Dialkyl ketone

The dibenzyl ketone has a very high b.p. (ca. 200°/21 mm.) and this remains in the flask when the unsymmetrical ketone has been removed by distillation. The dialkyl ketone has a comparatively low b.p. and is therefore easily removed by fractionation under normal pressure acetone is most simply separated by washing with water. In this way methyl benzyl ketone (R = CHj), ethyl benzyl ketone (R = CHgCH,) and n-propyl benzyl ketone (R = CHjCHjCH,) are prepared. By using hydrocinnamic acid in place of phenylacetic acid ... 

The above is an example of the Guareschi reaction. It is applicable to most dialkyl ketones and to alicyclic ketones (e.g., cyclohexanone, cyc/opentanone, etc.). The condensation product (I) is probably formed by a simple Knoe-venagel reaction of the ketone and ethyl cyanoacetate to yield ethyl a-cyano-pp dimethylacrylate (CH3)2C=C(CN)COOCjHj, followed by a Michael ad tion of a second molecule of ethyl cyanoacetate finally, the carbethoxyl groups are converted to the cyclic imide structure by the action of ammonia. 

In the alternative approach.the 1,3-dipolar system can be constructed in several ways. Treatment of a-chloroacylhydrazones of diaryl ketones and certain aralkyl and dialkyl ketones (382) with NaH in anhydrous THF gives l-(disubstituted methylene)-3-oxo-l,2-diazetidinium inner salts (383). Reaction of (383) with DMAD in methylene chloride gave (384), a 2 1 adduct with loss of CO. Double bond migration in (384) occurred on heating to give (385). The intermediate in the cycloaddition was found to be (386), which on heating lost CO to form a new ylide system which in turn underwent reaction with more DMAD <81JA7743). 

Even the trivial decomposition of oxaziridines may have some importance. In the oxidation of s-alkylamines to ketones conversion to the Schiff base of 2-pyridinealdehyde was proposed, followed by peracid oxidation to the oxaziridine (295). Decomposition by alkali yields the ketone added excess acetone suppresses condensation of pyridinealdehyde with dialkyl ketone (75AJC2547). 

Thakar and Subba Rao showed that reductions with diborane give the same result regardless of whether diborane is generated externally or produced internally by the action of NaBH4 and boron trifluoride or aluminum chloride. They found that alicyclic or dialkyl ketones are not reduced beyond the alcohol stage even under drastic conditions however, diaryl ketones are hydrogenolyzed under normal conditions, while aryl ketones or a,i5-unsatu-rated ketones are hydrogenolyzed, in part, under drastic conditions. 

The reaction is sensitive to the presence of water, which inhibits the migration of the third alkyl group and leads to dialkyl ketones (see Chapter 12, Section II). The convenience of the hydroboration reaction combined with the use of carbon monoxide at atmospheric pressure provides the most accessible route to many trialkylcarbinols. 

As mentioned in the preceding section, the presence of water during the reaction of trialkylboranes with carbon monoxide inhibits the migration of the third alkyl group and leads to production of dialkyl ketones (i). This fact can be employed to advantage for the preparation of dialkyl ketones as shown in the scheme. 

The following dialkyl ketones may be prepared by an analogous procedure with the time required for the absorption of carbon monoxide as shown (Table 12.2). 

Notable examples of general synthetic procedures in Volume 47 include the synthesis of aromatic aldehydes (from dichloro-methyl methyl ether), aliphatic aldehydes (from alkyl halides and trimethylamine oxide and by oxidation of alcohols using dimethyl sulfoxide, dicyclohexylcarbodiimide, and pyridinum trifluoro-acetate the latter method is particularly useful since the conditions are so mild), carbethoxycycloalkanones (from sodium hydride, diethyl carbonate, and the cycloalkanone), m-dialkylbenzenes (from the />-isomer by isomerization with hydrogen fluoride and boron trifluoride), and the deamination of amines (by conversion to the nitrosoamide and thermolysis to the ester). Other general methods are represented by the synthesis of 1 J-difluoroolefins (from sodium chlorodifluoroacetate, triphenyl phosphine, and an aldehyde or ketone), the nitration of aromatic rings (with ni-tronium tetrafluoroborate), the reductive methylation of aromatic nitro compounds (with formaldehyde and hydrogen), the synthesis of dialkyl ketones (from carboxylic acids and iron powder), and the preparation of 1-substituted cyclopropanols (from the condensation of a 1,3-dichloro-2-propanol derivative and ethyl-... 

Either or both of the R groups may be aryl. In general, dialkyl ketones and cyclic ketones react more rapidly than alkyl aryl ketones, and these more rapidly than diaryl ketones. The latter require sulfuric acid and do not react in concentrated HCl, which is strong enough for dialkyl ketones. Dialkyl and cyclic ketones react sufficiently faster than diaryl or aryl alkyl ketones or carboxylic acids or alcohols that these functions may be present in the same molecule without interference. Cyclic ketones give lactams. 

The dimerization of ketones to 1,2-diols can also be accomplished photochemi-cally indeed, this is one of the most common photochemical reactions. The substrate, which is usually a diaryl or aryl alkyl ketone (though a few aromatic aldehydes and dialkyl ketones have been dimerized), is irradiated with UV light in the presence of a hydrogen donor such as isopropyl alcohol, toluene, or an amine. In the case of benzophenone, irradiated in the presence of 2-propanol, the ketone molecule initially undergoes n — k excitation, and the singlet species thus formed crosses to the T, state with a very high efficiency. 

Various aryl-alkyl ketones and dialkyl ketones could be reduced using the Rh(III) - NHC catalyst 55 in high yields (82-96%) and with good to excellent enantioselectivities (67-98% ee) (Scheme 34). 

It was independently found by two groups that the exo-diol derived from bis(camphorsulfonyl)-substituted tra .s-cyclohexane-1,2-diamine ligand (HOCSAC) was an excellent promoter for the enantioselective addition of dialkyIzinc reagents to any type of ketones, even dialkyl ketones, in the presence of Ti(Oi-Pr)4. As shown in Scheme 4.11, excellent enantioselectivities of up to 99% ee were obtained in these conditions in combination with high yields and with a low catalyst loading of 2-10 mol%. 

Another approach in the use of chiral S/P ligands for the hydrosilylation reaction of ketones was proposed more recently by Evans et Thus, in 2003, these workers studied the application of new chiral thioether-phosphinite ligands to enantioselective rhodium-catalysed ketone hydrosilylation processes. For a wide variety of ketones, such as acyclic aryl alkyl and dialkyl ketones as well as cyclic aryl alkyl ketones and also cyclic keto esters, the reaction gave high levels of enantioselectivity of up to 99% ee (Scheme 10.44). 

Note also that dialkyl ketones such as acetone and 3-pentanone are slightly more acidic than the simple alcohols in DMSO. Use of alkoxide bases in DMSO favors enolate formation. For the amide bases, -K b-h) << a(c-H)> and complete formation of the enolate occurs. 

Deprotonation of the corresponding carbonyl compound is a fundamental method for the generation of enolates, and we discuss it here for ketones and esters. An unsymmetrical dialkyl ketone can form two regioisomeric enolates on deprotonation. 

Prochiral aryl and dialkyl ketones are enantioselectively reduced to the corresponding alcohols using whole-cell bioconversions, or an Ir1 amino sulfide catalyst prepared in situ.695 Comparative studies show that the biocatalytic approach is the more suitable for enantioselective reduction of chloro-substituted ketones, whereas reduction of a,/ -unsaturated compounds is better achieved using the Ir1 catalyst. An important step in the total synthesis of brevetoxin B involves hydrogenation of an ester using [Ir(cod)(py) P(cy)3 ]PF6.696... 

The asymmetric organosilane reduction of prochiral ketones has been studied as an alternative to the asymmetric hydrogenation approach. A wide variety of chiral ligand systems in combination with transition metals can be employed for this purpose. The majority of these result in good to excellent chemical yields of the corresponding alcohols along with a trend for better ee results with aryl alkyl ketones than with prochiral dialkyl ketones. 

The PennPhos ligands, for example 108, complexed with rhodium, provide an excellent system for the hydrogenation of aryl alkyl ketones with ee values in the range of 94-96% (Eq. 362). Phenyl isopropyl ketone shows only a 72% ee under similar conditions. Dialkyl ketones exhibit ee values in the range of 73-94% with this system (Eq. 363).640... 

Steric effects on both the amide and the acyloxyl side chain are similar. Tert-butyl and adamantyl groups on the amide side chain in 29v, 29x, 29c, and 29e (Table 2 entries 53 and 54, 63 and 65) result in lower stretch frequencies that, on average, are only 40 cm-1 higher than their precurser hydroxamic esters. Streck and coworkers have suggested that such changes in dialkyl ketones can be ascribed to destabilisation of resonance form II through steric hindrance to solvation which, in the case of tert-butyl counteracts the inductive stabilisation.127... 

Streck and coworkers showed that in a range of solvents, the 13C carbonyl shifts in dialkyl ketones were affected similarly by branching at the a-position.127 In chloroform, the carbonyls of di-tert-butylketone and diisopropylketone were 11-12 ppm downfield of that of acetone, which they attributed to a mixture of inductive and steric effects. With tertiary systems, particularly in dipolar solvents, hindrance to solvent stabilisation of the polar, basic form of the carbonyl offsets the inductive stabilisation of the branched alkyl. 13C NMR data presented here support this. 

---