Benzyl alcohol addition

Catalyst Reduction product (%) (benzyl alcohol) Addition product (%) (1-phenylbutanol) Relative rate... 

The blocking effect of benzyl and substituted benzyl alcohol additives on the electrodeposition of cadmium [220] and stabilization of cadmium electrode properties [221] were studied voltammetrically. 

It is readily oxidized by air to benzoic acid. With aqueous KOH gives benzyl alcohol and benzoic acid. Gives addition products with hydrogen cyanide and sodium hydrogen sulphite. 

In the reaction of aryl and alkenyl halides with 1,3-pentadiene (248), amine and alcohol capture the 7r-allylpalladium intermediate to form 249. In the reactions of o-iodoaniline (250) and o-iodobenzyl alcohol (253) with 1,3-dienes, the amine and benzyl alcohol capture the Tr-allylpalladium intermediates 251 and 254 to give 252 and 255[173-175]. The reaction of o-iodoaniline (250) with 1,4-pen tadiene (256) affords the cyclized product 260 via arylpalladiuni formation, addition to the diene 256 to form 257. palladium migration (elimination of Pd—H and readdition to give 258) to form the Tr-allylpalladium 259, and intramolecular displacement of Tr-allylpalladium with the amine to form 260[176], o-Iodophenol reacts similarly. 

In some processes, development additives such as benzyl alcohol are added to the developer to increase the hydrophilic nature of the organic phase. More frequentiy, higher pX couplers are designed to have additional ionizable sites, such as carboxyl, sulfo, or phenoHc groups, to accomplish the same end (57). 

Carbocations can also be generated during the electrolysis, and they give rise to alcohols and alkenes. The carbocations are presumably formed by an oxidation of the radical at the electrode before it reacts or diffuses into solution. For example, an investigation of the electrolysis of phenylacetic acid in methanol has led to the identification of benzyl methyl ether (30%), toluene (1%), benzaldehyde dimethylacetal (1%), methyl phenylacetate (6%), and benzyl alcohol (5%), in addition to the coupling product bibenzyl (26%). ... 

Recently, it was found that the addition of benzylamine to 2-(5//)-furano-3-ylmethanesulfonate 280 (X = O—SOaMe) in methanol afforded a 7 1 mixture of the trans- and cw-methyl-A-benzyl-2-hydroxymethylaziridine-2-carboxylates 281 and 282, respectively (00TL3061). Treatment of 281 with benzyl alcohol in the presence of BF3 OEta furnished, after hydrolysis, rac-cw-amino-a-hydroxy-/3-butyrolactone 284 (Scheme 74). 

The Cannizzaro reaction takes place by nucleophilic addition of OH- to an aldehyde to give a tetrahedral intermediate, which expels hydride ion as a leaving group and is thereby oxidized. A second aldehyde molecule accepts the hydride ion in another nucleophilic addition step and is thereby reduced. Benzaldehyde, for instance, yields benzyl alcohol plus benzoic acid when heated with aqueous NaOH. 

In 1983, Nozaki, Takai, Hiyama, and their coworkers disclosed that vinyl and aryl iodides or bromides are reduced with chromium(n) chloride, and that the resulting organochromium(in) species react smoothly with a host of aldehydes to give allylic or benzylic alcohols in excellent yields.6 As shown in Scheme 1, the chromium(n) chloride-mediated carbonyl addition can be conducted efficiently at... 

Isopropyl alcohol (IPA) or benzyl alcohol (toluol) often are used in the formulation (as early components in the order of addition) to dissolve the surfactant-detergent base [e.g., Duomeen OL (Akzo Nobel Chemicals, Inc.) or Triton N101 (Union Carbide Corp.)]. 

By small-angle neutron scattering experiments on water/AOT/hydrocarbon microemulsions containing various additives, the change of the radius of the miceUar core with the addition of small quantities of additives has been investigated. The results are consistent with a model in which amphiphilic molecules such as benzyl alcohol and octanol are preferentially adsorbed into the water/surfactant interfacial region, decreasing the micellar radius, whereas toluene remains predominantly in the bulk hydrocarbon phase. The effect of n-alcohols on the stability of microemulsions has also been reported [119],... 

Scheme 13 Iron(III)-catalyzed addition of benzylic alcohols to aryl alkynes...

These are generally oxidised with the same kinetics as saturated alcohols but more rapidly. In addition to the example of allyl alcohol - discussed previously (p. 377), several reports exist of oxidations of benzylic alcohols. The importance of a 1 1 complex K = 0.8 0.2 at 25 °C, [HCIO4] = 0.525 M) in the Ce(IV) oxidation is clear from agreement of spectroscopic and kinetic data . For a... 

Especially the favorable mass transfer of micro reactors is seen to be advantageous for the oxidation of benzyl alcohol [58]. As one key to this property, the setting and knowledge on flow patterns are mentioned. Owing to the special type of microreactor used, mixing in a mini trickle bed (gas/liquid flows over a packed particle bed) and creation of large specific interfaces are special aspects of the reactor concept. In addition, temperature can be controlled easily and heat transfer is large, as the whole micro-reactor construction acts as a heat sink. 

An extraordinary way of stabilizing RUO2-coated CdS colloids for H2 generation was chosen by Fendler and co-workers The colloidal particles were generated in situ in surfactant vesicles of dioctadecyldimethylammonium chloride and dihexa-decyl phosphate. Thiophenol as a membrane permeable electron donor acted as a sacrificial additive. Later, a surface active re-usable electron donor (n-C,gH3,)2N — (CHj)—CH2—CHj—SH, Br was incorporated into the vesicles. Its R—SS—R oxidation product could be chemically reduced by NaBH to regenerate the active electron donor. The H2 yields in these systems were only 0.5 %. However, yields up to 10% were later reported for a system in which CdS was incorporated into a polymerizable styrene moiety, (n-C,jH3jC02(CH2)2) N (CH3) (CH2CgH4CH=CH2>, CP, and benzyl alcohol was used as the electron donor. 

Wang used method D to fashion a key intermediate for the synthesis of rishirilide B (Fig. 4.20).21 The 2,4-bis-OBoc-3-methyl-benzyl alcohol (31) undergoes the addition of two equivalents of corresponding Grignard reagent to afford phenol 32 in 75% yield (Fig. 4.20). This material was subsequently elaborated by Mejorado in three steps (61% yield) to the corresponding 2,5-chiral cyclohexadienone 33, which was ultimately transformed into ( + )-rishirilide B (34).22... 

John Ward has functionalized an indane using method D in route to tetra-petalone A (46) (Fig. 4.24).25 The o-OBoc benzyl alcohol 44 undergoes addition with two equivalents of Grignard and affords after acidic workup the phenolic indane 45 in 73% yield. Because of steric effects, only one diastereomer is observed after hydrolysis of the enol ether and thermodynamic equilibration of the... 

The low yields, which are observed among styrenyl adducts, reflect a combination of the poor reactivity of the styrene at the low temperature of the reaction. For example, the combination of t-butyl Grignard with the 2,4-bis-OBoc-benzyl alcohol 15 affords the corresponding benzopyran 50 in only 50% yield even when carried out in the presence of 5-10 equivalents of the styrene (method H, Fig. 4.27).27 Yields for substituted benzopyran styrene adducts are still lower (method G, Fig. 4.27). For example, addition of methyl lithium to 2,4-bis-OBoc-benzylaldehyde 5 followed by the addition of the dienophile and magnesium bromide affords benzopyran 51 in a paltry 27% yield. Method F is entirely ineffective in these cases, because the methyl Grignard reagent competes with the enol ether and with styrene 1,4-addition of methyl supercedes cycloaddition. 

As expected, other enol ethers work well in these procedures. For example, Jones and Selenski find that implementation of method F, which occurs by addition of MeMgBr to benzaldehyde 5 in the presence of dihydropyran (DHP) at 78 °C affords a 66% yield of the corresponding tricyclic ketal 59 with better than 50 1 endo diastereoselectivity (Fig. 4.31).27 On the contrary, Lindsey reports use of method H with the benzyl alcohol 35 and diethylketene acetal. The cycloaddition reaction occurs almost instantaneously upon deprotonation of the benzyl alcohol 35 by f-butyl-magnesium bromide in the presence of the ketene acetal and yields the corresponding benzopyran ortho ester 60 in a 67% yield.29... 

The use of the phenyl phosphate group as both a solid support attachment site and a crucial binding element represents what has been referred to as a pharmacophore-linking strategy [26]. We explored a variety of phenyl phosphate tether functionalities to provide resins varying in substitution pattern and in chemical flexibility (Scheme 1 and Table 4) [22]. All phenyl phosphate resins were synthesized in batch quantities of 20 g or more. Resin synthesis began with the addition of either /mnethoxy-benzyl alcohol or benzyl alcohol to commercially available bis(diisopro-pylamino)chlorophosphine, followed by addition of the diversity phenol [(Ri)-OFl, DIAT (diisopropylamino tetrazole)]. Displacement of the... 

---