Amine oxides alcohols

Non-microsomal oxidations may be subdivided into amine oxidation, alcohol and aldehyde oxidation, dehalogenation, purine oxidation, and aromatization. 

Carbamates are produced by the oxidative carbonylation of amines in alcohol, and active research on the commercial production of carbamates as a precursor of isoyanates based on this reaction has been carried out. As an example, ethyl phenylcarbamate (582) is produced in a high yield (95%) with... 

Many different types of foaming agents are used, but nonionic surfactants are the most common, eg, ethoxylated fatty alcohols, fatty acid alkanolamides, fatty amine oxides, nonylphenol ethoxylates, and octylphenol ethoxylates, to name a few (see Alkylphenols). Anionic surfactants can be used, but with caution, due to potential complexing with cationic polymers commonly used in mousses. 

Linear alpha-olefins are the source of the largest volume of ahphatic amine oxides. The olefin reacts with hydrogen bromide in the presence of peroxide catalyst, to yield primary alkyl bromide, which then reacts with dimethylamine to yield the corresponding alkyl dimethyl amine. Fatty alcohols and fatty acids are also used to produce amine oxides (Fig. 1). 

Amine oxides used in industry are prepared by oxidation of tertiary amines with hydrogen peroxide solution using either water or water and alcohol solution as a solvent. A typical industrial formulation is as follows ... 

Industrial specifications for aHphatic tertiary amine oxides generally requite an amine oxide content of 20—50%. These products may contain as much as 5% unreacted amine, although normally less than 2% is present. Residual hydrogen peroxide content is usually less than 0.5%. The most common solvent systems employed are water and aqueous isopropyl alcohol, although some amine oxides are available ia aoapolar solveats. Specificatioas for iadividual products are available from the producers. 

Catalysts used for preparing amines from alcohols iaclude cobalt promoted with tirconium, lanthanum, cerium, or uranium (52) the metals and oxides of nickel, cobalt, and/or copper (53,54,56,60,61) metal oxides of antimony, tin, and manganese on alumina support (55) copper, nickel, and a metal belonging to the platinum group 8—10 (57) copper formate (58) nickel promoted with chromium and/or iron on alumina support (53,59) and cobalt, copper, and either iron, 2iac, or zirconium (62). 

This formula was confirmed hy Haworth and Perkin s synthesis of a-flZZocryptopine from herherine, the first application of a process, of which examples have heen given already in the syntheses of cryptopine (p. 298) and protopine (p. 301) hy the same authors. Anhydrotetrahydromethyl-herherine (I cf. hase (a), p. 346) in dry chloroform was added to a solution of perhenzoic acid in ether cooled helow 5°. The amine oxide, C21H23O5N (II), separated as an oil, which after shaking with sodium hydroxide solution, solidified and was crystallised from water in slender prisms, m.p. 135°. It was dissolved in acetic acid, hydrochloric acid added, the mixture heated in boiling water for an hour and the hase precipitated hy addition of potassium hydroxide. The precipitate was dissolved in methyl alcohol, ether added, the alcohol washed out with water and the ethereal... 

Cadmium complexes acety(acetone, 2, 372 alcohols, 5, 964 amides, 5,944 amine oxides, 5,964 amines, 5,933 amino acids, 5, 938... 

One of the exciting results to come out of heterogeneous catalysis research since the early 1980s is the discovery and development of catalysts that employ hydrogen peroxide to selectively oxidize organic compounds at low temperatures in the liquid phase. These catalysts are based on titanium, and the important discovery was a way to isolate titanium in framework locations of the inner cavities of zeolites (molecular sieves). Thus, mild oxidations may be run in water or water-soluble solvents. Practicing organic chemists now have a way to catalytically oxidize benzene to phenols alkanes to alcohols and ketones primary alcohols to aldehydes, acids, esters, and acetals secondary alcohols to ketones primary amines to oximes secondary amines to hydroxyl-amines and tertiary amines to amine oxides. 

Oxidative Animation of Nitrones to a-Amino-Substituted Nitroxyl Radicals Similar to the oxidative methoxylation reaction, oxidative animation of 4H -imidazole TV-oxides, in amine saturated alcohol solutions, give stable nitroxyl (282), nitronyl nitroxyl (283), imino nitroxyl (284) and (285) radicals with the amino group at the a-carbon atom of the nitroxyl group (Scheme 2.107) (520, 521). The observed influence of substituents on the ratio of animation products at C2 and C5 atom is close to the ratio observed in the previously mentioned oxidative methoxylation reaction. It allows us to draw conclusions about the preference of the radical cation reaction route. 

Aryl and alkyl hydroxylations, epoxide formation, oxidative dealkylation of heteroatoms, reduction, dehalogenation, desulfuration, deamination, aryl N-oxygenation, oxidation of sulfur Oxidation of nucleophilic nitrogen and sulfur, oxidative desulfurization Oxidation of aromatic hydrocarbons, phenols, amines, and sulfides oxidative dealkylation, reduction of N-oxides Alcohol oxidation reduction of ketones Oxidative deamination... 

Cross double carbonylation of amines and alcohols Oxamates can be prepared by double carbonylation of amines and alcohols in the presence of (CH,CN)2PdCl2 as catalyst with 02 and Cul as oxidant and co-catalyst. This reaction is particularly efficient when applied to (3-amino alcohols. 

The acidity of the propargylic proton of the starting compound 18 allows the equilibration with the allene 19 induced by bases such as tertiary amines or alcoholates (Scheme 7.4). Such prototropic rearrangements furnish the title compounds 19 with at least one proton at the terminal carbon atom, often in good yields. The EWG group involves carboxylic acids [33], esters [34], ketones [35, 36], isonitriles [37], sul-fones [38], sulfoxides [39, 40] and phosphonates [41], The oxidation of easily accessi-... 

Few studies have systematically examined how chemical characteristics of organic reductants influence rates of reductive dissolution. Oxidation of aliphatic alcohols and amines by iron, cobalt, and nickel oxide-coated electrodes was examined by Fleischman et al. (38). Experiments revealed that reductant molecules adsorb to the oxide surface, and that electron transfer within the surface complex is the rate-limiting step. It was also found that (i) amines are oxidized more quickly than corresponding alcohols, (ii) primary alcohols and amines are oxidized more quickly than secondary and tertiary analogs, and (iii) increased chain length and branching inhibit the reaction (38). The three different transition metal oxide surfaces exhibited different behavior as well. Rates of amine oxidation by the oxides considered decreased in the order Ni > Co >... 

J.J. Rang, C.A. Miller, H.H. Hoffmann, and C. Thunig Behavior of Hydrocar-bon/Alcohol Drops Injected into Dilute Solutions of an Amine Oxide Surfactant. Ind. Eng. Chem. Res. 35, 3233 (1996). 

Like its monomeric counterpart, the polymeric reagent is inert to simple amines, amides, alcohols and phenols, but easily oxidizes thiols to disulphides, phosphines to phosphine oxides, hydroquinone and catechol to quinones, and thioketones, thioesters and trithiocar-bonates to the corresponding 0x0 derivatives, in dichloromethane, chloroform or acetic... 

---