Anode catalyst catalysis

A.C.C. Tseung, K.Y. Chen, 1997. Hydrogen spill-over effect on Pt/WOj anode catalysts. Catalysis Today, 38 439-443. 

The ideal performance of a fuel cell depends on the electrochemical reactions that occur with different fuels and oxygen as summarized in Table 2-1. Low-temperature fuel cells (PEFC, AFC, and PAFC) require noble metal electrocatalysts to achieve practical reaction rates at the anode and cathode, and H2 is the only acceptable fuel. With high-temperature fuel cells (MCFC, ITSOFC, and SOFC), the requirements for catalysis are relaxed, and the number of potential fuels expands. Carbon monoxide "poisons" a noble metal anode catalyst such as platinum (Pt) in low-temperature... 

Reddington et al. (66) reported the synthesis and screening of a 645-member discrete materials library L9 as a source of catalysts for the anode catalysis of direct methanol fuel cells (DMFCs), with the relevant goal of improving their properties as fuel cells for vehicles and other applications. The anode oxidation in DMFCs is reported in equation 1 (Fig. 11.12). At the time of the publication, state-of-the-art anode catalysts were either binary Pt-Ru alloys (67) or ternary Pt-Ru-Os alloys (68). A systematic exploration of ternary or higher order alloys as anode catalysts for DMFCs was not available, and predictive models to orient the efforts were also lacking. 

With respect to fuel cell catalysis, most research has been focused on cathode ORR catalysts development, because the ORR kinetics are much slower than flic anodic HOR kinetics in other words, the fuel cell voltage drop polarized by load is due mainly to the cathode ORR overpotential [7, 8]. However, in some cases the overpotential of the anodic HOR can also contribute a non-negligible portion of the overall fuel cell voltage drop [8]. Therefore, the catalytic HOR on the fuel cell anode catalyst is also worth examining. 

Q. (2003) Pt based anode catalysts for direct ethanol fuel cells. Applied Catalysis B Environmental, 46 (2), 273-285. 

Chen, Y., Zhuang, L., and Lu, J. (2007) Non-Pt anode catalysts for alkaline direct alcohol fuel cells. Chinese Journal of Catalysis, 28 (10), 870-874. 

Qi, J., Xin, L., Chadderdon, D.J., Qiu, Y., Jiang, Y., Benipal, N., Liang, C.H., and Li, W.Z. (2014) Electrocatalytic selective oxidation of glycerol to tartronate on Au/ C anode catalysts in anion exchange membrane fuel cells with electricity cogeneration. Applied Catalysis B Environmental, 154, 360-368. 

Lobato, J., Canizares, P., Rodrigo, M. A., Linares, J.J. (2009) Study of different bimetaUic anodic catalysts supported on carbon for a high temperature polybenzimidazole-based direct ethanol fuel cell. Applied Catalysis B Environmental, 91, 269-274. 

Mikroreaktoren sind so klein wie ein Fingerhut, Handdsblatt, May 1998 Steep progress in microelectronics, sensor and analytical techniques in the past transport intensification for catalysis first catalytic micro reactors available partial oxidation to acrolein partial hydrogenation to cyclododecene anodically oxidized catalyst supports as alternatives to non-porous supports study group on micro reactors at Dechema safety, selectivity, high pressure exclusion of using particle solutions limited experience with lifetime of micro reactors [236],... 

Poisoning of platinum fuel cell catalysts by CO is undoubtedly one of the most severe problems in fuel cell anode catalysis. As shown in Fig. 6.1, CO is a strongly bonded intermediate in methanol (and ethanol) oxidation. It is also a side product in the reformation of hydrocarbons to hydrogen and carbon dioxide, and as such blocks platinum sites for hydrogen oxidation. Not surprisingly, CO electrooxidation is one of the most intensively smdied electrocatalytic reactions, and there is a continued search for CO-tolerant anode materials that are able to either bind CO weakly but still oxidize hydrogen, or that oxidize CO at significantly reduced overpotential. 

The catalyst is not necessary either for the electrocarboxylation of aryl halides or various benzylic compounds when conducted in undivided cells and in the presence of a sacrificial anode of aluminum [105] or magnesium [8,106], Nevertheless both methods, i.e., catalysis and sacrificial anode, can be eventually associated in order to perform the electrocarboxylation of organic halides having functional groups which are not compatible with a direct electroreductive process. 

Most of the catalysts employed in PEM and direct methanol fuel cells, DMFCs, are based on Pt, as discussed above. However, when used as cathode catalysts in DMFCs, Pt containing catalysts can become poisoned by methanol that crosses over from the anode. Thus, considerable effort has been invested in the search for both methanol resistant membranes and cathode catalysts that are tolerant to methanol. Two classes of catalysts have been shown to exhibit oxygen reduction catalysis and methanol resistance, ruthenium chalcogen based catalysts " " and metal macrocycle complexes, such as porphyrins or phthalocyanines. ... 

Figure 3.3.14 Experimental ORR activity of dealloyed Pt-Cu and Pt-Ni core-shell nanoparticle ORR catalysts compared to a pure-Pt nanoparticle catalyst. All three catalyst particles are supported on a high surface area carbon material indicated by the suffix 1C. The shift of the j-E curve of the core-shell catalysts indicates the onset of oxygen reduction catalysis at a more anodic electrode potential (equivalent to a lower overpotential) and hence represents improved ORR reactivity compared to pure Pt.

---