Salts, ammonium, reactions

Amines can displace a halide or a derivative of an alcohol, such as the methanesulfonate or toluene-4-sulfonate, with the eventual formation of a quaternary ammonium salt. Reaction with ammonia may lead to mixtures, since the initial alkylation increases the basicity of the nitrogen, and hence the primary amine reacts more rapidly than ammonia. Further reaction, although enhanced by the increase in basicity, may be impeded by steric hindrance arising from the additional alkyl groups. 

Phthalic anhydride reacts in situ with the hydroxyl groups of polyether polyols forming an half ester of phthalic acid. The formed acidic group neutralises the tertiary amine under the form of quaternary ammonium salt (reaction 13.33). 

Reactions Avith Inorganic Compounds. Hydrolysis and Reductioyi. When hexamethA-lenetet 1-amine is heated with strong acids in aqueous solutions hydrolysis takes place, Aiith liberation of formaldehyde and formation of ammonium salts. Reaction is practically quantitatiA e and may be used for hexamethAienetetramine analysis (page 297) ... 

By analogy, ammonium salts should behave as acids in liquid ammonia, since they produce the cation NH4 (the solvo-cation ), and soluble inorganic amides (for example KNHj, ionic) should act as bases. This idea is borne out by experiment ammonium salts in liquid ammonia react with certain metals and hydrogen is given off. The neutralisation of an ionic amide solution by a solution of an ammonium salt in liquid ammonia can be carried out and followed by an indicator or by the change in the potential of an electrode, just like the reaction of sodium hydroxide with hydrochloric acid in water. The only notable difference is that the salt formed in liquid ammonia is usually insoluble and therefore precipitates. 

Liquid ammonia, like water, is only a poor conductor of electricity. Ammonium salts dissolved in water behave as acids giving the ion NH4, whilst amides which give the ion NHj behave as bases. Thus the reaction ... 

If the acid of the ammonium salt is an oxidising agent, then on heating the salt, mutual oxidation and reduction occurs. The oxidation products can be nitrogen or one of its oxides and the reactions can be explosive, for example ... 

Aqueous solutions (when obtainable) give no reaction with ferric chloride. This is an important distinction from ammonium salts (sec above). Salicylamide, being also a phenol, is however an exception (p. 344). 

The reaction commences at about 120° the carbamic acid formed decomposes immediately into carbon dioxide and ammonia. The latter may form the ammonium salt with unreacted acid the ammonium salt also reacts with urea at temperatures above 120° to yield the amide ... 

This reaction is applicable to many aliphatic acids and their ammonium salts. 

Girard s reagent T is carbohydrazidomethyltrimethylammonium chloride (I) and is prepared by the reaction of the quaternary ammonium salt formed from ethyl chloroacetate and trimethylamine with hydrazine hydrate in alco-hoUc solution ... 

Amines are powerful nucleophiles which react under neutral or slightly basic conditions with several electron-accepting carbon reagents. The reaction of alkyl halides with amines is useful for the preparation of tertiary amines or quaternary ammonium salts. The conversion of primary amines into secondary amines is usually not feasible since the secondary amine tends towards further alkylation. 

The first step of the reaction involves the formation of the S-C bond with the elimination of a molecule of ammonium salt. The fact that it has been possible to isolate the acyclic intermediate (176), R = Me or Ph, would confirm this hypothesis, particularly when the reaction is carried out for a short time in the cold in ethereal solution (27, 82). These intermediates (176) can be cyclized quantitatively on standing or on being treated by hydrochloric acid. However, no evidence has been advanced concerning their structures. 

This property of quaternary ammonium salts is used to advantage m an experi mental technique known as phase transfer catalysis Imagine that you wish to carry out the reaction... 

Sodium cyanide does not dissolve m butyl bromide The two reactants contact each other only at the surface of the solid sodium cyanide and the rate of reaction under these con ditions IS too slow to be of synthetic value Dissolving the sodium cyanide m water is of little help because butyl bromide is not soluble m water and reaction can occur only at the interface between the two phases Adding a small amount of benzyltrimethyl ammonium chlonde however causes pentanemtnle to form rapidly even at room temper ature The quaternary ammonium salt is acting as a catalyst it increases the reaction rate How7... 

Quaternary ammonium salts catalyze the reaction between an anion and an organic substrate by transfemng the anion from the aqueous phase where it cannot contact the substrate to the organic phase In the example just cited the first step occurs m the... 

Quaternary ammonium salts as we have seen are useful m synthetic organic chem istry as phase transfer catalysts In another more direct application quaternary ammo mum hydroxides are used as substrates m an elimination reaction to form alkenes... 

In the Strecker synthesis an aldehyde is converted to an a ammo acid with one more carbon atom by a two stage procedure m which an a ammo nitrile is an mterme diate The a ammo nitrile is formed by reaction of the aldehyde with ammonia or an ammonium salt and a source of cyanide ion Hydrolysis of the nitrile group to a car boxylic acid function completes the synthesis... 

The diacid-diamine amidation described in reaction 2 in Table 5.4 has been widely studied in the melt, in solution, and in the solid state. When equal amounts of two functional groups are present, both the rate laws and the molecular weight distributions are given by the treatment of the preceding sections. The stoichiometric balance between reactive groups is readily obtained by precipitating the 1 1 ammonium salt from ethanol ... 

Historically these compounds have been made in two-step processes. Eor smaller volumes, reaction of an appropriate ketone or aldehyde with a cyanide salt followed by treatment with an ammonium salt proves satisfactory (Strecker synthesis). Eor larger volumes, treatment of the ketone or aldehyde with HCN to produce a cyanohydrin, followed by treatment with ammonia has been practiced. However, in 1990, DuPont began practicing a new one-step... 

Miscellaneous Reactions. Sodium bisulfite adds to acetaldehyde to form a white crystalline addition compound, insoluble in ethyl alcohol and ether. This bisulfite addition compound is frequendy used to isolate and purify acetaldehyde, which may be regenerated with dilute acid. Hydrocyanic acid adds to acetaldehyde in the presence of an alkaU catalyst to form cyanohydrin the cyanohydrin may also be prepared from sodium cyanide and the bisulfite addition compound. Acrylonittile [107-13-1] (qv) can be made from acetaldehyde and hydrocyanic acid by heating the cyanohydrin that is formed to 600—700°C (77). Alanine [302-72-7] can be prepared by the reaction of an ammonium salt and an alkaU metal cyanide with acetaldehyde this is a general method for the preparation of a-amino acids called the Strecker amino acids synthesis. Grignard reagents add readily to acetaldehyde, the final product being a secondary alcohol. Thioacetaldehyde [2765-04-0] is formed by reaction of acetaldehyde with hydrogen sulfide thioacetaldehyde polymerizes readily to the trimer. 

The reactions are catalyzed by tertiary amines, quaternary ammonium salts, metal salts, and basic ion-exchange resins. The products are difficult to purify and generally contain low concentrations of acryhc acid and some diester which should be kept to a minimum since its presence leads to product instabihty and to polymer cross-linking. 

Salt Formation. Salt-forming reactions of adipic acid are those typical of carboxylic acids. Alkali metal salts and ammonium salts are water soluble alkaline earth metal salts have limited solubiUty (see Table 5). Salt formation with amines and diamines is discussed in the next section. 

Phosphonomethylated Ethers. A phosphoms-containing ether of ceUulose can be prepared by the reaction of cotton ceUulose with chioromethylphosphonic acid [2565-58-4] ia the presence of sodium hydroxide [1310-73-2] by the pad-dry-cure technique (62). Phosphoms contents of between 0.2 and 4.0% are obtained. This finish is durable but has high ion-exchange properties and is flame resistant only as the ammonium salt. DurabUity on medium weight fabrics is obtained with chi oromethylph osph onic diamide. This finish has never penetrated the flame retardant market (63). 

Halex rates can also be increased by phase-transfer catalysts (PTC) with widely varying stmctures quaternary ammonium salts (51—53) 18-crown-6-ether (54) pytidinium salts (55) quaternary phosphonium salts (56) and poly(ethylene glycol)s (57). Catalytic quantities of cesium duoride also enhance Halex reactions (58). 

Basic Extractants. Only long-chain quaternary ammonium salts, R3NCH3 X , ia which R represents Cg—0 2 groups and X nitrate or thiocyanate, are effectively used for REE separations (see Quaternary ammonium compounds). The extractant reacts with REE according to an anion-exchange reaction ... 

The action of redox metal promoters with MEKP appears to be highly specific. Cobalt salts appear to be a unique component of commercial redox systems, although vanadium appears to provide similar activity with MEKP. Cobalt activity can be supplemented by potassium and 2inc naphthenates in systems requiring low cured resin color lithium and lead naphthenates also act in a similar role. Quaternary ammonium salts (14) and tertiary amines accelerate the reaction rate of redox catalyst systems. The tertiary amines form beneficial complexes with the cobalt promoters, faciUtating the transition to the lower oxidation state. Copper naphthenate exerts a unique influence over cure rate in redox systems and is used widely to delay cure and reduce exotherm development during the cross-linking reaction. 

These association reactions can be controlled. Acetone or acetonylacetone added to the solution of the polymeric electron acceptor prevents insolubilization, which takes place immediately upon the removal of the ketone. A second method of insolubiUzation control consists of blocking the carboxyl groups with inorganic cations, ie, the formation of the sodium or ammonium salt of poly(acryhc acid). Mixtures of poly(ethylene oxide) solutions with solutions of such salts can be precipitated by acidification. 

Protonic initiation is also the end result of a large number of other initiating systems. Strong acids are generated in situ by a variety of different chemistries (6). These include initiation by carbenium ions, eg, trityl or diazonium salts (151) by an electric current in the presence of a quartenary ammonium salt (152) by halonium, triaryl sulfonium, and triaryl selenonium salts with uv irradiation (153—155) by mercuric perchlorate, nitrosyl hexafluorophosphate, or nitryl hexafluorophosphate (156) and by interaction of free radicals with certain metal salts (157). Reports of "new" initiating systems are often the result of such secondary reactions. Other reports suggest standard polymerization processes with perhaps novel anions. These latter include (Tf)4Al (158) heteropoly acids, eg, tungstophosphate anion (159,160) transition-metal-based systems, eg, Pt (161) or rare earths (162) and numerous systems based on tri flic acid (158,163—166). Coordination polymerization of THF may be in a different class (167). 

Inositols, ie, hexaliydrobenzenehexols, are sugars that have received increasing study and are useful in the treatment of a wide variety of human disorders, including vascular disease, cancer, cirrhosis of the Hver, frostbite, and muscular dystrophy (269). Myoinositol esters prepared by reaction with lower fatty acid anhydrides are useful as Hver medicines and nonionic surfactants the aluminum and ammonium salts of inositol hexasulfate are useful anticancer agents (270). Tetraarjloxybenzoquinones are intermediates in the preparation of dioxazine dyes (266,271). The synthesis of hexakis(aryloxy)benzenes has also beenpubUshed (272). 

A continuous process has been described (14) which can produce either the amide or the nitrile by adjusting the reaction conditions. Boric acid has been used as a catalyst in the amidation of fatty acid (15). Other catalysts employed include alumina (16), titanium, and 2inc alkoxides (17). The difficulty of complete reaction during synthesis has been explained by the formation of RCOOH NH RCOO , a stable intermediate acid ammonium salt (18). 

---