Carbonyl compounds reaction with ammonia

Unlike amidines, the multicomponent reaction of a,(3-unsaturated ketones 96 (aliphatic [94] or aromatic [95, 96]) with carbonyl compounds 97 and ammonia, which are the synthetic precursors of amidines, yielded 1,2,5,6-tetrahydropyrimidines 98 instead of dihydroheterocycles. When R3 is not the same as R4 tetrahydropyrimidines 98 were mixtures of diastereomers A and B, in which the relative configurations of stereogenic centers were also established [95, 96]. In contrast to conventional mechanical shaking requiring about 48 h [95], sonicated reactions were completed within 90 min at room temperature and provided the target heterocycles in high yields and purities [96]. Ultrasonic irradiation also significantly expanded the possibilities of such three-component reactions (Scheme 3.29). 

A variation of this procedure was introduced by Tota and Elderfield (248), who described a general synthesis for 2,3-disubstituted and 2,3,6-trisubstituted 5-hydroxypyrazines. In this reaction an a-(bromoacetylainino) carbonyl compound (17) [prepared from an a-amino carbonyl compound (15) with a bromoacetyl bromide (16)] was treated with alcoholic ammonia to give the corresponding pyrazine (18). The reaction is discussed in more detail in Section 7. 

The polymeric material from the plain caramel is generated from the condensation reactions of the aldehydes and ketones formed by heating the sugar with bases or acids. The ammonia caramel is formed in a Maillard type reaction [2] where carbonyl compounds react with amino groups or ammonia. This type of compound will be further presented in Sections 11.2 and 11.3. Sulfite caramel is also a Maillard type polymer. However, as hydrogen sulfites form stable adducts with aldehydes and ketones, the sulfite caramels include in their structure sulfite groups. 

Acetaldehyde can be isolated and identified by the characteristic melting points of the crystalline compounds formed with hydrazines, semicarbazides, etc these derivatives of aldehydes can be separated by paper and column chromatography (104,113). Acetaldehyde has been separated quantitatively from other carbonyl compounds on an ion-exchange resin in the bisulfite form the aldehyde is then eluted from the column with a solution of sodium chloride (114). In larger quantities, acetaldehyde may be isolated by passing the vapor into ether, then saturating with dry ammonia acetaldehyde—ammonia crystallizes from the solution. Reactions with bisulfite, hydrazines, oximes, semicarb azides, and 5,5-dimethyl-1,3-cyclohexanedione [126-81 -8] (dimedone) have also been used to isolate acetaldehyde from various solutions. 

Cellobiose was prepared first by Skraup and Konig by the saponification of the octaacetate with alcoholic potassium hydroxide, and the method was improved by Pringsheim and Merkatz.3 Aqueous barium hydroxide also has been employed for the purpose, and methyl alcoholic ammonia has been used extensively for the hydrolysis of carbohydrate acetates. The method of catalytic hydrolysis with a small quantity of sodium methylate was introduced by Zemplen,i who considered the action to be due to the addition of the reagent to the ester-carbonyl groups of the sugar acetate and the decomposition of the addition compound by reaction with alcohol. The present procedure, reported by Zemplen, Gerecs, and Hadacsy, is a considerable improvement over the original method (see Note 2). 

Despite the increasing information on the photochemistry of 2,4-dienones and other unsaturated ketones, as well as on the ring-chain valence isomerism of halogen-substituted pyran and dihydi opyran systems,the data are still very scarce. The intermediate formation of pyrans valence-isomeric with unsaturated carbonyl compounds in the pyridine syntheses based on reactions of ammonia with aldehydes or ketones, advocated by various authors (cf. Section II,B,2,f), is still rather speculative. (See also Section II,B,2,e for the valence isomerism of 5-chloro-2,4-dienones with pyrylium chlorides.)... 

Reactions in liquid ammonia (cf. Chapter 3, Section III) require a certain amount of care, since the solvent is low boiling (—33 ) and its fumes are noxious. Nevertheless, with reasonable caution, the preparation of an ammonia solution of sodium acetylide can be carried out as described. The reagent so prepared can then be directly used for displacements on alkyl halides or for additions to suitable carbonyl compounds. Examples of both reactions are given. 

D. Caine, Reduction and related reaction of a, ji-unsaturated carbonyl compounds with metals in liquid ammonia. Organic Reaktions, Vol. XXIII, 1 (1976). 

Besides direct reduction, a one-pot reductive amination of aldehydes and ketones with a-picoline-borane in methanol, in water, and in neat conditions gives the corresponding amine products (Scheme 8.2).40 The synthesis of primary amines can be performed via the reductive amination of the corresponding carbonyl compounds with aqueous ammonia with soluble Rh-catalyst (Eq. 8.17).41 Up to an 86% yield and a 97% selectivity for benzylamines were obtained for the reaction of various benzaldehydes. The use of a bimetallic catalyst based on Rh/Ir is preferable for aliphatic aldehydes. 

Officially, the history of MCRs dates back to the year 1850, with the introduction of the Strecker reaction (S-3CR) describing the formation of a-aminocyanides from ammonia, carbonyl compounds, and hydrogen cyanide [4]. In 1882, the reaction progressed to the Hantzsch synthesis (H-4CR) of 1,4-dihydropyridines by the reaction of amines, aldehydes, and 1,3-dicarbonyl compounds [5], Some 25 years later, in 1917, Robinson achieved the total synthesis of the alkaloid tropinone by using a three-component strategy based on Mannich-type reactions (M-3CR) [6]. In fact, this was the earliest application of MCRs in natural product synthesis [7]. 

Ugi and Domling have shown that the U-4CR can also be combined with other MCRs, thus creating sequences which involve up to nine different substrates [33]. An example of such an approach is the combination of an Ugi-4CR with the as-yet not mentioned Asinger reaction (A-3CR or A-4CR). The latter allows the formation of thiazolines from ammonia, carbonyl compounds and sulfides [34]. As shown in Scheme 9.7, a mixture of a-bromoisobutyraldehyde, isobutyraldehyde, sodium hy-drogensulfide and ammonia yields the imine 9-38 which, by reaction with t-butyl-isocyanide, methanol, and C02, led to the final product 9-39 [35]. 

The solvent process involves treating phthalonitrile with any one of a number of copper salts in the presence of a solvent at 120 to 220°C [10]. Copper(I)chloride is most important. The list of suitable solvents is headed by those with a boiling point above 180°C, such as trichlorobenzene, nitrobenzene, naphthalene, and kerosene. A metallic catalyst such as molybdenum oxide or ammonium molybdate may be added to enhance the yield, to shorten the reaction time, and to reduce the necessary temperature. Other suitable catalysts are carbonyl compounds of molybdenum, titanium, or iron. The process may be accelerated by adding ammonia, urea, or tertiary organic bases such as pyridine or quinoline. As a result of improved temperature maintenance and better reaction control, the solvent method affords yields of 95% and more, even on a commercial scale. There is a certain disadvantage to the fact that the solvent reaction requires considerably more time than dry methods. 

A nice example of the chemical similarity between imines and carbonyl compounds is the Strecker synthesis of amino acids. This involves reaction of an aldehyde with ammonia and HCN (usually in the form of ammonium chloride plus KCN) to give an intermediate a-aminonitrile. Hydrolysis of the a-aminonitrile then produces the a-amino acid. 

---