Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Analytical techniques Auger electron spectroscopy

Commercial surface analysis systems have been available since around 1970 (1). Most of the early instruments were dedicated to longer-term fundamental research, even if they were located at industrial research centers. However. since the latter part of the 1980s, the most popular surface analytical techniques. Auger electron spectroscopy (AES), secondary-ion mass spectrometry (SIMS) and X-ray photoelectron spectroscopy (XPS), have gained a greater level of acceptance in industry due to their improved reliability. Surface analysis is now routinely used to solve complex industrial problem.s in both research and quality assurance environments. It has been specifically the move toward the use of these techniques in quality-assurance-type applications that has started to force the development of national/international documentary standards in order to formalize the methods of application of the techniques. [Pg.907]

The importance of surface and chemical analysis techniques in electronics corrosion testing cannot be overstated. These powerful tools contribute to solving problems and elucidating corrosion mechanisms in simple and complex systems. Chemical analysis techniques include infrared (IR), ultraviolet (UV), and RAMAN spectroscopy X-ray diffraction atomic adsorption emission and mass spectroscopy gas and liquid chromatography and optical and transmission electron microscopy. Surface analytical techniques include electron spectroscopy for chemical analysis (ESCA), Auger, secondary ion mass spectroscopy (SIMS), and ion scattering spectroscopy (ISS). These important techniques used in conjunction with corrosion tests are described in another section of this manual. [Pg.760]

The application of surface analytical techniques, most notably X-ray Photoelectron Spectroscopy (XPS) and Auger Electron Spectroscopy (AES), or its spatially resolved counterpart. Scanning Auger Microanalysis (SAM), is of great value in understanding the performance of a catalyst. However, the results obtained from any of these techniques are often difficult to interpret, especially when only one technique is used by itself. [Pg.37]

All analytical methods that use some part of the electromagnetic spectrum have evolved into many highly specialized ways of extracting information. The interaction of X-rays with matter represents an excellent example of this diversity. In addition to straightforward X-ray absorption, diffraction, and fluorescence, there is a whole host of other techniques that are either directly X-ray-related or come about as a secondary result of X-ray interaction with matter, such as X-ray photoemission spectroscopy (XPS), surface-extended X-ray absorption fine structure (SEXAFS) spectroscopy, Auger electron spectroscopy (AES), and time-resolved X-ray diffraction techniques, to name only a few [1,2]. [Pg.292]

Passivation of active metals to hydrogen reaction has been recognized as an important problem in basic metal-hydrogen studies, especially in their technological application to various situations. Few investigations have addressed these difficulties. The advent of modern surface analytical techniques such as photoelectron spectroscopyy Auger electron spectroscopy, and ion spectrometry offer a tremendous opportunity to attack the passivation question. Each of these techniques is discussed with regard to their capabilities and application to hydride kinetics. [Pg.389]

The analysis of corrosion scale or product may be done by wet chemical methods such as spectrophotometry or atomic absorption spectrophotometry in cases where the removal of corrosion scale is permitted, or by surface analytical techniques such as X-ray photoelectron spectroscopy, Auger electron spectroscopy, electron microprobe analysis, by energy dispersive X-ray analysis in the case of samples which need to be preserved. [Pg.164]

The chemical, physical and technical properties of catalysts and many other porous technical materials are to a very great degree determined by both their texture and their structure, but the analytical composition of the surface also plays a role. Modern surface analysis techniques, like auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS) have revealed that in many cases the atomic composition of the surface of a solid material deviates strongly from the composition of the bulk material. [Pg.419]

Surface analytical techniques such as Auger electron spectroscopy (27), X-ray photoelectron spectroscopy (28), and secondary-ion mass spectrometry (29) have been used to study LB films. Synchrotron radiation is a particularly powerful probe enabling X-ray near-edge structure and extended X-ray absorption fine structure to be measured. Angle-resolved photoemission studies (30) confirmed the existence of a one-dimensional energy band along the (CH2)jc chain in a fatty acid salt film. [Pg.236]


See other pages where Analytical techniques Auger electron spectroscopy is mentioned: [Pg.938]    [Pg.117]    [Pg.700]    [Pg.139]    [Pg.265]    [Pg.121]    [Pg.65]    [Pg.93]    [Pg.137]    [Pg.17]    [Pg.398]    [Pg.327]    [Pg.279]    [Pg.287]    [Pg.231]    [Pg.251]    [Pg.760]    [Pg.122]    [Pg.153]    [Pg.154]    [Pg.177]    [Pg.59]    [Pg.337]    [Pg.166]    [Pg.89]    [Pg.467]    [Pg.280]    [Pg.201]    [Pg.279]    [Pg.287]    [Pg.497]    [Pg.343]    [Pg.276]    [Pg.586]    [Pg.214]    [Pg.505]    [Pg.440]    [Pg.193]    [Pg.15]    [Pg.4]   
See also in sourсe #XX -- [ Pg.124 ]




SEARCH



Analytical spectroscopies

Analytical techniques

Auger

Auger electron

Auger technique

Electron analytical

Electron analytics

Electron techniques

Electronic spectroscopy techniques

Spectroscopy Auger

Spectroscopy Auger electron

Spectroscopy techniques

Spectroscopy techniques Auger

Surface analytical techniques Auger electron spectroscopy

© 2024 chempedia.info