Benzene, alkylation bromination

Carboxylic acids are bromodecarboxylated by reaction with (diacetoxyiodo)benzene and bromine under irradiation with a tungsten lamp, leading to respective alkyl or aryl bromides in 50-79% yield [97]. The reaction works very well with carboxylic acids having a primary, secondary or tertiary a-carbon atom, although diphenylacetic acid gives benzophenone. Benzoic acid derivatives are bromodecarboxylated in... 

Like benzenes, alkyl benzenes when treated with chlorine or bromine at low temperature, in the absence of light, and in the presence of a halogen carrier undergo nuclear halogenation. 

Studies of the relative rates of the zinc chloride-catalysed bromination of alkyl-and halogeno-benzenes in nitromethane at 25 °C have lead to the suggestion that the rate-determining step of the reaction is formation of Ji-complex, since low substrate selectivity was found to be coupled with high (i.e. normal) positional selectivity323. Under some conditions (column 1 in Table 75) the low selectivity... 

Cyanide and thiocyanate anions in aqueous solution can be determined as cyanogen bromide after reaction with bromine [686]. The thiocyanate anion can be quantitatively determined in the presence of cyanide by adding an excess of formaldehyde solution to the sample, which converts the cyanide ion to the unreactive cyanohydrin. The detection limits for the cyanide and thiocyanate anions were less than 0.01 ppm with an electron-capture detector. Iodine in acid solution reacts with acetone to form monoiodoacetone, which can be detected at high sensitivity with an electron-capture detector [687]. The reaction is specific for iodine, iodide being determined after oxidation with iodate. The nitrate anion can be determined in aqueous solution after conversion to nitrobenzene by reaction with benzene in the presence of sulfuric acid [688,689]. The detection limit for the nitrate anion was less than 0.1 ppm. The nitrite anion can be determined after oxidation to nitrate with potassium permanganate. Nitrite can be determined directly by alkylation with an alkaline solution of pentafluorobenzyl bromide [690]. The yield of derivative was about 80t.with a detection limit of 0.46 ng in 0.1 ml of aqueous sample. Pentafluorobenzyl p-toluenesulfonate has been used to derivatize carboxylate and phenolate anions and to simultaneously derivatize bromide, iodide, cyanide, thiocyanate, nitrite, nitrate and sulfide in a two-phase system using tetrapentylammonium cWoride as a phase transfer catalyst [691]. Detection limits wer Hi the ppm range. 

Changes in intramolecular selectivity in the bromination and nitration of alkyl-benzenes in acidic media have been attributed to changes in medium polarity or changes in electrophile solvation. Mass spectrometric studies of the first stage in the gas-phase reactions of halobenzenes, furan, thiophene and pyrrole with alkyl cations have been rationalized in terms of co-existing a- and tt-complexes. The extent of... 

Isoquinoline, like quinoline, is protonated and alkylated at the nitrogen atom, but electrophilic substitution in the benzene ring is also easily achieved (Scheme 3.14). Sulfonation with oleum gives mainly the 5-sulfonic acid, but fuming nitric acid and concentrated sulfuric acid at 0 C produce a 1 1 mixture of 5- and 8-nitroisoquinolines. Bromination in the presence of aluminium trichloride at 75 °C gives a 78% yield of 5-bromoisoquinoline. 

Kinetic studies on alkyl- and phenyl-isoxazoles in 85% acetic acid at 150°C have shown that isoxazoles are 100-1000 times more reactive than benzene. The relative 4-bromination rates for 5-phenyl- 3,4-diphenyl- ... 

Amberlite XAD-2 and XAD-4 resins, for example, contain significant quantities of alkyl derivatives of benzene, styrene, naphthalene, and biphenyl as received from the supplier. PUF products, on the other hand, generally contain numerous contaminants peculiar to one of the several patented commercial manufacturing processes. These include, but are not limited to, the following classes of chemical contaminants isocyanate derivatives (e.g., toluene diisocyanates), alkyl amines, aliphatic acids, and brominated aromatics (e.g., fire retardants). 

Gngnard reagents - [BROMINE COMPOUNDS] (Vol 4) - [ESTERS, ORGANIC] (Vol 9) -from benzene [BENZENE] (Vol 4) -chemiluminescence [LUMINESCENTMATERIALS - CHEMILUMINESCENCE] (Vol 15) -magnesium alkyls from [MAGNESIUM COMPOUNDS] (Vol 15) -reaction of propylene oxides [PROPYLENE OXIDE] (Vol 20) -for silanes [SILICON COMPOUNDS - SILANES] (Vol 22) -for sulfoxide synthesis [SULFOXIDES] (Vol 23)... 

The selectivity of chlorination reactions carried on in solution is increased markedly in the presence of benzene or alkyl-substituted benzenes because benzene and other arenes form loose complexes with chlorine atoms. This substantially cuts down chlorine-atom reactivity, thereby making the chlorine atoms behave more like bromine atoms. 

---