 catalyze the selective oxidation of propene to acrolein, and the ammoxidation of propene to acrylonitrile (equations 5 and 6). Both reactions proceed through an aUyhc intermediate. Three typical active phases o -Bi2Mo30i2,... 

Molybdate based scheelites have been intensively studied in this respect, one reason being that they are found with molybdenum in both the penta- and hexavalent state. Bismuth molybdates in particular are useful catalysts for selective oxidation of propylene to acrolein, propylene ammoxidation to acrylonitrile and the oxidative dehydrogenation of butene to butadiene. 

---