Amines a-substituted

A compound with a carbon-nitrogen double bond, formed by the reaction of a ketone or aldehyde with a primary amine. A substituted imine is often called a Schiff base. (p. 850)... 

In the case of tribenzyl and trimethyl amine, a-substitution products could be obtained using diethyl malonate or diethylphosphonate as nucleophiles, if 2,4,6-collidine was used as base in an acetonitrile electrolyte [20]. In this way, dialkyl aminomethyl phosphonates and malonates could be obtained in good yield. 

Aziridines unsubstituted on the N-atom behave like secondary amines A-substituted aziridines behave like tertiary amines. They react with acids to give aziridinium salts ... 

For certain substituted amines, a higher temperature (e.g., boding 40-60 per cent, sulphuric acid) is necessary to decompose the diazonium salt completely, for example ... 

Derivatives with 3-nitrophthalic anhydride. 3-Nitrophthalic anhydride reacts with primary and secondary amines to yield nitro-phthalamic acids it does not react with tertiary amines. The phthalamic acid derived from a primary amine undergoes dehydration when heated to 145° to give a neutral A -substituted 3-nitrophthalimide. The phthalamic acid from a secondary amine is stable to heat and is, of course, soluble in alkali. The reagent therefore provides a method for distinguishing and separating a mixture of primary and secondary amines. 

Benzenesulphonyl chloride reacts with primary and secondary, but not with tertiary, amines to yield substituted sulphonamides (for full discussion, see Section IV,100,3). The substituted sulphonamide formed from a primary amine dissolves in the alkaline medium, whilst that produced from a secondary amine is insoluble in alkali tertiary amines do not react. Upon acidifying the solution produced with a primary amine, the substituted sulphonamide is precipitated. The reactions form the basis of the Hinsberg procedure for the separation of amines see Section IV,100,(viii) for details. Feebly basic amines, such as o-nitroaniline, react slowly in the presence of allcali in such cases it is best to carry out the reaction in pyridine solution see Section IV,100,3. ... 

Hydrolysis of a substituted amide. A. With 10 per cent, sulphuric acid. Reflux 1 g. of the compound (e.g., acetanilide) with 20 ml. of 10 per cent, sulphuric acid for 1-2 hours. Distil the reaction mixture and collect 10 ml. of distillate this will contain any volatile organic acids which may be present. Cool the residue, render it alkaline with 20 per cent, sodium hydroxide solution, cool, and extract with ether. Distil off the ether and examine the ether-soluble residue for an amine. 

Now, contrary to popular opinions, this method need not be conducted in a sealed pipe bomb. Secondary amination by substitution is as much a reaction of opportunity as it is of brute force and heat. In fact, heating can tend to cause the reformation of safrole and isosafrole. So the simplest way to do this would be to use 500mL of ammonium hydroxide or alcoholic ammonia or, for those wishing to make MDMA or meth, 40% aqueous methylamine or alcoholic methylamine (to tell you the truth, methylamine is preferable in this method because it is more reactive that ammonia so yield will increase). This 500mL is placed in a flask and into it is poured a solution of 35g bromosafrole (30g phenylisopropyl-bromide) mixed with 50mL methanol. The flask is stoppered and stirred at room temperature for anywhere from 3 to 7 days. The chemist could also reflux the same mixture for 6-12 hours or she could throw the whole mix into a sealed pipe bomb (see How to Make section) and cook it for 5 hours in a 120-130°C oil bath. 

Focants of substituents of symmetrically substituted derivatives of symmetrical amines are distinguished by primes or else the names of the complete substituted radicals are enclosed in parentheses. Unsymmetrically substituted derivatives are named similarly or as A-substituted products of a primary amine (after choosing the most senior of the radicals to be the parent amine). For example. 

The amine group of 3-arninoben2otrifluoride can be replaced by Cl, Br, I, F, CN, or OH groups by standard dia2oti2ation reactions. Phosgenation gives 3-trifluoromethylphenyhsocyanate [329-01-1/, which can then be converted to the selective herbicide fluometuron [2164-17-2] a substituted urea. Application. 

The presence of ammonia and hydrogen peroxide in permanent hair color products is a disadvantage. Both are considered by consumers to be harsh chemicals. The odor of ammonia is unpleasant for a personal care product. Monoethanol amine has been used as a substitute for ammonia in some commercial permanent hair color products. It is not as effective as ammonia in allowing the hair to be lightened but it does not have as strong an odor. 

This reaction can also be utili2ed to prepare functionali2ed initiators by reaction of butyUithium with a substituted 1,1-diphenylethylene derivative. For example, polymers end functionali2ed with primary amine, tertiary amine, phenol, and bis(phenol) groups have been prepared in essentiaUy quantitative yield by using the reaction of butyUithium with the corresponding substituted (or protected) 1,1-diphenylethylene (87). 

Industrially, polyurethane flexible foam manufacturers combine a version of the carbamate-forming reaction and the amine—isocyanate reaction to provide both density reduction and elastic modulus increases. The overall scheme involves the reaction of one mole of water with one mole of isocyanate to produce a carbamic acid intermediate. The carbamic acid intermediate spontaneously loses carbon dioxide to yield a primary amine which reacts with a second mole of isocyanate to yield a substituted urea. 

Preparation of Amines. Amines are prepared by heating aUphatic, aromatic, or cycHc ketones with ammonium formate, formamide, or an A/-substituted ammonium formate at 165—190°C (Leuckart reaction). For example, cx-methylbenzylamine is prepared by the reaction of acetophenone with ammonium formate. 

The yellow members of this pigment class are obtained by coupling a dia2oti2ed aminoben2oic acid with a bisacetoacetaryUde, followed by conversion to a diacid chloride and reaction with a substituted aromatic amine. An example is Pigment Yellow 93 [5580-57-4] (Fig. 2b). 

Ritter Reaction (Method 4). A small but important class of amines are manufactured by the Ritter reaction. These are the amines in which the nitrogen atom is adjacent to a tertiary alkyl group. In the Ritter reaction a substituted olefin such as isobutylene reacts with hydrogen cyanide under acidic conditions (12). The resulting formamide is then hydroly2ed to the parent primary amine. Typically sulfuric acid is used in this transformation of an olefin to an amine. Stoichiometric quantities of sulfate salts are produced along with the desired amine. 

Inhibition of Nitrosamine Formation. Nitrites can react with secondary amines and A/-substituted amides under the acidic conditions of the stomach to form /V-nitrosamines and A/-nitrosamides. These compounds are collectively called N-nitroso compounds. There is strong circumstantial evidence that in vivo A/-nitroso compounds production contributes to the etiology of cancer of the stomach (135,136), esophagus (136,137), and nasopharynx (136,138). Ascorbic acid consumption is negatively correlated with the incidence of these cancers, due to ascorbic acid inhibition of in vivo A/-nitroso compound formation (139). The concentration of A/-nitroso compounds formed in the stomach depends on the nitrate and nitrite intake. 

Formation of Amines. Mono-, di-, and triaEyl amines are prepared by reaction with ammonia. The ratio of reagents determines product distribution with sufficient time and excess of aEyl chloride, tetraaEylammonium chloride [13107-10-3] and triallylamine [102-70-5] predominate. Mixed amines are prepared in similar fashion by using a substituted amine in place of ammonia they may also be prepared with allylamine [107-11-9] and a suitable organic chloride. 

Reaction of cyanohydrins with absolute ethanol in the presence of HCl yields the ethyl esters of a-hydroxy acids (3). A/-substituted amides can be synthesized by heating a cyanohydrin and an amine in water. Thus formaldehyde cyanohydrin and P-hydroxyethylamine lead to A/- (P-hydroxyethyl)hydroxyacetamide (4). 

Hydroxyl Group. The OH group of cyanohydrins is subject to displacement with other electronegative groups. Cyanohydrins react with ammonia to yield amino nitriles. This is a step in the Strecker synthesis of amino acids. A one-step synthesis of a-amino acids involves treatment of cyanohydrins with ammonia and ammonium carbonate under pressure. Thus acetone cyanohydrin, when heated at 160°C with ammonia and ammonium carbonate for 6 h, gives a-aminoisobutyric acid [62-57-7] in 86% yield (7). Primary and secondary amines can also be used to displace the hydroxyl group to obtain A/-substituted and Ai,A/-disubstituted a-amino nitriles. The Strecker synthesis can also be appHed to aromatic ketones. Similarly, hydrazine reacts with two molecules of cyanohydrin to give the disubstituted hydrazine. 

If primary or secondary amines are used, A/-substituted amides are formed. This reaction is called aminolysis. Hydra2ines yield the corresponding hydra2ides, which can then be treated with nitrous acid to form the a2ides used in the Curtius rearrangement. Hydroxylamines give hydroxamic acids. 

The palladium-promoted conversion of 1,3-dienes to pyrroles proceeds via 4-acetoxy-2-alkenylpalladium complexes (Scheme 50g) (81CC59), and a similar pathway may be involved in the palladium mediated reaction of but-2-ene-l,4-diol with primary amines to give A-substituted pyrroles (74CC931). 

The procedure described is essentially that of Shioiri and Yamada. Diphenyl phosphorazidate is a useful and versatile reagent in organic synthesis. It has been used for racemlzatlon-free peptide syntheses, thiol ester synthesis, a modified Curtius reaction, an esterification of a-substituted carboxylic acld, formation of diketoplperazines, alkyl azide synthesis, phosphorylation of alcohols and amines,and polymerization of amino acids and peptides. - Furthermore, diphenyl phosphorazidate acts as a nitrene source and as a 1,3-dipole.An example in the ring contraction of cyclic ketones to form cycloalkanecarboxylic acids is presented in the next procedure, this volume. 

---