Biosensors types

Construction principles and the mechanism for biosensors derived from enzymes. Combined enzymatic and electrochemical reactions proceeding on electrodes from various materials in electrolyte solutions promote development of many biosensor types for detection of glucose, amino acids, lactose, urea, pyruvate and other metabolites. Biosensors are successfully applied to environmental contamination control, medical diagnostics and the food industry. 

The construction principle of any biosensor type is based on the use of two functionally different components (Figure 8.1) a bioselective membrane (a bioselector representing a biologically active, immobilized material) and a physical converter of the chemical signal (a transducer). The bioselector is applied directly to the transducer surface, which transforms... 

At the present time, transducers are most often electrochemical converters electrodes (ammeter, pH meter and conductometers), various optical, calorimetric and acoustic converters. The existing variety in biosensor types is formed by varying bioselective structures with different transducers. Note that enzyme and cell biosensors are the most widespread. 

Analite Biosensor Type an basis Matrix Sensitivity Reference... 

Type 1 Forster (or fluorescent) resonance energy transfer (FRET)-based biosensors Type 2 Bimolecular fluorescence complementation (BiFC)-based biosensors Type 3 Single FP-based biosensors... 

PSS-SG composite film was tested for sorption of heme proteins hemoglobin (Hb) and myoglobin (Mb). The peroxidaze activity of adsorbed proteins were studied and evaluated by optical and voltammetric methods. Mb-PSS-SG film on PG electrode was shown to be perspective for detection of dissolved oxygen and hydrogen peroxide by voltammetry with linear calibration in the range 2-30 p.M, and detection limit -1.5 p.M. Obtained composite films can be modified by different types of biological active compounds which is important for the development of sensitive elements of biosensors. 

Biocatalytic membrane electrodes have an ISE or a gas sensing electrode in contact with a thin layer of biocatalytic material, which can be an immobilized enzyme, bacterial particles or a tissue slice, as shown in Fig. 3 The biocatalyst converts substrate (the analyte) into product, which is measured by the electrode. Electrodes of this type are often referred to as biosensors . 

L-arginine and the excellent selectivity of the ammonia electrode for NH3. The working range of biosensors of this type is typically only two to three orders of magnitude with a detection limit of 10 to 10 M. 

Main types of biomolecular recognition elements used in affinity biosensors based on spectroscopy of guided modes include antibodies, nucleic acids and biomimetic materials. Antibodies are used most frequently because of their high affinity, versatility, and commercial availability. 

TYPE OF CATALYZED REACTION BIOSENSOR APPLICATION EXAMPLES ... 

A strain of yeast and a strain of bacterium were co-immobilized to fabricate a biochemical oxygen demand (BOD) sensor based on sol-gel derived composite materials97. This novel type of biosensor was developed for water monitoring and was used to determine the BOD values of OECD synthetic wastewater, domestic wastewater, and lake waters. The microorganisms Trichosporon cutaneum and Bacillus subtilis were coimmobilized in the sol-gel composite material, which was composed of silica and the grafting copolymer of poly (vinyl alcohol) and 4-vinylpyridine (PVA-g-P(4-VP)). 

The goal of this book is to cover the full scope of electrochemical sensors and biosensors. It offers a survey of the principles, design and biomedical applications of the most popular types of electrochemical devices in use today. The book is aimed at all scientists and engineers who are interested in developing and using chemical sensors and biosensors. By discussing recent advances, it is hoped to bridge the common gap between research literature and standard textbooks. 

MWNTs favored the detection of insecticide from 1.5 to 80 nM with a detection limit of InM at an inhibition of 10% (Fig. 2.7). Bucur et al. [58] employed two kinds of AChE, wild type Drosophila melanogaster and a mutant E69W, for the pesticide detection using flow injection analysis. Mutant AChE showed lower detection limit (1 X 10-7 M) than the wild type (1 X 10 6 M) for omethoate. An amperometric FIA biosensor was reported by immobilizing OPH on aminopropyl control pore glass beads [27], The amperometric response of the biosensor was linear up to 120 and 140 pM for paraoxon and methyl-parathion, respectively, with a detection limit of 20 nM (for both the pesticides). Neufeld et al. [59] reported a sensitive, rapid, small, and inexpensive amperometric microflow injection electrochemical biosensor for the identification and quantification of dimethyl 2,2 -dichlorovinyl phosphate (DDVP) on the spot. The electrochemical cell was made up of a screen-printed electrode covered with an enzymatic membrane and combined with a flow cell and computer-controlled potentiostat. Potassium hexacyanoferrate (III) was used as mediator to generate very sharp, rapid, and reproducible electric signals. Other reports on pesticide biosensors could be found in review [17],... 

---