Ammonia carbonyl compounds

Officially, the history of MCRs dates back to the year 1850, with the introduction of the Strecker reaction (S-3CR) describing the formation of a-aminocyanides from ammonia, carbonyl compounds, and hydrogen cyanide [4]. In 1882, the reaction progressed to the Hantzsch synthesis (H-4CR) of 1,4-dihydropyridines by the reaction of amines, aldehydes, and 1,3-dicarbonyl compounds [5], Some 25 years later, in 1917, Robinson achieved the total synthesis of the alkaloid tropinone by using a three-component strategy based on Mannich-type reactions (M-3CR) [6]. In fact, this was the earliest application of MCRs in natural product synthesis [7]. 

Ugi and Domling have shown that the U-4CR can also be combined with other MCRs, thus creating sequences which involve up to nine different substrates [33]. An example of such an approach is the combination of an Ugi-4CR with the as-yet not mentioned Asinger reaction (A-3CR or A-4CR). The latter allows the formation of thiazolines from ammonia, carbonyl compounds and sulfides [34]. As shown in Scheme 9.7, a mixture of a-bromoisobutyraldehyde, isobutyraldehyde, sodium hy-drogensulfide and ammonia yields the imine 9-38 which, by reaction with t-butyl-isocyanide, methanol, and C02, led to the final product 9-39 [35]. 

One of the very first methods for the preparation of a-aminophosphonic acids appears to be the one described by Kabachnik and Medved [8]. The Kabachnik-Fields reaction is still very useful, especially for the preparation of dialkyl 1-aminoalkanephosphonates. According to this method, a-aminophosphonates were obtained reacting ammonia, carbonyl compounds (aldehydes and ketones), and dialkyl H-phosphonate. A little later. Fields [9] presented a method of synthesis of 1-aminoalkylphosphonic acids by replacing ammonia with amine—reacting both (aldehydes and ketones) with ammonia, or amine and dialkyl H-phosphonate to give dialkyl esters of 1-aminoalkylphosphonic acid (see Appendix). Hydrolysis of the esters produced free aminoalkylphosphonic acids. Yields of aminophosphonates vary from 40 to 47%. 

Since Kabachnik and Medved found that a-hydroxyalkylphosphonates are present in the reaction mixture of ammonia, carbonyl compound, and dialkyl H-phosphonate, they accepted that the reaction proceeds via formation of a-hydioxyalkylphosphonate followed... 

The reaction between sodium acetylide in liquid ammonia solution and carbonyl compounds gives a-acetylenyl carbinols (compare Section 111,148), for example ... 

Ammonia and amines undergo conjugate addition to a 3 unsaturated carbonyl compounds (Section 18 12) On the basis of this information predict the pnncipal organic product of each of the following reactions... 

Acetaldehyde can be isolated and identified by the characteristic melting points of the crystalline compounds formed with hydrazines, semicarbazides, etc these derivatives of aldehydes can be separated by paper and column chromatography (104,113). Acetaldehyde has been separated quantitatively from other carbonyl compounds on an ion-exchange resin in the bisulfite form the aldehyde is then eluted from the column with a solution of sodium chloride (114). In larger quantities, acetaldehyde may be isolated by passing the vapor into ether, then saturating with dry ammonia acetaldehyde—ammonia crystallizes from the solution. Reactions with bisulfite, hydrazines, oximes, semicarb azides, and 5,5-dimethyl-1,3-cyclohexanedione [126-81 -8] (dimedone) have also been used to isolate acetaldehyde from various solutions. 

Ethynylation. Base-catalyzed addition of acetylene to carbonyl compounds to form -yn-ols and -yn-glycols (see Acetylene-DERIVED chemicals) is a general and versatile reaction for the production of many commercially useful products. Finely divided KOH can be used in organic solvents or Hquid ammonia. The latter system is widely used for the production of pharmaceuticals and perfumes. The primary commercial appHcation of ethynylation is in the production of 2-butyne-l,4-diol from acetylene and formaldehyde using supported copper acetyHde as catalyst in an aqueous Hquid-fiHed system. 

Schiff bases, also known as imines, ate formed by the condensation of carbonyl compounds with ammonia or primary amines. Hydrogenation of the resulting Schiff bases forms amines, such as benzylamine and dibenzylamine. 

If, however, hydrogen is present in the a-position of the iV-alkyl substituent, 2-alkyl-oxaziridines are easily decomposed by alkali. Base attack on this H atom effects 1,2-elimination at the C—N bond. From (86) and aldimine (87) forms, and a mixture of ammonia and two carbonyl compounds is finally obtained, one of them containing the carbon atom of the original oxaziridine ring, the other originating from the IV-alkyl group (57JA5739). 

Two substituents on two N atoms increase the number of diaziridine structures as compared with oxaziridines, while some limitations as to the nature of substituents on N and C decrease it. Favored starting materials are formaldehyde, aliphatic aldehydes and ketones, together with ammonia and simple aliphatic amines. Aromatic amines do not react. Suitable aminating agents are chloramine, N-chloroalkylamines, hydroxylamine-O-sulfonic acid and their simple alkyl derivatives, but also oxaziridines unsubstituted at nitrogen. Combination of a carbonyl compound, an amine and an aminating agent leads to the standard procedures of diaziridine synthesis. 

Despite the increasing information on the photochemistry of 2,4-dienones and other unsaturated ketones, as well as on the ring-chain valence isomerism of halogen-substituted pyran and dihydi opyran systems,the data are still very scarce. The intermediate formation of pyrans valence-isomeric with unsaturated carbonyl compounds in the pyridine syntheses based on reactions of ammonia with aldehydes or ketones, advocated by various authors (cf. Section II,B,2,f), is still rather speculative. (See also Section II,B,2,e for the valence isomerism of 5-chloro-2,4-dienones with pyrylium chlorides.)... 

Reactions in liquid ammonia (cf. Chapter 3, Section III) require a certain amount of care, since the solvent is low boiling (—33 ) and its fumes are noxious. Nevertheless, with reasonable caution, the preparation of an ammonia solution of sodium acetylide can be carried out as described. The reagent so prepared can then be directly used for displacements on alkyl halides or for additions to suitable carbonyl compounds. Examples of both reactions are given. 

Reductive cleavage of phenylhydrazones of carbonyl compounds provides a route to amines. The reduction is carried out conveniently in ethanol containing ammonia over palladium-on-carbon. Ammonia is used to minimize formation of secondary amines, derived by addition of the initially formed amine to the starting material (160). Alternatively, a two-phase system of benzene, cyclohexane, toluene, or dioxane and aqueous hydrochloric acid can be used. 

D. Caine, Reduction and related reaction of a, ji-unsaturated carbonyl compounds with metals in liquid ammonia. Organic Reaktions, Vol. XXIII, 1 (1976). 

Besides direct reduction, a one-pot reductive amination of aldehydes and ketones with a-picoline-borane in methanol, in water, and in neat conditions gives the corresponding amine products (Scheme 8.2).40 The synthesis of primary amines can be performed via the reductive amination of the corresponding carbonyl compounds with aqueous ammonia with soluble Rh-catalyst (Eq. 8.17).41 Up to an 86% yield and a 97% selectivity for benzylamines were obtained for the reaction of various benzaldehydes. The use of a bimetallic catalyst based on Rh/Ir is preferable for aliphatic aldehydes. 

Ammonia itself yields imines, R2C=NH, with carbonyl compounds but these derivatives are unstable and react with each other to form polymers of varying size. The classical aldehyde ammonias are found to be hydrated cyclic trimers, but from aldehydes carrying powerfully electron-withdrawing substituents it is possible to isolate the simple ammonia adduct [73, cf. (72), and hydrates, p. 208, hemi-acetals,... 

The solvent process involves treating phthalonitrile with any one of a number of copper salts in the presence of a solvent at 120 to 220°C [10]. Copper(I)chloride is most important. The list of suitable solvents is headed by those with a boiling point above 180°C, such as trichlorobenzene, nitrobenzene, naphthalene, and kerosene. A metallic catalyst such as molybdenum oxide or ammonium molybdate may be added to enhance the yield, to shorten the reaction time, and to reduce the necessary temperature. Other suitable catalysts are carbonyl compounds of molybdenum, titanium, or iron. The process may be accelerated by adding ammonia, urea, or tertiary organic bases such as pyridine or quinoline. As a result of improved temperature maintenance and better reaction control, the solvent method affords yields of 95% and more, even on a commercial scale. There is a certain disadvantage to the fact that the solvent reaction requires considerably more time than dry methods. 

During the first month of this experiment, it was realized that this reaction is extremely variable. Thus, diverse amines (ammonia, primary and secondary amines, hydrazine derivatives, hydroxylamines) 13, carbonyl compounds (aldehydes, ketones) 14, acid components 15 or their anions (H2O, Na2S203, H2Se, R2NH, RHN-CN, HN3, HNCO, HNCS, RCO2H, RCOSH, ROCO2H, etc.), and the isocyanides could form the a-adducts 16 that rearrange into their products 17 (Scheme 1.5). 

A somewhat more complex mechanism takes place with other H-atom donors, such as primary and secondary alcohols, either added to the liquid ammonia solution or used as the solvent (Andrieux et al., 1987). Instead of being totally reduced, the hydroxyalkyl radical, resulting from the H-atom abstraction from the alcohol, partly deprotonates, generating the anion radical of the parent carbonyl compound. The latter is then generated by... 

---