Ammonium-electron

Co-ordinate bonds are formed by the sharing of electrons, both electrons being donated by the same atom. Thus the hydrogen ion, has no outer electrons whilst ammonia has eight, six shared with hydrogen atoms and one lone-pair. This lone-pair is donated to the hydrogen ion and the ammonium ion is formed ... 

Ammonia as a donor molecule. Because of the presence of the lone pair of electrons on the nitrogen atom, ammonia can behave as an electron pair donor. For example, ammonia abstracts a proton from a water molecule producing the tetrahedral ammonium, NH4, ion and forms the compounds HjN- AlClj and HjN- BClj. 

Towards a simple Lewis base, for example the proton, phosphine is a poorer electron donor than ammonia, the larger phosphorus atom being less able to form a stable covalent bond with the acceptor atom or molecule. Phosphine is, therefore, a much weaker base than ammonia and there is no series of phosphonium salts corresponding to the ammonium salts but phosphonium halides. PH4X (X = Cl, Br, I) can be prepared by the direct combination of phosphine with the appropriate hydrogen halide. These compounds are much more easily dissociated than ammonium halides, the most stable being the iodide, but even this dissociates at 333 K PH4I = PH3 -t- HI... 

Terminal alkynes are only reduced in the presence of proton donors, e.g. ammonium sulfate, because the acetylide anion does not take up further electrons. If, however, an internal C—C triple bond is to be hydrogenated without any reduction of terminal, it is advisable to add sodium amide to the alkyne solution Hrst. On catalytic hydrogenation the less hindered triple bonds are reduced first (N.A. Dobson, 1955, 1961). 

Amines are powerful nucleophiles which react under neutral or slightly basic conditions with several electron-accepting carbon reagents. The reaction of alkyl halides with amines is useful for the preparation of tertiary amines or quaternary ammonium salts. The conversion of primary amines into secondary amines is usually not feasible since the secondary amine tends towards further alkylation. 

Formal charges are based on Lewis structures m which electrons are considered to be shared equally between covalently bonded atoms Actually polarization of N—H bonds m ammonium ion and of B—H bonds m borohydride leads to some transfer of positive and negative charge respectively to the hydrogens... 

The electron counts of nitrogen in ammonium ion and boron in borohydride ion are both 4 (half of eight electrons in covalent bonds) Because a neutral nitrogen has five electrons in its valence shell an electron count of 4 gives it a formal charge of +1 A neutral boron has three valence electrons so that an electron count of 4 in borohydride ion corresponds to a formal charge of -1... 

In 1973 the Semiconductor Equipment and Materials Institute (SEMI) held its first standards meeting. SEMI standards are voluntary consensus specifications developed by the producers, users, and general interest groups in the semiconductor (qv) industry. Examples of electronic chemicals are glacial acetic acid [64-19-7] acetone [67-64-17, ammonium fluoride [12125-01 -8] and ammonium hydroxide [1336-21 -6] (see Ammonium compounds), dichloromethane [75-09-2] (see Cm.OROCARBONSANDcm.OROHYDROCARBONs), hydrofluoric acid [7664-39-3] (see Eluorine compounds, inorganic), 30% hydrogen peroxide (qv) [7722-84-1] methanol (qv) [67-56-1] nitric acid (qv) [7697-37-2] 2-propanoI [67-63-0] (see Propyl alcohols), sulfuric acid [7664-93-9] tetrachloroethane [127-18-4] toluene (qv) [108-88-3] and xylenes (qv) (see also Electronic materials). 

Synthetic manganese carbonate is made from a water-soluble Mn (IT) salt, usually the sulfate, by precipitation with an alkafl or ammonium carbonate. The desired degree of product purity determines the quaUty of manganese sulfate and the form of carbonate to be used. For electronic-grade material, where the content of K O and Na20 cannot exceed 0.1% each, the MnSO is specially prepared from manganese metal, and ammonium bicarbonate is used (26) (see Electronic materials). After precipitation, the MnCO is filtered, washed free of excess carbonate, and then, to avoid undesirable oxidation by O2, dried carefljlly at a maximum temperature of 120°C. 

About 264,000 metric tons of elemental capacity is available in North America, plus another 79,000 t (P equivalent) of purified wet phosphoric acid (14). About 85% of the elemental P is burned to P2 5 hydrated to phosphoric acid. Part of the acid (ca 21%) is used direcdy, but the biggest part is converted to phosphate compounds. Sodium phosphates account for 47% calcium, potassium, and ammonium phosphates account for 17%. Pinal apphcations include home laundry and automatic dishwasher detergents, industrial and institutional cleaners, food and beverages, metal cleaning and treatment, potable water and wastewater treatment, antifree2e, and electronics. The purified wet acid serves the same markets. 

These association reactions can be controlled. Acetone or acetonylacetone added to the solution of the polymeric electron acceptor prevents insolubilization, which takes place immediately upon the removal of the ketone. A second method of insolubiUzation control consists of blocking the carboxyl groups with inorganic cations, ie, the formation of the sodium or ammonium salt of poly(acryhc acid). Mixtures of poly(ethylene oxide) solutions with solutions of such salts can be precipitated by acidification. 

The anaerobic reaction of sulfur dioxide with aqueous ammonia produces a solution of ammonium sulfite [10192-30-0]. This reaction proceeds efficientiy, even with a gas stream containing as Httie as 1 wt % sulfur dioxide. The sulfur dioxide can be regenerated at a high concentration by acidulation or by stream stripping of the ammonium sulfite solution, or the sulfite can be made to precipitate and the ammonia recovered by addition of lime (243). The process can also be modified to produce ammonium sulfate for use as fertili2er (244) (see Fertilizers). In a variant of this process, the use of electron-beam radiation cataly2es the oxidation of sulfur dioxide in the presence of ammonia to form ammonium sulfate (245). 

Conversion of fused pentoxide to alloy additives is by far the largest use of vanadium compounds. Air-dried pentoxide, ammonium vanadate, and some fused pentoxide, representing ca 10% of primary vanadium production, are used as such, purified, or converted to other forms for catalytic, chemical, ceramic, or specialty appHcations. The dominant single use of vanadium chemicals is in catalysts (see Catalysis). Much less is consumed in ceramics and electronic gear, which are the other significant uses (see Batteries). Many of the numerous uses reported in the Hterature are speculative, proposed. 

It resembles tetracyanoethylene in that it adds reagents such as hydrogen (31), sulfurous acid (31), and tetrahydrofuran (32) to the ends of the conjugated system of carbon atoms suffers displacement of one or two cyano groups by nucleophilic reagents such as amines (33) or sodiomalononittile (34) forms TT-complexes with aromatic compounds (35) and takes an electron from iodide ion, copper, or tertiary amines to form an anion radical (35,36). The anion radical has been isolated as salts of the formula (TCNQ) where is a metal or ammonium cation, and n = 1, 1.5, or 2. Some of these salts have... 

Palladium and Palladium Alloys. Palladium is used in telephone equipment and in electronics appHcations as a substitute for gold in specific areas. Palladium is plated from ammoniacal and acid baths available along with chelated variations as proprietary processes. One typical alkaline bath uses 8 g/L diammine-dinitropalladium, 100 g/L ammonium nitrate, and 10 g/L sodium nitrite. The pH is adjusted to 9—10 using ammonium hydroxide, and the bath is operated at 100 A/m at 50° C. If ammonium sulfamate, 100 g/L, is used in some baths to replace the nitrate and sodium nitrite salts, the bath is mn at lower temperature, 25—35°C, and a pH of 7.5—8.5. A palladium—nickel alloy, 75% Pd, is plated from a bath having 6 g/L palladium from the same salt, 3 g/L nickel from nickel sulfamate concentrate, and 90 g/L ammonium hydroxide. The bath is operated at 20—40°C with 50-100 A/m/... 

Extension of this work by studying the reaction of 3-methyl-5-nitro-pyrimidin-4(3//)-one with -X-arylketones in the presence of ammonium acetate surprisingly revealed the formation of a mixture of 4-arylpyrimidines and 6-arylpyridin-2(l//)-ones (00JCS(P1)27). The ratio between pyridine and pyrimidine formation is dependent on the substituent X. With electron-donating substituents the formation of the pyridin-2(l//)-ones is favored, with electron-attracting substituents the formation of the pyrimidine derivatives (Scheme 21) In the formation of the 6-arylpyridin-2(l//)-ones the C-4- C-5-C-6 part of the pyrimidone-4 is the building block in the construction of the pyridine ring. Therefore, the pyrimidone can be considered as an activated o -nitroformylacetic acid (Scheme 21). 

A quaternary ammonium species 1, bearing an electron-withdrawing group Z a to the nitrogen center, can rearrange to a tertiary amine 3, when treated with a strong base. This reaction is known as the Stevens rearrangement. ... 

Mechanistically the rearrangement is formulated to proceed via an intermediate radical-pair or ion-pair. In either case the initial step is the formation of a nitrogen-ylide 2 by deprotonation of the ammonium species with a strong base. The abstraction of a proton from the a-carbon is facilitated by an electron-withdrawing group Z—e.g. an ester, keto or phenyl group ... 

---