Aromatic hydrocarbons xylene

The second process to finish phthalocyanine, which is more important for P-copper phthalocyanine, involves grinding the dry or aqueous form in a ball mill or a kneader (64). Agents such as sodium chloride, which have to be removed by boiling with water after the grinding, are used. Solvents like aromatic hydrocarbons, xylene, nitrobenzene or chlorobenzene, alcohols, ketones, or esters can be used (1). In the absence of a solvent, the cmde P-phthalocyanine is converted to the a-form (57,65) and has to be treated with a solvent to regain the P-modification. The aggregate stmcture also has an impact on the dispersion behavior of a- and P-copper phthalocyanine pigments (66). 

Aromatic hydrocarbons Xylene-isomers Toluene Ethylbenzenes... 

These often correspond to aromatic hydrocarbons (xylene, toluene, ethylbenzenes, etc.) and ketones (methyl-ethylketone, methyl-isobutylketone, methyl-propyl-ketone, etc.). 

More precisely, the rate of ozone formation depends closely on the chemical nature of the hydrocarbons present in the atmosphere. A reactivity scale has been proposed by Lowi and Carter (1990) and is largely utilized today in ozone prediction models. Thus the values indicated in Table 5.26 express the potential ozone formation as O3 formed per gram of organic material initially present. The most reactive compounds are light olefins, cycloparaffins, substituted aromatic hydrocarbons notably the xylenes, formaldehyde and acetaldehyde. Inversely, normal or substituted paraffins. 

Oxidation of a side chain by alkaline permanganate. Aromatic hydrocarbons containing side chains may be oxidised to the corresponding acids the results are generally satisfactory for compounds with one side chain e.g., toluene or ethylbenzene -> benzoic acid nitrotoluene -> nitrobenzoic acid) or with two side chains e.g., o-xylene -> phthalic acid). 

Concentrated sulphuric acid. The paraffin hydrocarbons, cych-paraffins, the less readily sulphonated aromatic hydrocarbons (benzene, toluene, xylenes, etc.) and their halogen derivatives, and the diaryl ethers are generally insoluble in cold concentrated sulphuric acid. Unsaturated hydrocarbons, certain polyalkylated aromatic hydrocarbons (such as mesitylene) and most oxygen-containing compounds are soluble in the cold acid. 

More information has appeared concerning the nature of the side reactions, such as acetoxylation, which occur when certain methylated aromatic hydrocarbons are treated with mixtures prepared from nitric acid and acetic anhydride. Blackstock, Fischer, Richards, Vaughan and Wright have provided excellent evidence in support of a suggested ( 5.3.5) addition-elimination route towards 3,4-dimethylphenyl acetate in the reaction of o-xylene. Two intermediates were isolated, both of which gave rise to 3,4-dimethylphenyl acetate in aqueous acidic media and when subjected to vapour phase chromatography. One was positively identified, by ultraviolet, infra-red, n.m.r., and mass spectrometric studies, as the compound (l). The other was less stable and less well identified, but could be (ll). 

Properties. The DPXs are all crystalline soHds melting points and densities are given in Table 1. Their solubiUty in aromatic hydrocarbons is Limited. At 140°C, the solubiUty of DPXN in xylene is only about 10%. DPXC is more readily soluble in chlorinated solvents, eg, in methylene chloride at 25°C its solubihty is 10%. In contrast, the corresponding figure for DPXN is 1.5%. 

Solvents for A-type inks are aUphatic hydrocarbons, for example, hexane, textile spidts, Apco Thinner, lactane, VM P (varnish makers and painters ) naphtha, and mineral spirits. Aromatic hydrocarbons such as toluene and xylene are solvents for B-type inks. Generally, a blend of aUphatic and aromatic hydrocarbons is commonly used for this type of ink. 

PMMA is not affected by most inorganic solutions, mineral oils, animal oils, low concentrations of alcohols paraffins, olefins, amines, alkyl monohahdes and ahphatic hydrocarbons and higher esters, ie, >10 carbon atoms. However, PMMA is attacked by lower esters, eg, ethyl acetate, isopropyl acetate aromatic hydrocarbons, eg, benzene, toluene, xylene phenols, eg, cresol, carboHc acid aryl hahdes, eg, chlorobenzene, bromobenzene ahphatic acids, eg, butyric acid, acetic acid alkyl polyhaHdes, eg, ethylene dichloride, methylene chloride high concentrations of alcohols, eg, methanol, ethanol 2-propanol and high concentrations of alkahes and oxidizing agents. 

Reformulating to reduce HAP solvents frequently means that solvent blend costs increase. The newer blends are generally not be as effective. For example, many coatings were usually formulated using ketones as the active solvents with aromatic hydrocarbons as diluents. This combination produced the most cost-effective formulations. However, when MEK, MIBK, toluene, and xylene became HAP compounds, less-effective solvents had to be used for reformulation. Esters are the most common ketone replacements, and aUphatic diluents would replace the aromatic hydrocarbons. In this situation, more strong solvent is required compared to the ketone/aromatic formulation and costs increase. The combination of reduced VOC emissions and composition constraints in the form of HAP restrictions have compHcated the formulator s task. 

Aromatic Hydrocarbons. Sulfolane is used principally as a solvent for extraction of benzene, toluene, and xylene from mixtures containing aHphatic hydrocarbons (33—37). The sulfolane process was introduced in 1959 by SheU Development Company, and that process is Hcensed by Universal OH Products. A sulfolane extraction process is also Hcensed by the Atlantic Richfield Company. In 1994, worldwide consumption was estimated at ca 6974 t/yr of sulfolane for 137 sulfolane extraction units (see Bix processes Extraction, liquid-liquid Xylenes and ethylbenzene). 

Tetracyanoethylene is colorless but forms intensely colored complexes with olefins or aromatic hydrocarbons, eg, benzene solutions are yellow, xylene solutions are orange, and mesitylene solutions are red. The colors arise from complexes of a Lewis acid—base type, with partial transfer of a TT-electron from the aromatic hydrocarbon to TCNE (8). TCNE is conveniendy prepared in the laboratory from malononitrile [109-77-3] (1) by debromination of dibromoma1 ononitrile [1855-23-0] (2) with copper powder (9). The debromination can also be done by pyrolysis at ca 500°C (10). 

Unbumed Hydrocarbons Various unburned hydrocarbon species may be emitted from hydrocarbon flames. In general, there are two classes of unburned hydrocarbons (1) small molecules that are the intermediate products of combustion (for example, formaldehyde) and (2) larger molecules that are formed by pyro-synthesis in hot, fuel-rich zones within flames, e.g., benzene, toluene, xylene, and various polycyclic aromatic hydrocarbons (PAHs). Many of these species are listed as Hazardous Air Pollutants (HAPs) in Title III of the Clean Air Act Amendment of 1990 and are therefore of particular concern. In a well-adjusted combustion system, emission or HAPs is extremely low (typically, parts per trillion to parts per billion). However, emission of certain HAPs may be of concern in poorly designed or maladjusted systems. 

Aromatic solvents or polycyclic aromatic hydrocarbons (PAFI) in water, e.g. can be detected by QCM coated with bulk-imprinted polymer layers. Flere, the interaction sites are not confined to the surface of the sensitive material but are distributed within the entire bulk leading to very appreciable sensor responses. Additionally, these materials show high selectivity aromatic solvents e.g. can be distinguished both by the number of methyl groups on the ring (toluene vs. xylene, etc.) and by their respective position. Selectivity factors in this case reach values of up to 100. 

Azeotropic distillation with methanol or 2-ethoxyethanol (cellosolve) has been used to obtain highly purified saturated hydrocarbons and aromatic hydrocarbons such as xylenes and isopropylbenzenes. 

Plants have now been installed by some manufacturers to produce ethylbenzene via catalytic reforming processes. The reforming process is one which converts aliphatic hydrocarbons into a mixture of aromatic hydrocarbons. This may be subsequently fractionated to give benzene, toluene and a xylene fraction from which ethylbenzene may be obtained. 

Of the top ten most frequently reported toxic chemicals on the TRI list, the prevalence of volatile chemicals explains the air intensive toxic chemical loading of the refining industry. Nine of the ten most commonly reported toxic chemicals are highly volatile. Seven of the ten are aromatic hydrocarbons (benzene, toluene, xylene, cyclohexane, 1,2,4-trimethylbenzene, and ethylbenzene). 

Although many of the aromatic compounds based on benzene have pleasant odors, they are usually toxic, and some are carcinogenic. Volatile aromatic hydrocarbons are highly flammable and burn with a luminous, sooty flame. The effects of molecular size (in simple arenes as well as in substituted aromatics) and of molecular symmetry (e.g., xylene isomers) are noticeable in physical properties [48, p. 212 49, p. 375 50, p. 41]. Since the hybrid bonds of benzene rings are as stable as the single bonds in alkanes, aromatic compounds can participate in chemical reactions without disrupting the ring structure. 

Benzene, toluene, xylenes (BTX), and ethylbenzene are the aromatic hydrocarbons with a widespread use as petrochemicals. They are important precursors for many commercial chemicals and polymers such as... 

Simple aromatic hydrocarbons come from two main sources coal and petroleum. Coal is an enormously complex mixture made up primarily of large arrays of benzene-like rings joined together. Thermal breakdown of coal occurs when it is heated to 1000 °C in the absence of air, and a mixture of volatile products called coal for boils off. Fractional distillation of coal tar yields benzene, toluene, xylene (dimethylbenzene), naphthalene, and a host of other aromatic compounds (Figure 15.1). 

Aluminum trichloride catalyzes the reaction of benzopentathiepin with aromatic hydrocarbons to yield thianthrcncs. Thus, benzene, / -xylene and naphthalene give, respectively, 6 (44%), 7 (75 %) and 8 (93 %).409... 

That the reaction with a lower rate constant is taking place preferentially and that the rate increases during the reaction are phenomena that can also occur with parallel reactions. As an example, Wauquier and Jungers (48), when studying competitive hydrogenation of a series of couples of aromatic hydrocarbons on Raney-nickel, have observed these phenomena for the couple tetraline-p-xylene (Table I). The experimental result was... 

Aromatic hydrocarbons G L Benzene Toluene Xylene Coal tar distillation Vehicle exhauks Petrochemicals Pesticides Herbicides... 

---