Amines acidic conditions

This reaction proceeds via an Siprimary alkyl halides. It can be performed with secondary alkyl halides in many cases, but tertiary alkyl halides cannot be used. Acid-catalyzed or base-catalyzed hydrolysis is then performed to release the amine. Acidic conditions are more common than basic conditions. 

We chose benzyli dene acetone (4.39, Scheme 4.11) as a model dienophile for our studies. The uncatalysed Diels-Alder reaction of this compound with cyclopentadiene is slow, justifying a catalytic approach. Reaction of 4.39 with paraformaldehyde and dimethyl amine under acidic conditions in an aqueous ethanol solution, following a literature procedure, produced the HCl salt of 4.42 (Scheme 4.11). The dienophile was liberated in situ by adding one equivalent of base. 

Methylamines are formed by heating formaldehyde with primary or secondary amines or their salts under acid conditions (61) ... 

The higher aUphatic amine oxides are commercially important because of their surfactant properties and are used extensively in detergents. Amine oxides that have surface-acting properties can be further categorized as nonionic surfactants however, because under acidic conditions they become protonated and show cationic properties, they have also been called cationic surfactants. Typical commercial amine oxides include the types shown in Table 1. 

Metal Catalysis. Aqueous solutions of amine oxides are unstable in the presence of mild steel and thermal decomposition to secondary amines and aldehydes under acidic conditions occurs (24,25). The reaction proceeds by a free-radical mechanism (26). The decomposition is also cataly2ed by V(III) and Cu(I). 

Ritter Reaction (Method 4). A small but important class of amines are manufactured by the Ritter reaction. These are the amines in which the nitrogen atom is adjacent to a tertiary alkyl group. In the Ritter reaction a substituted olefin such as isobutylene reacts with hydrogen cyanide under acidic conditions (12). The resulting formamide is then hydroly2ed to the parent primary amine. Typically sulfuric acid is used in this transformation of an olefin to an amine. Stoichiometric quantities of sulfate salts are produced along with the desired amine. 

Formaldehyde may react with the active hydrogens on both the urea and amine groups and therefore the polymer is probably highly branched. The amount of formaldehyde (2—4 mol per 1 mol urea), the amount and kind of polyamine (10—15%), and resin concentration are variable and hundreds of patents have been issued throughout the world. Generally, the urea, formaldehyde, polyamine, and water react at 80—100°C. The reaction may be carried out in two steps with an initial methylolation at alkaline pH, followed by condensation to the desired degree at acidic pH, or the entire reaction may be carried out under acidic conditions (63). The product is generally a symp with 25—35% soHds and is stable for up to three months. 

Inhibition of Nitrosamine Formation. Nitrites can react with secondary amines and A/-substituted amides under the acidic conditions of the stomach to form /V-nitrosamines and A/-nitrosamides. These compounds are collectively called N-nitroso compounds. There is strong circumstantial evidence that in vivo A/-nitroso compounds production contributes to the etiology of cancer of the stomach (135,136), esophagus (136,137), and nasopharynx (136,138). Ascorbic acid consumption is negatively correlated with the incidence of these cancers, due to ascorbic acid inhibition of in vivo A/-nitroso compound formation (139). The concentration of A/-nitroso compounds formed in the stomach depends on the nitrate and nitrite intake. 

Basic Orange 1 (130) (aniline coupled to 2,4-diamiaotoluene) and Basic Orange 2 (22) (aniline coupled to y -phenylenediamiae) are examples of amine salt type cationic azo dyes. The cation is formed by protonation under acidic conditions. Under neutral or alkaline conditions, these dyes behave more like disperse dyes. In 1988 the U.S. production of Cl Basic Orange 2 amounted to 132 tons. 

Coe et al. reported an efficient modification for the preparation of /-substituted indole analogs for biology screening in good yield. The intermediate P-nitrostyrene 44, prepared from the condensation of 43 with DMFDMA, underwent methanolysis and reduction to provide the aniline acetal intermediate 45. Alkylation of amine 45 was carried out employing standard conditions of reductive alkylation to provide A-alkyl analogs represented by 46. The indole 47 was generated by formation of the oxonium ion (from 46) under acidic conditions, followed by cyclization, accompanied by loss of methanol. 

Stevens reported an interesting variation in which the amine and the aldehydes were linked by a tether. Combining bisacetalamine 79 with 76 under acidic conditions generated the single diastereomer 80. This tricyclic species was then converted into the ladybug defense alkaloid precoccinelline 81. 

The Pictet-Spengler condensation has been of vital importance in the synthesis of numerous P-carboline and isoquinoline compounds in addition to its use in the formation of alkaloid natural products of complex structure. A tandem retro-aldol and Pictet-Spengler sequence was utilized in a concise and enantioselective synthesis of 18-pseudoyohimbone. Amine 49 cyclized under acidic conditions to give the condensation product 50 in good yield. Deprotection of the ketone produced the indole alkaloid 51. 

In another example reaction of aldehyde 22 and amine 23 gave imine 24 which cyclised under strongly acidic conditions to yield the corresponding isoquinoline 25 in good yields It is interesting that the aldehyde portion 22 is not benzaldehyde derived. 

Tosylation of secondary amine 48 gave desired precursor 49 which was cyclised under prolonged acidic conditions to yield a mixture of linear and angular fully unsaturated isoquinolines 50 and 51. ... 

Dichloro-l,3,5-triazanaphthalene and its 6-methyl derivative react at the 4-position (70-90% yields) with ammonia in dioxane (20°, 15 min) or in water (95°, 1.5 hr) and with diethylamine in dioxane (20°, 15 min). The dichloroazine yields the 4-(A-ethyl-anilino)-2-chloro derivative under acidic conditions. Amination of the 2,4-dithioxo derivative with concentrated ammonia (95°,... 

Tlie isolable dithiiranes (4 and 7) are fairly stable under acidic conditions but quickly lose a sulfur atom to give the corresponding thioketones under basic conditions (97BCJ509). Tliey are quite sensitive toward amines and phosphines. Oxidation with MCPBA gave the corresponding dithiirane 1-oxides in high yields. 

Upon heating with a mixture of concentrated hydrochloric acid and ethanol under reflux, the hexaminium salt 4 is cleaved into the primary amine and formaldehyde. The latter can further react with ethanol under the acidic conditions to give formaldehyde diethylacetal ... 

The benzazepines, veri 1 opam (79) and anilopam (81), for example, represent significant departures from the above generalization. Construction of the former starts with the alkylation of veratrylamine (74) with the dimethyl acetal of bromoacetaldehyde to give the secondary amine 7, Cyclization under acidic conditions leads to the benzazepine... 

The cationic polymerization of cardanol under acidic conditions has been referred to earlier [170,171], NMR studies [16] indicated a carbonium ion initiated mechanism for oligomerization. PCP was found to be highly reactive with aldehydes, amines, and isocyates. Highly insoluble and infusible thermoset products could be obtained. Hexamine-cured PCP showed much superior thermal stability (Fig. 12) at temperatures above 500°C to that of the unmodified cardanol-formaldehyde resins. However, it was definitely inferior to phenolic resins at all temperatures. The difference in thermal stability between phenolic and PCP resins could be understood from the presence of the libile hydrocarbon segment in PCP. 

Boilers and steam systems Steel steam lines can be inhibited by the use of a volatile amine-based inhibitor such as ammonia, morpholine or cyclohexylamine introduced with the feedwater. It passes through the boiler and into the steam system, where it neutralizes the acidic conditions in pipework. The inhibitor is chemically consumed and lost by physical means. Film-forming inhibitors such as heterocyclic amines and alkyl sulphonates must be present at levels sufficient to cover the entire steel surface, otherwise localized corrosion will occur on the bare steel. Inhibitor selection must take into account the presence of other materials in the system. Some amine products cause corrosion of copper. If copper is present and at risk of corrosion it can be inhibited by the addition of benzotriazole or tolutriazole at a level appropriate to the system (see also Section 53.3.2). 

For resistance to acid conditions alone, traditional filled and unfilled bituminous solutions (which have economic advantages), chlorinated rubber and shellac have been used. Crosslinking coatings, e.g. amine-cured epoxy resins, often blended with coal-tar which develops resistance to oils and solvents, have obvious advantages on chemical plant. 

The high reactivity of heterocyclic diazonium ions in azo coupling reactions is the reason why in some cases the primary diazotization products cannot be isolated. For example, diazotization of 2-methyl-5-aminotetrazole (2.14) directly yields the triazene 2.15, i. e., the N-coupling product, since the intermediate diazonium ion is reactive enough to give the N-coupling product with the parent amine even under strongly acidic conditions (Scheme 2-8 Butler and Scott, 1967). 

In Section 3.4 we discussed the problem of reversibility of diazotization of aromatic and heteroaromatic amines. Simple stoichiometric considerations indicate that the reverse reaction (ArNJ -> ArNH2) may take place under strongly acidic conditions. Experimentally the reverse reaction was found only with heteroaromatic diazonium salts (Kavalek et al., 1989). Reaction conditions of hydroxy-de-diazonia-tion are comparable to those used for the reverse reactions of diazotization (e.g., 10 m H2S04, but at 0°C for the formation of 2-amino-5-phenyl-l,3,4-thiadiazol from the corresponding diazonium salt, Kavalek et al., 1979). So far as we know, however, amines have never been detected in aromatic hydroxy-de-diazoniations, not even in small amounts. 

Bromo-4-chloro-lH-pyrazolo[3,4-d]pyrimidine could be easily fimc-tionalized at C-3 and C-4 in a one-pot two-step microwave-assisted process (Scheme 34) [55]. Ding and Schultz reported that nucleophilic substitution of the addition-elimination type at the C-4 position with amines and anilines smoothly occurred under acidic conditions in dioxane upon irradiation... 

Alternatively, another base, such as H2O or OH , can substitute for the second molecule of amine. With some substrates and under some conditions, especially at low pH, the breakdown of 113 can become rate determining. The reaction also takes place under acidic conditions and is general acid catalyzed, so that breakdown of 113 is rate determining and proceeds as follows ... 

There are actually three reactions called by the name Schmidt reaction, involving the addition of hydrazoic acid to carboxylic acids, aldehydes and ketones, and alcohols and alkenes. The most common is the reaction with carboxylic acids, illustrated above.Sulfuric acid is the most common catalyst, but Lewis acids have also been used. Good results are obtained for aliphatic R, especially for long chains. When R is aryl, the yields are variable, being best for sterically hindered compounds like mesi-toic acid. This method has the advantage over 18-13 and 18-14 that it is just one laboratory step from the acid to the amine, but conditions are more drastic. Under the acid conditions employed, the isocyanate is virtually never isolated. 

Symmetrical N, N -disubstituted imidazolium salts are usually obtained by addition of paraformaldehyde on a bis-imine of glyoxal under acidic conditions. A one-pot procedure has been developed. Several enantiomerically pure amines were used to prepare the corresponding symmetrical salts 6 (Scheme 4) [12,13]. 

---