Alkyl to aldehydes

The product is obtained in 95% yield and 94% ee. In the counterpart in solution, the ee was only 21-50%. Polymeric chiral catalysts have also been used in the addition of zinc alkyls to aldehydes. Use of a proline-based copolymer in a continuous asymmetrical synthesis with an ultra filtration membrane gave 80% ee (10.61).138 There was no deactivation in 7 days. A boron-containing polymer (10.62) gave only 28-51% ee compared with the 65-75% ee found with model compounds in solution.139... 

Among monoamines, both enantiomers of 1-phenylethylamine and their derivatives play a prominent role. They are commercially available, but can also be prepared by resolution of the racemate, obtainable by Leuckart- Wallach reaction of acetophenone1, with malic acid2 or, more conveniently, with tartaric acid in methanol3. They are used as chiral additives for the addition of zinc alkyls to aldehydes in Section D. 1.3.1.4., as copper complexes for the synthesis of biaryls in Section B.2., as lithium salts for enantioselective deprotonation in Section C., and as imines in Sections D.1.1.1.3.1., D.1.1.1,4.. D.1.4.4., D.1.5.2., D.1.5.8., D. 1.6.1.2.1., D.2.3.I., and D.8. A general procedure for the synthesis of imines from carbonyl compounds and primary amines, with many examples of both chiral carbonyl compounds and chiral amines is given in reference 4. 

Amino acid esters can be dimerized to dioxopiperazines, which are conveniently reduced with sodium borohydride,/titanium(IV) chloride to give the corresponding chiral piperazine derivatives. Thus, from valine and phenylalanine, useful auxiliaries 20 and 21 were obtained9, and used for the alkylation of carbanions (Section D. 1.1.1.3.1.) and as catalysts for the addition of zinc alkyls to aldehydes (Section D.1.3.1.4.), as well as for enantioselective deprotonation and elimination (Section C.). 

Quinine [1, (8a,9/Q-6 -methoxy-9-cinchonanol] is the most familiar of the cinchona alkaloids. Quinine has been used as a catalyst in the enantioselective addition of zinc alkyls to aldehydes (together with its acetic ester) (Section D. 1.3.1.4.), for the addition of thiols and selenols to activated double-bond systems (Sections D.2.1., D.5. and D.6.), and as a chiral ligand for cobalt catalysts in the hydrogenation of 1,2-diketones to a-hydroxycarbonyl compounds (Section D.2.3.1.) and C-C double bonds (Section D.2.5.1.2.2.). Quinine and quinidine can also be incorporated into more complex systems (forming ethers and esters with its hydroxy function) where they may act as a chiral leaving group. This technique has been applied to the synthesis of chiral binaphthols (Section D.1.1.2.2.). 

Another group of cinchona alkaloids lacks the 6 -mclhoxy group. Cinchonine (7) and its diastereomer cinchonidine (5) are commercially available and have been used as catalysts in the addition of zinc alkyls to aldehydes (Section D. 1.3.1.4.). Cinchonidine and dihydrocin-chonidine (6) were used to modify the surface of platinum catalysts used in the enantioselective reduction of z-oxo esters to a-hydroxy esters (see Section D.2.3.1. for such applications). Dihydrocinchonidine may conveniently be obtained by catalytic reduction of the double bond of cinchonidine, e.g., with nickel and hydrogen7. Cinchonidine also acts as a catalyst in the enantioselective formation of C-S and C-Se bonds by the addition of thiols and selenols to activated alkenes, such as 1-nitroalkenes (Sections D.5. and D.6.). Another application is the enantioselective protonation of kelenes (SectionD.2.I.). 

Both enantiomers of norephedrine are commercially available and have been applied as chiral auxiliaries in [1 +2] cycloadditions (Section D. 1.6.1.5.), and as starting materials for chiral heterocyclic compounds (Section 2.5.3.). iV,./V-Dibutylation of (lS,2/ )-norephedrine gives a highly selective catalyst 5 for the addition of zinc alkyls to aldehydes (Section D.1.3.1.4.) and chalcones (Section D.I.5.8.). 

The hydroxyl groups on glycols undergo the usual alcohol chemistry giving a wide variety of possible derivatives. Hydroxyls can be converted to aldehydes, alkyl hahdes, amides, amines, a2ides, carboxyUc acids, ethers, mercaptans, nitrate esters, nitriles, nitrite esters, organic esters, peroxides, phosphate esters, and sulfate esters (6,7). 

In contrast to triphenylphosphine-modified rhodium catalysis, a high aldehyde product isomer ratio via cobalt-catalyzed hydroformylation requires high CO partial pressures, eg, 9 MPa (1305 psi) and 110°C. Under such conditions alkyl isomerization is almost completely suppressed, and the 4.4 1 isomer ratio reflects the precursor mixture which contains principally the kinetically favored -butyryl to isobutyryl cobalt tetracarbonyl. At lower CO partial pressures, eg, 0.25 MPa (36.25 psi) and 110°C, the rate of isomerization of the -butyryl cobalt intermediate is competitive with butyryl reductive elimination to aldehyde. The product n/iso ratio of 1.6 1 obtained under these conditions reflects the equihbrium isomer ratio of the precursor butyryl cobalt tetracarbonyls (11). 

Ozone converts nitro compounds, where R is alkyl or hydrogen, to aldehydes and ketones... 

This ladical-geneiating reaction has been used in synthetic apphcations, eg, aioyloxylation of olefins and aromatics, oxidation of alcohols to aldehydes, etc (52,187). Only alkyl radicals, R-, are produced from aliphatic diacyl peroxides, since decarboxylation occurs during or very shortiy after oxygen—oxygen bond scission in the transition state (187,188,199). For example, diacetyl peroxide is well known as a source of methyl radicals (206). 

AH ahphatic aldehydes and most ketones react to form cyanohydrins. The lower reactivity of ketones, relative to aldehydes, is attributed to a combination of electron-donating effects and increased steric hindrance of the second alkyl group in the ketones. The magnitude of the equiUbrium constants for the addition of hydrogen cyanide to a carbonyl group is a measure of the stabiUty of the cyanohydrin relative to the carbonyl compound plus hydrogen cyanide ... 

Methylpyrazine reacts with sodamide in liquid ammonia to generate the anion, which may be alkylated to give higher alkylpyrazines (Scheme 10) (61JOC3379). The alkylpyrazines have found extensive use as fiavouring and aroma agents (see Section 2.14.4). Condensation reactions with esters, aldehydes and ketones are common, e.g. methyl benzoate yields phenacylpyrazine in 95% yield, and reactions of this type are summarized in Scheme 11. 

Occasionally, a phenol may have more than one substituent on the ring before alkylation with aldehyde. If the groups are meta to one another and activating, they will enhance the electron density of the same ring positions and reinforce one another. If they are ortho or para to one another, they may increase or reduce reactivity, depending on the nature of the groups. The most common... 

Novolacs are often modified through alkylations based on reactions with monomers other than, and in addition to, aldehydes during their manufacture. Examples might be inclusion of styrene, divinyl benzene, dicyclopentadiene, drying oils, or various alcohols. Despite significant production of all of these variants, most novolac volume is produced using phenol and formaldehyde. 

The mechanisms by which transition-metal oxidizing agents convert alcohols to aldehydes and ketones are complicated with respect to their inorganic chemistry. The organic chemistry is clearer and one possible mechanism is outlined in Figure 15.4. The key intennediate is an alkyl chromate, an ester of an alcohol and chromic acid. 

OL Alkylation of aldehydes and ketones (Section 18.15) Alkylation of simple aldehydes and ketones via their enolates is difficult. p-Diketones can be converted quantitatively to their enolate anions, which react efficiently with primary alkyl halides. 

Variations and Improvements on Alkylations of Chiral OxazoUnes Metalated chiral oxazolines can be trapped with a variety of different electrophiles including alkyl halides, aldehydes,and epoxides to afford useful products. For example, treatment of oxazoline 20 with -BuLi followed by addition of ethylene oxide and chlorotrimethylsilane yields silyl ether 21. A second metalation/alkylation followed by acidic hydrolysis provides chiral lactone 22 in 54% yield and 86% ee. A similar... 

The chiral bicyclic imidazolidine 74 is deprotonated at the 2 position by s-BuLi and the resulting anion adds to alkyl halides, acid chlorides, chlorofor-mates, phenyl isocyanate, and aldehydes. The use of this compound as a chiral formyl anion equivalent seems to be limited, however, since the diastereoselectiv-ity in the addition to aldehydes is poor and hydrolysis of the products 75 to give aldehydes also produces cyclohexane-1,2-diamine, necessitating isolation of the aldehyde as its 2,4-dinitrophenylhydrazone (96SL1109 98T14255). 

Dihydropyrans 88-90 are deprotonated at the vinylic position adjacent to oxygen by t-BuLi and the resulting anions add readily to alkyl halides, aldehydes, and ketones. Subsequent acid hydrolysis provides the products expected from reaction of an oj-functionalized pentanoyl anion 88 acts as HOCH2(CH2)3CO , 89 as 0CH(CH2)3C0 , and 90 as MeCO(CH2)3CO (77TL4187 81T3997). 

The (V-methyldihydrodithiazine 125 has also been used as an effective formyl anion equivalent for reaction with alkyl halides, aldehydes, and ketones (77JOC393). In this case there is exclusive alkylation between the two sulfur atoms, and hydrolysis to give the aldehyde products is considerably easier than for dithianes. However, attempts to achieve a second alkylation at C2 were unsuccessful, thus ruling out the use of this system as an acyl anion equivalent for synthesis of ketones. Despite this limitation, the compound has found some use in synthesis (82TL4995). 

The Schmidt reaction of ketones works best with aliphatic and alicyclic ketones alkyl aryl ketones and diaryl ketones are considerably less reactive. The reaction is only seldom applied to aldehydes as starting materials. The hydrazoic acid used as reagent is usually prepared in situ by treatment of sodium azide with sulfuric acid. Hydrazoic acid is highly toxic, and can detonate upon contact with hot laboratory equipment. 

The conversion of alkyl halides to aldehydes is a synthetic step... 

Besides simple alkyl-substituted sulfoxides, (a-chloroalkyl)sulfoxides have been used as reagents for diastereoselective addition reactions. Thus, a synthesis of enantiomerically pure 2-hydroxy carboxylates is based on the addition of (-)-l-[(l-chlorobutyl)sulfinyl]-4-methyl-benzene (10) to aldehydes433. The sulfoxide, optically pure with respect to the sulfoxide chirality but a mixture of diastereomers with respect to the a-sulfinyl carbon, can be readily deprotonated at — 55 °C. Subsequent addition to aldehydes afforded a mixture of the diastereomers 11A and 11B. Although the diastereoselectivity of the addition reaction is very low, the diastereomers are easily separated by flash chromatography. Thermal elimination of the sulfinyl group in refluxing xylene cleanly afforded the vinyl chlorides 12 A/12B in high chemical yield as a mixture of E- and Z-isomers. After ozonolysis in ethanol, followed by reductive workup, enantiomerically pure ethyl a-hydroxycarboxylates were obtained. 

Polymer-supported amino alcohols and quaternary ammonium salts catalyze the enan-tioselective addition of dialkylzinc reagents to aldehydes (Table 31). When the quaternary ammonium salt F is used in hexane, it is in the solid state, and it catalyzes the alkylation of benzaldehyde with diethylzinc in good chemical yield and moderate enantioselectivity. On the other hand, when a mixture of dimethylformamide and hexane is used as solvent, the ammonium salt is soluble and no enantioselectivity is observed21. 

While the mechanism of the ammonium salt catalyzed alkylation is unclear, in polar solvents the enantioselectivity of the addition of dialkylzincs to aldehydes generally drops considerably, probably due to uncatalyzed product formation or complexation of the zinc reagent with the polar solvent rather than with the chiral auxiliary. 

The polymer-bound catalysts A-C. (Table 31) are prepared by reaction of the corresponding amino alcohols with partially chloromethylated 1 -2% cross-linked polystyrene. In the case of A, the enantioselectivity of the addition of dialkylzincs to aldehydes is higher than with the corresponding monomeric ephedrine derivatives (vide supra). Interesting insights into the mechanism of the alkylation of aldehydes by dialkylzinc reagents can be obtained from the experi-... 

---