Allyl acetates conditions

In contrast to oxidation in water, it has been found that 1-alkenes are directly oxidized with molecular oxygen in anhydrous, aprotic solvents, when a catalyst system of PdCl2(MeCN)2 and CuCl is used together with HMPA. In the absence of HMPA, no reaction takes place(100]. In the oxidation of 1-decene, the Oj uptake correlates with the amount of 2-decanone formed, and up to 0.5 mol of O2 is consumed for the production of 1 mol of the ketone. This result shows that both O atoms of molecular oxygen are incorporated into the product, and a bimetallic Pd(II) hydroperoxide coupled with a Cu salt is involved in oxidation of this type, and that the well known redox catalysis of PdXi and CuX is not always operalive[10 ]. The oxidation under anhydrous conditions is unique in terms of the regioselective formation of aldehyde 59 from X-allyl-A -methylbenzamide (58), whereas the use of aqueous DME results in the predominant formation of the methyl ketone 60. Similar results are obtained with allylic acetates and allylic carbonates[102]. The complete reversal of the regioselectivity in PdCli-catalyzed oxidation of alkenes is remarkable. 

Allylic acetates are widely used. The oxidative addition of allylic acetates to Pd(0) is reversible, and their reaction must be carried out in the presence of bases. An important improvement in 7r-allylpalladium chemistry has been achieved by the introduction of allylic carbonates. Carbonates are highly reactive. More importantly, their reactions can be carried out under neutral con-ditions[13,14]. Also reactions of allylic carbamates[14], allyl aryl ethers[6,15], and vinyl epoxides[16,17] proceed under neutral conditions without addition of bases. 

Allylation under basic conditions. Allylation can be carried out under basic conditions with allylic acetates and phosphates, and under neutral conditions with carbonates and vinyloxiranes. The allylations under neutral conditions are treated separately in Section 2.2.2.1 from those under basic conditions. However, in some cases, allylations of the same substrates are carried out under both basic and neutral conditions to give similar results. These reactions are treated together in this section for convenience. Allylic acetates are widely used for Pd-catalyzed allylation in the presence of bases tertiary amines or NaH are commonly used[6,7,4l]. As a base, basic alumina or ICF on alumina is conveniently used, because it is easy to remove by filtration after the reaction[42]. Allyl phosphates are more reactive than acetates. The allylation with 40 proceeds stepwise. At first allylic phosphate reacts with malonate and then allylic acetate reacts with amine to give 41(43]. 

Wylation under neutral conditions. Reactions which proceed under neutral conditions are highly desirable, Allylation with allylic acetates and phosphates is carried out under basic conditions. Almost no reaction of these allylic Compounds takes place in the absence of bases. The useful allylation under neutral conditions is possible with some allylic compounds. Among them, allylic carbonates 218 are the most reactive and their reactions proceed under neutral conditions[13,14,134], In the mechanism shown, the oxidative addition of the allyl carbonates 218 is followed by decarboxylation as an irreversible process to afford the 7r-allylpalladium alkoxide 219. and the generated alkoxide is sufficiently basic to pick up a proton from active methylene compounds, yielding 220. This in situ formation of the alkoxide. which is a... 

Phenols arc highly reactive 0-nucleophiles and allylated easily with allylic carbonates under neutral conditions. EWGs on phenols favor the reac-tion[213]. Allylic acetates are used for the allylation of phenol in the presence of KF-alumina as a base[214]. 

Various S-nucleophiles are allylated. Allylic acetates or carbonates react with thiols or trimethylsilyl sulfide (353) to give the allylic sulfide 354[222], Allyl sulfides are prepared by Pd-catalyzed allylic rearrangement of the dithio-carbonate 355 with elimination of COS under mild conditions. The benzyl alkyl sulfide 357 can be prepared from the dithiocarbonate 356 at 65 C[223,224], The allyl aryl sufide 359 is prepared by the reaction of an allylic carbonate with the aromatic thiol 358 by use of dppb under neutral condi-tions[225]. The O-allyl phosphoro- or phosphonothionate 360 undergoes the thiono thiolo allylic rearrangement (from 0-allyl to S -allyl rearrangement) to afford 361 and 362 at 130 C[226],... 

It is known that tr-allylpalladium acetate is converted into allyl acetate by reductive elimination when it is treated with CO[242,243]. For this reason, the carbonylation of allylic acetates themselves is difficult. The allylic acetate 386 is carbonylated in the presence of NaBr (20-50 mol%) under severe conditions, probably via allylic bromides[244]. However, the carbonylation of 5-phenyl-2,4-pentadienyl acetate (387) was carried out in the presence of EtiN without using NaBr at 100 °C to yield methyl 6-phenyl-3,5-hexadienoate (388)[245J. The dicarbonylation of l,4-diacetoxy-2-butene to form the 3-hexenedioate also proceeds by using tetrabutylphosphonium chloride as a ligand in 49% yield[246]. 

The decarboxylation of allyl /3-keto carboxylates generates 7r-allylpalladium enolates. Aldol condensation and Michael addition are typical reactions for metal enolates. Actually Pd enolates undergo intramolecular aldol condensation and Michael addition. When an aldehyde group is present in the allyl fi-keto ester 738, intramolecular aldol condensation takes place yielding the cyclic aldol 739 as a main product[463]. At the same time, the diketone 740 is formed as a minor product by /3-eIimination. This is Pd-catalyzed aldol condensation under neutral conditions. The reaction proceeds even in the presence of water, showing that the Pd enolate is not decomposed with water. The spiro-aldol 742 is obtained from 741. Allyl acetates with other EWGs such as allyl malonate, cyanoacetate 743, and sulfonylacetate undergo similar aldol-type cycliza-tions[464]. 

The hydrolytic DKR of allyl esters has been studied as a DKR of esters. The first DKR was accomplished through Pd-catalyzed racemization and enzymatic hydrolysis of allylic acetates in a buffer solution. However, the DKR under these conditions was limited to cyclohexenyl acetates to give symmetrical palladium-allyl intermediates. Among them, 2-phenyl-2-cyclohexenyl acetate 9 was the only substrate to have been resolved with good results (81% yield, 96% ee). 

Similar results were obtained using n-BuMgBr-CuCN and tertiary allylic acetates, although under these conditions there is competition from SN2 substitution with primary acetates.33 The stereoselectivity is reversed with a hydroxy group, indicating a switch to a chelated TS. 

These conditions are particularly effective for allyl acetate.106 Pd(CH3CN)2CI2... 

Recent papers have disclosed that Pd(0) catalyzed allylic alkylations under neutral conditions are not limited to allylic carbonates or epoxides but also can be extended in many cases to the more popular allylic acetates (Eq. 5.58).sla... 

Iridium-catalyzed transfer hydrogenation of aldehyde 73 in the presence of 1,1-dimethylallene promotes tert-prenylation [64] to form the secondary neopentyl alcohol 74. In this process, isopropanol serves as the hydrogen donor, and the isolated iridium complex prepared from [Ir(cod)Cl]2, allyl acetate, m-nitrobenzoic acid, and (S)-SEGPHOS is used as catalyst. Complete levels of catalyst-directed diastereoselectivity are observed. Exposure of neopentyl alcohol 74 to acetic anhydride followed by ozonolysis provides p-acetoxy aldehyde 75. Reductive coupling of aldehyde 75 with allyl acetate under transfer hydrogenation conditions results in the formation of homoallylic alcohol 76. As the stereochemistry of this addition is irrelevant, an achiral iridium complex derived from [Ir(cod)Cl]2, allyl acetate, m-nitrobenzoic acid, and BIPHEP was employed as catalyst (Scheme 5.9). 

Allyl tosylate is also an excellent reactant (entry 2, Table 5.8), while allyl acetate is not under Cu(I)-catalyzed conditions. Not only saturated acylzirconocene chlorides, but also a,(3-unsaturated acylzirconocene chlorides give coupling products in good yields (entry 8, Table 5.8). Prenyl bromide also reacts with acylzirconocene chlorides under identical conditions to give a mixture of regioisomers (Scheme 5.30). However, a longer reaction time (10 h) is required for the completion of the reaction as compared to the reaction of allyl bromide (1 h). 

Murakami generated 3-tributylstannylindoles in situ (but also isolable) using 3-bromoindole 174, allylic acetates and carbonates, and hexamethylditin [179]. A typical procedure is illustrated for the synthesis of 175. The corresponding 5-bromo analog is allylated to the extent of 59%. 3-Stannylindoles couple smoothly in tandem fashion with 2,3-dibromo-5,6-dimethylbenzoquinone under Stille conditions [180]. 

The Pd(0)-catalyzed displacement of allylic acetates (297) with various nucleophiles via the allylic Pd(II) complex (298) is a well-established procedure (Scheme 114). Through attack of electrons (+2e ) in place of nucleophiles, (298) is expected to undergo a reductive cleavage providing allylic carbanions (299) and the acetate anion along with Pd(0) complexes. The latter can then be captured by various electrophiles (polarity inversion. Scheme 114) leading to (300) [434]. This procedure is useful for the deprotection of allyl esters under neutral conditions. Recently, a mechanistic study of the Pd-catalyzed reaction of allylic acetate (297), using carbonyl compounds as an electrophile, has been reported [435]. 

More recently, using the cyclometallated iridium C,(7-benzoate derived from allyl acetate, 4-methoxy-3-nitrobenzoic acid and BIPHEP, catalytic carbonyl crotylation employing 1,3-butadiene from the aldehyde, or alcohol oxidation was achieved under transfer hydrogenation conditions [274]. Carbonyl addition occurs with roughly equal facility from the alcohol or aldehyde oxidation level. However, products are obtained as diastereomeric mixtures. Stereoselective variants of these processes are under development. It should be noted that under the conditions of ruthenium-catalyzed transfer hydrogenation, conjugated dienes, including butadiene, couple to alcohols or aldehydes to provide either products of carbonyl crotylation or p,y-enones (Scheme 16) [275, 276]. 

Under the conditions of ruthenium catalysis, alcohols and allylic acetates couple to form enones,... 

Reactions of allylic electrophiles with stabilized carbon nucleophiles were shown by Helmchen and coworkers to occur in the presence of iridium-phosphoramidite catalysts containing LI (Scheme 10) [66,69], but alkylations of linear allylic acetates with salts of dimethylmalonate occurred with variable yield, branched-to-linear selectivity, and enantioselectivity. Although selectivities were improved by the addition of lithium chloride, enantioselectivities still ranged from 82-94%, and branched selectivities from 55-91%. Reactions catalyzed by complexes of phosphoramidite ligands derived from primary amines resulted in the formation of alkylation products with higher branched-to-linear ratios but lower enantioselectivities. These selectivities were improved by the development of metalacyclic iridium catalysts discussed in the next section and salt-free reaction conditions described later in this chapter. 

Tab. 10.12 summarizes the application of the optimized reaction conditions to a series of racemic secondary allylic acetates, wherein the reaction demonstrates remarkable enantioselectivity for an array of substrates. However, the regioselectivity of this... 

Allylic acetates are usually prepared by esterification from allylic alcohols. However, the corresponding alcohols are often only accessible by the fairly expensive hydride reduction of carbonyl compounds. Consequently, direct allylic functionalization of easily available olefins has been intensively investigated. Most of these reactions involve peroxides or a variety of metal salts.However, serious drawbacks of these reactions, (e.g. toxicity of some metals, stoichiometric reaction conditions, or nongenerality) may be responsible for their infrequent use for the construction of allylic alcohols or acetates. 

The first systematic investigations of the catalytic Friedel-Crafts-type reaction with alcohols and olefines were performed by Yamamoto and colleagues. After reporting the development of a Pd-catalyzed method for the allylation of different naphthol derivatives [24], the authors used Mo(CO)g for the Friedel-Crafts-type alkylation of electron-rich arenes with allyl acetates [25], The same molybdenum catalyst was additionally used for a Friedel-Crafts-type alkylation of arenes using 1-phenylethanol and styrene as alkylating reagents [26], However, Mo(CO)g is toxic and must be handled under strictly inert conditions. Thus, more stable Lewis acids were necessary. 

Schkeryantz and Pearson (59) reported a total synthesis of ( )-crinane (298) using an intramolecular azide-alkene cycloaddition (Scheme 9.59). The allylic acetate 294 was first subjected to an Ireland-Claisen rearrangement followed by reduction to give alcohol 295, which was then converted into the azide 296 using Mitsunobu conditions. Intramolecular cycloaddition of the azide 296 in refluxing toluene followed by extrusion of nitrogen gave the imine 297 in quantitative yield. On reduction with sodium cyanoborohydride and subsequent reaction with... 

---