Arylation by aryl halides

Ethene and mono-substituted alkenes can be arylated by aryl halides in presence... 

This review focuses on the synthetic applications of carbon-hydrogen bond arylation by aryl halides, concentrating on palladium and copper catalysis. Mechanistic issues will be covered only briefly. Some examples of carbon-hydrogen... 

The ruthenium-catalysed arylation, by aryl halides, of benzylic amines carrying a pyridine coordinating group is thought to involve a concerted metallation-deprotonation pathway to give intermediates such as (96), followed by oxidative addition of the aryl halide to ruthenium and then reductive elimination. The reaction can be successM with aryl chlorides, as well as bromides and iodides, but here there are mechanistic differences. The ability of ruthenium to activate remote ring positions to electrophilic substitution has been referred to earlier, see Ref. 97. The reaction of ruthenium-coordinated 2-pyridyl arenes (51) with secondary alkyl halides has been shown to result in the formation of metfl-alkylated products. ... 

Ullman reaction The synthesis of diaryls by the condensation of aromatic halides with themselves or other aromatic halides, with the concomitant removal of halogens by a metal, e.g. copper powder thus bromobenzene gives diphenyl. The reaction may be extended to the preparation of diaryl ethers and diaryl thio-ethers by coupling a metal phenolate with an aryl halide. 

Since Grignard reagents can easily be obtained from aryl halides, they are of special value in the s nthesis of many aromatic compounds, particularly as, for reasons already stated (pp. 270, 276), aromatic compounds cannot generally be prepared by means of ethyl acetoacetate and ethyl malonate. 

The products from a mixture of alkyl and aryl halides may be represented by the following scheme ... 

The following give abnormal results when treated with chlorosulphonio acid alone, preferably at 50° for 30-60 minutes —fluobenzene (4 4 -difluorodiplienyl-sulphone, m.p. 98°) j iodobenzene (4 4 -di-iododiphenylsulplione, m.p. 202°) o-diclilorobenzene (3 4 3. -4 -tetrachlorodiphenylsulphone, m.p. 176°) and o-dibromobenzene (3 4 3 4 -tetrabromodiphenylsulphone, m.p. 176-177°). The resulting sulphones may be crystallised from glacial acetic acid, benzene or alcohol, and are satisfactory for identification of the original aryl halide. In some cases sulphones accompany the sulphonyl chloride they are readily separated from the final sulphonamide by their insolubility in cold 6N sodium hydroxide solution the sulphonamides dissolve readily and are reprecipitated by 6iV hydrochloric acid. 

By the hydrolysis of nitriles. The nitriles may be easily prepared either from amines by the Sandmeyer reaction (Section IV,66) or by the action of cuprous cyanide upon aryl halides (compare Section IV,163). Benzyl cyanide... 

The alkyl- or aryl-halogenosilanes are prepared commercially by passing the vapour of an alkyl or an aryl halide over a heated intimate mixture of powdered sihcoii and either copper or silver. 

Carbon-oxygen bonds are formed by the Ullmann reaction (- coupling of aryl halides with copper) which has been varied in alkaloid chemistry to produce diaryl ethers instead of biaryls. This is achieved by the use of CuO in basic media (T. Kametani, 1969 R.W. Dos-kotch, 1971). 

The reactions of the second class are carried out by the reaction of oxidized forms[l] of alkenes and aromatic compounds (typically their halides) with Pd(0) complexes, and the reactions proceed catalytically. The oxidative addition of alkenyl and aryl halides to Pd(0) generates Pd(II)—C a-hondi (27 and 28), which undergo several further transformations. 

In Grignard reactions, Mg(0) metal reacts with organic halides of. sp carbons (alkyl halides) more easily than halides of sp carbons (aryl and alkenyl halides). On the other hand. Pd(0) complexes react more easily with halides of carbons. In other words, alkenyl and aryl halides undergo facile oxidative additions to Pd(0) to form complexes 1 which have a Pd—C tr-bond as an initial step. Then mainly two transformations of these intermediate complexes are possible insertion and transmetallation. Unsaturated compounds such as alkenes. conjugated dienes, alkynes, and CO insert into the Pd—C bond. The final step of the reactions is reductive elimination or elimination of /J-hydro-gen. At the same time, the Pd(0) catalytic species is regenerated to start a new catalytic cycle. The transmetallation takes place with organometallic compounds of Li, Mg, Zn, B, Al, Sn, Si, Hg, etc., and the reaction terminates by reductive elimination. 

In the reaction of Q,/3-unsaturated ketones and esters, sometimes simple Michael-type addition (insertion and hydrogenolysis, or hydroarylation, and hydroalkenylation) of alkenes is observed[53,54]. For example, a simple addition product 56 to methyl vinyl ketone was obtained by the reaction of the heteroaromatic iodide 55[S5]. The corresponding bromide affords the usual insertion-elimination product. Saturated ketones are obtained cleanly by hydroarylation of o,/3l-unsaturated ketones with aryl halides in the presence of sodium formate, which hydrogenolyses the R—Pd—I intermediate to R— Pd—H[56]. Intramolecular hydroarylation is a useful reaction. The diiodide 57 reacts smoothly with sodium formate to give a model compound for the afla-toxin 58. (see Section 1.1.6)[57]. Use of triethylammonium formate and BU4NCI gives better results. 

An Q-arylalkanoate is prepared by the reaction of aryl halide or triflate with the ketene silyl acetal 74 as an alkene component. However, the reaction is explained by transmetallation of Ph - Pd—Br with 74 to generate the Pd eno-late 75, which gives the a-arylalkanoate by reductive elimination[76]. 

The unconjugated alkenyl oxirane 133 reacts with aryl halides to afford the arylated allylic alcohol 134. The reaction is explained by the migration of the Pd via the elimination and readdition of H—Pd—1[107]. 

An efficient carboannulation proceeds by the reaction of vinylcyclopropane (135) or vinylcyclobutane with aryl halides. The multi-step reaction is explained by insertion of alkene, ring opening, diene formation, formation of the TT-allylpalladium 136 by the readdition of H—Pd—I, and its intramolecular reaction with the nucleophile to give the cyclized product 137[I08]. 

The diazonium salts 145 are another source of arylpalladium com-plexes[114]. They are the most reactive source of arylpalladium species and the reaction can be carried out at room temperature. In addition, they can be used for alkene insertion in the absence of a phosphine ligand using Pd2(dba)3 as a catalyst. This reaction consists of the indirect substitution reaction of an aromatic nitro group with an alkene. The use of diazonium salts is more convenient and synthetically useful than the use of aryl halides, because many aryl halides are prepared from diazonium salts. Diazotization of the aniline derivative 146 in aqueous solution and subsequent insertion of acrylate catalyzed by Pd(OAc)2 by the addition of MeOH are carried out as a one-pot reaction, affording the cinnamate 147 in good yield[115]. The A-nitroso-jV-arylacetamide 148 is prepared from acetanilides and used as another precursor of arylpalladium intermediate. It is more reactive than aryl iodides and bromides and reacts with alkenes at 40 °C without addition of a phosphine ligandfl 16]. 

When allene derivatives are treated with aryl halides in the presence of Pd(0), the aryl group is introduced to the central carbon by insertion of one of the allenic bonds to form the 7r-allylpalladium intermediate 271, which is attacked further by amine to give the allylic amine 272. A good ligand for the reaction is dppe[182]. Intramolecular reaction of the 7-aminoallene 273 affords the pyrrolidine derivative 274[183]. 

The o-keto ester 513 is formed from a bulky secondary alcohol using tricy-clohexylphosphine or triarylphosphine, but the selectivity is low[367-369]. Alkenyl bromides are less reactive than aryl halides for double carbonyla-tion[367], a-Keto amides are obtained from aryl and alkenyl bromides, but a-keto esters are not obtained by their carbonylation in alcohol[370]. A mechanism for the double carbonylation was proposed[371,372],... 

The 2-substituted 3-acylindoles 579 are prepared by carbonylative cycliza-tion of the 2-alkynyltrifluoroacetanilides 576 with aryl halides or alkenyl tri-flates. The reaction can be understood by the aminopalladation of the alkyne with the acylpalladium intermediate as shown by 577 to generate 578, followed by reductive elimination to give 579[425]. 

Aryl and alkenyl phenyl sulfides are prepared by the reaction of aryl and alkenyl halides and inflates with tributylstannyl phenyl sulfide. 2-Chloropyrimidine (737) is used for the coupling[606,607]. The diaryl or divinyl sulfide 739 is prepared by the reaction of distannyl sulfide (738)[548], N,N-Diethylaminotributyltin (740) reacts with aryl halides to give arylamines[608]. 

The mixed triarylphosphine 787 can be prepared by the reaction of (trimethylsily )dipheny phosphine (786) with aryl halides[647]. Ph3P is converted into the alkenylphosphonium salt 788 by the reaction of alkenyl tri-flates[648]. 

Aryl sulfides are prepared by the reaction of aryl halides with thiols and thiophenol in DMSO[675,676] or by the use of phase-transfer catalysis[677]. The alkenyl sulfide 803 is obtained by the reaction of lithium phenyl sulfide (802) with an alkenyl bromide[678]. 

Formate is an excellent hydride source for the hydrogenolysis of aryl halides[682]. Ammonium or triethylammonium formate[683] and sodium formate are mostly used[684,685]. Dechlorination of the chloroarene 806 is carried out with ammonium formate using Pd charcoal as a catalyst[686]. By the treatment of 2,4,6-trichloroamline with formate, the chlorine atom at the /iiara-position is preferentially removed[687]. The dehalogenation of 2,4-diha-loestrogene is achieved with formic acid, KI, and ascorbic acid[688]. 

Another method for the hydrogenoiysis of aryl bromides and iodides is to use MeONa[696], The removal of chlorine and bromine from benzene rings is possible with MeOH under basic conditions by use of dippp as a ligand[697]. The reduction is explained by the formation of the phenylpalladium methoxide 812, which undergoes elimination of /i-hydrogen to form benzene, and MeOH is oxidized to formaldehyde. Based on this mechanistic consideration, reaction of alcohols with aryl halides has another application. For example, cyclohex-anol (813) is oxidized smoothly to cyclohexanone with bromobenzene under basic conditions[698]. 

The terminal amino group of 2-hydrazino-4-phenylthiazole is also the reactive center in reactions with activated aryl halides such as 288. A solution of the product (289) obtained from this reaction when shaken with PbOj gives a deeply colored radical, whose structure has been studied by ESR (Scheme 173) (532. 533). 

A key step in the reaction mechanism appears to be nucleophilic attack on the alkyl halide by the negatively charged copper atom but the details of the mechanism are not well understood Indeed there is probably more than one mechanism by which cuprates react with organic halogen compounds Vinyl halides and aryl halides are known to be very unreactive toward nucleophilic attack yet react with lithium dialkylcuprates... 

Overall the carboxylation of Grignard reagents transforms an alkyl or aryl halide to a carboxylic acid in which the carbon skeleton has been extended by one carbon atom... 

Aryl halides react too slowly to undergo substitution by the Sn2 mechanism with the sodium salt of diethyl malonate and so the phenyl substituent of phenobarbital cannot be introduced in the way that alkyl substituents can... 

Aryl halides cannot be converted to arylammes by the Gabriel synthesis because they do not undergo nucleophilic substitution with N potassiophthalimide m the first step of the procedure... 

The strength of their carbon-halogen bonds causes aryl halides to react very slowly in reactions in which carbon-halogen bond cleavage is rate determining as m nude ophilic substitution for example Later m this chapter we will see examples of such reactions that do take place at reasonable rates but proceed by mechanisms distinctly dif ferent from the classical S l and 8 2 pathways... 

The two mam methods for the preparation of aryl halides halogenation of arenes by electrophilic aromatic substitution and preparation by way of aryl diazomum salts were described earlier and are reviewed m Table 23 2 A number of aryl halides occur natu rally some of which are shown m Figure 23 1... 

Because carbon is sp hybridized m chlorobenzene it is more electronegative than the sp hybridized carbon of chlorocyclohexane Consequently the withdrawal of electron density away from carbon by chlorine is less pronounced m aryl halides than m alkyl halides and the molecular dipole moment is smaller... 

The generally accepted mechanism for nucleophilic aromatic substitution m nitro substituted aryl halides illustrated for the reaction of p fluoromtrobenzene with sodium methoxide is outlined m Figure 23 3 It is a two step addition-elimination mechanism, m which addition of the nucleophile to the aryl halide is followed by elimination of the halide leaving group Figure 23 4 shows the structure of the key intermediate The mech anism is consistent with the following experimental observations... 

Very strong bases such as sodium or potassium amide react readily with aryl halides even those without electron withdrawing substituents to give products corresponding to nucleophilic substitution of halide by the base... 

The reaction proceeds by formation of the Grignard reagent from o bromofluorobenzene Because the order of reactivity of magnesium with aryl halides is Arl > ArBr > ArCl > ArF the Gngnard reagent has the structure shown and forms benzyne by loss of the salt FMgBr... 

Some aryl halides occur naturally but most are the products of organic synthesis The methods by which aryl halides are prepared were recalled m Table 23 2... 

---