Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Reductions with Aluminum

Aluminum. Reductions with aluminum are not commonly found, however, I have included the preparation of the amalgam. Aluminum can be used to reduce aromatic nitro compounds (Org, Syn., 52, 77(1972). [Pg.32]

Give the structure of an ester that will yield a mixture contain mg equimolar amounts of 1 propanol and 2 propanol on reduction with lithium aluminum hydride... [Pg.632]

Reduction to alcohols (Section 15 2) Aide hydes are reduced to primary alcohols and ketones are reduced to secondary alcohols by a variety of reducing agents Catalytic hydrogenation over a metal catalyst and reduction with sodium borohydride or lithium aluminum hydride are general methods... [Pg.713]

Reduction with lithium aluminum hydride (Sec tion15 3) Lithium alumi num hydride cleaves es ters to yield two alcohols... [Pg.848]

In general, if the desired carbon—phosphoms skeleton is available in an oxidi2ed form, reduction with lithium aluminum hydride is a powerful technique for the production of primary and secondary phosphines. The method is appHcable to halophosphines, phosphonic and phosphinic acids as well as thein esters, and acid chlorides. Tertiary and secondary phosphine oxides can be reduced to the phosphines. [Pg.379]

Sihca is reduced to siUcon at 1300—1400°C by hydrogen, carbon, and a variety of metallic elements. Gaseous siUcon monoxide is also formed. At pressures of >40 MPa (400 atm), in the presence of aluminum and aluminum haUdes, siUca can be converted to silane in high yields by reaction with hydrogen (15). SiUcon itself is not hydrogenated under these conditions. The formation of siUcon by reduction of siUca with carbon is important in the technical preparation of the element and its alloys and in the preparation of siUcon carbide in the electric furnace. Reduction with lithium and sodium occurs at 200—250°C, with the formation of metal oxide and siUcate. At 800—900°C, siUca is reduced by calcium, magnesium, and aluminum. Other metals reported to reduce siUca to the element include manganese, iron, niobium, uranium, lanthanum, cerium, and neodymium (16). [Pg.471]

Other methods iaclude hydrogen reduction of TiCl to TiCl and TiCl2 reduction above the melting poiat of titanium metal with sodium, which presents a container problem plasma reduction, ia which titanium is collected as a powder, and ionized and vaporized titanium combine with chlorine gas to reform TiCl2 on cool-down and aluminum reduction, which reduces TiCl to lower chlorides (19,20). [Pg.100]

Chromium oxide is mixed with aluminum powder, placed in a refractory-lined vessel, and ignited with barium peroxide and magnesium powder. The reaction is exothermic and self-sustaining. Chromium metal of 97—99% purity is obtained, the chief impurities being aluminum, iron, and silicon (Table 4). Commercial chromium metal may also be produced from the oxide by reduction with silicon in an electric-arc furnace. [Pg.116]

Oxygen-containing azoles are readily reduced, usually with ring scission. Only acyclic products have been reported from the reductions with complex metal hydrides of oxazoles (e.g. 209 210), isoxazoles (e.g. 211 212), benzoxazoles (e.g. 213 214) and benzoxazolinones (e.g. 215, 216->214). Reductions of 1,2,4-oxadiazoles always involve ring scission. Lithium aluminum hydride breaks the C—O bond in the ring Scheme 19) 76AHC(20)65>. [Pg.68]

An aiyl methane- or toluenesulfonate ester is stable to reduction with lithium aluminum hydride, to the acidic conditions used for nitration of an aromatic ring (HNO3/HOAC), and to the high temperatures (200-250°) of an Ullman reaction. Aiyl sulfonate esters, formed by reaction of a phenol with a sulfonyl chloride in pyridine or aqueous sodium hydroxide, are cleaved by warming in aqueous sodium hydroxide. ... [Pg.168]

The third category for interactions is high dose (III). The effects produced by this level of interaction can be seen by the casual observer. The result of high-dose exposure is destruction or severe injury of the forest system. High-dose conditions are almost always associated with point source emissions. The pollutants most often involved are SO2 and hydrogen fluoride. Historically, the most harmful sources of pollution for surrounding forest ecosystems have been smelters and aluminum reduction plants. [Pg.120]

Kyba and eoworkers prepared the similar, but not identical compound, 26, using quite a different approach. In this synthesis, pentaphenylcyclopentaphosphine (22) is converted into benzotriphosphole (23) by reduction with potassium metal in THF, followed by treatment with o "t/20-dichlorobenzene. Lithium aluminum hydride reduction of 23 affords l,2-i>/s(phenylphosphino)benzene, 24. The secondary phosphine may be deprotonated with n-butyllithium and alkylated with 3-chlorobromopropane. The twoarmed bis-phosphine (25) which results may be treated with the dianion of 24 at high dilution to yield macrocycle 26. The overall yield of 26 is about 4%. The synthetic approach is illustrated in Eq. (6.16), below. [Pg.274]

Thakar and Subba Rao showed that reductions with diborane give the same result regardless of whether diborane is generated externally or produced internally by the action of NaBH4 and boron trifluoride or aluminum chloride. They found that alicyclic or dialkyl ketones are not reduced beyond the alcohol stage even under drastic conditions however, diaryl ketones are hydrogenolyzed under normal conditions, while aryl ketones or a,i5-unsatu-rated ketones are hydrogenolyzed, in part, under drastic conditions. [Pg.90]

During the course of these mechanistic studies a wide range of possible applications of this reaction have been revealed. When the reduction is carried out with lithium aluminum deuteride and the anion complex decomposed with water, a monodeuterio compound (95) is obtained in which 70% of the deuterium is in the 3a-position. Reduction with lithium aluminum hydride followed by hydrolysis with deuterium oxide yields mainly (70 %) the 3j5-di-epimer (96), while for the preparation of dideuterio compounds (94) both steps have to be carried out with deuterated reagents. ... [Pg.174]

In certain cases this reduction (with lithium aluminum hydride) takes a different course, and olefins are formed. The effect is dependent on both the reagent concentration and the steric environment of the hydrazone. Dilute reagent and hindered hydrazone favor olefins borohydride gives the saturated hydrocarbon. The hydrogen picked up in olefin formation comes from solvent, and in full reduction one comes from hydride and the other from solvent. This was shown by deuteriation experiments with the hydrazone (150) ... [Pg.352]

The configurations assigned to (8) and (9) were established by comparison with the products resulting from epoxidation of 3-methyl-5a-cholest-2-ene followed by reduction with lithium aluminum hydride to the alcohol (9). The usual /ra 5-diaxial epoxide opening requires that the hydroxyl group, formed by reduction, is axial as shown in (9). [Pg.57]

The milder metal hydnde reagents are also used in stereoselective reductions Inclusion complexes of amine-borane reagent with cyclodexnins reduce ketones to opucally active alcohols, sometimes in modest enantiomeric excess [59] (equation 48). Diisobutylaluminum hydride modified by zmc bromide-MMA. A -tetra-methylethylenediamme (TMEDA) reduces a,a-difluoro-[i-hydroxy ketones to give predominantly erythro-2,2-difluoro-l,3-diols [60] (equation 49). The three isomers are formed on reduction with aluminum isopropoxide... [Pg.308]

Studies of reductions with metal hydndes have concentrated on improvements in selectivity or conditions Replacement of the usual lithium aluminum hydnde-ether combination with potassium borohydride-methanol results m high yields of alcohol from ester [76] and less hazard [77] (equation 62) Reduction of a... [Pg.311]

Although isolated fluonne atoms can survive reductions with hthium aluminum hydnde when they are not m a position a to an ester or nitnle group [79] (equauons 63a and 63b), those in an a position arc reducti vely cleaved The milder borohydride reagents convert an a fluorocarboxylate ester to the corresponding alcohol without loss of fluonne [501 (equation 64)... [Pg.312]

The reduction of the double bond of an enamine is normally carried out either by catalytic hydrogenation (MS) or by reduction with formic acid (see Section V.H) or sodium borohydride 146,147), both of which involve initial protonation to form the iminium ion followed by hydride addition. Lithium aluminum hydride reduces iminium salts (see Chapter 5), but it does not react with free enamines except when unusual enamines are involved 148). [Pg.164]


See other pages where Reductions with Aluminum is mentioned: [Pg.748]    [Pg.140]    [Pg.105]    [Pg.375]    [Pg.503]    [Pg.29]    [Pg.432]    [Pg.383]    [Pg.60]    [Pg.262]    [Pg.1599]    [Pg.161]    [Pg.61]    [Pg.91]    [Pg.98]    [Pg.176]    [Pg.497]    [Pg.159]    [Pg.297]    [Pg.634]    [Pg.748]    [Pg.260]   
See also in sourсe #XX -- [ Pg.407 ]




SEARCH



4-/-Butylcyclohexanone, reduction with aluminum chloride

Aldehydes, reduction with aluminum borohydride

Alkyl fluorides reduction with lithium aluminum hydride

Aluminum alkoxides, reduction with

Aluminum alkoxides, reduction with mechanism

Aluminum reduction

Aluminum reductive ring opening with

Amide reduction with lithium aluminum hydride

Amide, sodium reduction with aluminum

Asymmetric reductions with chiral aluminum reagents

Borohydride aluminum, reduction with

Carboxylic acids, reduction with aluminum borohydride

Hydride, aluminum reduction with

Ketones, reduction with aluminum alkoxides

Lithium aluminum deuteride reduction with

Lithium aluminum hydride reduction, alcohols from, with carbonyl compounds

Lithium aluminum hydride, reduction reactions with

Nitro compounds reduction with aluminum amalgam

Nitrogen compounds, reduction with aluminum hydride

Oximes, reduction with lithium aluminum hydride

Oximinomalononitrile, from nitrosation reduction with aluminum amalgam

Oxirane reduction with lithium aluminum hydride

Pre-Reduction of Carbonyl Groups with Lithium Aluminum Hydride

Pregnenolone acetate, reduction with lithium aluminum tri-Z-butoxyhydride

Reduction of Carbonyl Compounds with Aluminum Alkoxides

Reduction with aluminum amalgam

Reduction, of 3/3-acetoxy-5-pregnene-20one with lithium aluminum chloride

Reductions with lithium aluminum hydride

Reductions with nickel aluminum alloy

Reductive Stabilization with Aluminum Alkyls

Reductive cleavage with lithium aluminum hydride

© 2024 chempedia.info