Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Alkyl iodides, synthesis

There have been further applications of MesSil and MesSiBr as dealkylating agents for ethers, esters, phosphonic acid esters, and alcohols, the last reaction using McsSil being a useful alkyl iodide synthesis. MesSil also converts acetals into ketones or sulphoxides into sulphides, whilst a mixture of PhSiMes and I2 is capable of dealkylating esters at ca. 110°C. ... [Pg.189]

Higher alkyl ethers are prepared by treating the sodium derivative of the phaiol (made by adding the phenol to a solution of sodium ethoxide in ethyl alcohol) with the alkyl iodide or bromide (Williamson synthesis), for example ... [Pg.665]

In the total synthesis of zearaienone (451), the ester 450 was prepared by the carbonylation of the crowded aryl iodide 448. The alkyl iodide moiety in the alcohol molecule 449 is not attacked[306]. Methyl trifluoromethacrylate (453) was prepared by the carbonylation of 3,3,3-trifluoro-2-bromopropylcne (452), The carbonylation in the presence of alkylurea affords 454. which is converted into the trifluoromethyluracil 455[307],... [Pg.189]

The synthetic problem is now reduced to cyclopentanone 16. This substance possesses two stereocenters, one of which is quaternary, and its constitution permits a productive retrosynthetic maneuver. Retrosynthetic disassembly of 16 by cleavage of the indicated bond furnishes compounds 17 and 18 as potential precursors. In the synthetic direction, a diastereoselective alkylation of the thermodynamic (more substituted) enolate derived from 18 with alkyl iodide 17 could afford intermediate 16. While trimethylsilyl enol ether 18 could arise through silylation of the enolate oxygen produced by a Michael addition of a divinyl cuprate reagent to 2-methylcyclopentenone (19), iodide 17 can be traced to the simple and readily available building blocks 7 and 20. The application of this basic plan to a synthesis of racemic estrone [( >1] is described below. [Pg.162]

A completely different method of synthesis of azo compounds from diazonium salts involving radical intermediates was found by Citterio et al. (1980, 1982 c), Cit-terio and Minisci (1982), and Fontana et al. (1988). It is a new general synthesis of arylazoalkanes based on the addition of an alkyl radical to an arenediazonium ion followed by reduction of the intermediate azo radical cation adduct by a metal salt (Scheme 12-80). The preferred source for the alkyl radical R in this reaction is an alkyl iodide, which gives rise to alkyl radicals cleanly in the presence of an arenediazonium salt and a Ti3+ or Fe2+ salt as in Scheme 12-81. The overall stoichiometric equation is therefore as given in Scheme 12-82. The yields vary between 36% and 79% (with respect to alkyl iodide). [Pg.369]

Clerici and Porta reported that phenyl, acetyl and methyl radicals add to the Ca atom of the iminium ion, PhN+Me=CHMe, formed in situ by the titanium-catalyzed condensation of /V-methylanilinc with acetaldehyde to give PhNMeCHMePh, PhNMeCHMeAc, and PhNMeCHMe2 in 80% overall yield.83 Recently, Miyabe and co-workers studied the addition of various alkyl radicals to imine derivatives. Alkyl radicals generated from alkyl iodide and triethylborane were added to imine derivatives such as oxime ethers, hydrazones, and nitrones in an aqueous medium.84 The reaction also proceeds on solid support.85 A-sulfonylimines are also effective under such reaction conditions.86 Indium is also effective as the mediator (Eq. 11.49).87 A tandem radical addition-cyclization reaction of oxime ether and hydrazone was also developed (Eq. 11.50).88 Li and co-workers reported the synthesis of a-amino acid derivatives and amines via the addition of simple alkyl halides to imines and enamides mediated by zinc in water (Eq. 11.51).89 The zinc-mediated radical reaction of the hydrazone bearing a chiral camphorsultam provided the corresponding alkylated products with good diastereoselectivities that can be converted into enantiomerically pure a-amino acids (Eq. 11.52).90... [Pg.358]

The reaction of alkyl halides with metal nitrites is one of the most important methods for the preparation of nitroalkanes. As a metal nitrite, silver nitrite (Victor-Meyer reaction), potassium nitrite, or sodium nitrite (Kornblum reaction) have been frequently used. The products are usually a mixture of nitroalkanes and alkyl nitrites, which are readily separated by distillation (Eq. 2.47). The synthesis of nitro compounds by this process is well documented in the reviews, and some typical cases are listed in Table 2.3.92a Primary and secondary alkyl iodides and bromides as well as sulfonate esters give the corresponding nitro compounds in 50-70% yields on treatment with NaN02 in DMF or DMSO. Some of them are described precisely in vol 4 of Organic Synthesis. For example, 1,4-dinitrobutane is prepared in 41 -46% yield by the reaction of 1,4-diiodobutane with silver nitrite in diethyl ether.92b 1-Nitrooctane is prepared by the reaction with silver nitrite in 75-80% yield. The reaction of silver nitrite with secondary halides gives yields of nitroalkanes of about 15%, whereas with tertiary halides the yields are 0-5%.92c Ethyl a-nitrobutyrate is prepared by the reaction of ethyl a-bromobutyrate in 68-75% yield with sodium nitrite in DMF.92d Sodium nitrite is considerably more soluble in DMSO than in DMF as a consequence, with DMSO, much more concentrated solutions can be employed and this makes shorter reaction times possible.926... [Pg.17]

The metathesis reaction of fluorinated alkyl iodides with reagents such as CdMe2 is a well-established procedure for the synthesis of fluoroalkyl cadmium derivatives. A recent application of this method has allowed for the synthesis of compound 186, as shown in Scheme 22.248 This reaction is accompanied by formation of 187, which results from the insertion of the difluorocarbene in the methyl-cadmium bond. Presumably, the difluorocarbene is generated by a radicalar process involving HCF2I and CdMe2. [Pg.464]

Microwave-assisted reactions allow rapid product generation in high yield under uniform conditions. Therefore, they should be ideally suited for parallel synthesis applications. The first example of parallel reactions carried out under microwave irradiation conditions involved the nucleophilic substitution of an alkyl iodide with 60 diverse piperidine or piperazine derivatives (Scheme 4.22) [76]. Reactions were carried out in a multimode microwave reactor in individual sealed polypropylene vials using acetonitrile as solvent. Screening of the resulting 2-aminothiazole library in a herpes simplex virus-1 (HSV-1) assay led to three confirmed hits, demonstrating the potential of this method for rapid lead optimization. [Pg.74]

In this paper we disclose the syngas homologation of carboxylic acids via ruthenium homogeneous catalysis. This novel homologation reaction involves treatment of lower MW carboxylic acids with synthesis gas (C0/H2) in the presence of soluble ruthenium species, e.g., Ru02, Ru3(C0)12, H4Ru4(C0)12, coupled with iodide-containing promoters such as HI or an alkyl iodide (1). [Pg.224]

Several methods for the preparation of the parent compound in this system, tris(trimethylsilyl)phosphite, have been reported.114 118 The application of this and related reagents in reaction with alkyl halides has been reported and used for the preparation of a variety of phosphonic acid analogues of phospholipids.114119-124 Interestingly, alkyl chlorides appear to be more reactive with the silyl reagents than do alkyl iodides, a reversal of the normally observed trend with alkyl esters of the phosphorus acids. (The particular use of silyl phosphorus reagents for the synthesis of biologically significant compounds has... [Pg.47]

In the synthesis of nitronates (5), longer reaction sequences can also be successfully used. For example, Scheme 3.15 presents the synthesis of trisubsti-tuted nitronates (5) from functionalized primary AN (11) (exemplified by methyl nitroacetate) and alkyl iodides RCH2I (56). [Pg.446]

Hydrogen atom transfer implies the transfer of hydrogen atoms from the chain carrier, which is the stereo-determining step in enantioselective hydrogen atom transfer reactions. These reactions are often employed as a functional group interconversion step in the synthesis of many natural products wherein an alkyl iodide or alkyl bromide is converted into an alkane, which, in simple terms, is defined as reduction [ 19,20 ]. Most of these reactions can be classified as diastereoselective in that the selectivity arises from the substrate. Enantioselective H-atom transfer reactions can be performed in two distinct ways (1) by H-atom transfer from an achiral reductant to a radical complexed to a chiral source or alternatively (2) by H-atom transfer from a chiral reductant to a radical. [Pg.119]

With the bulky metallo-organic Pd(II) catalyst 98, on the other hand, selective formation of 99 was possible here functional groups are tolerated that would react with an Ag(I) catalyst (for example, terminal alkynes, alkyl chlorides, alkyl bromides and alkyl iodides) [59]. With l,n-diallenyl diketones (100), easily accessible by a bidirectional synthesis, up to 52-membered macrocycles (101) could be prepared in an end-group differentiating intramolecular reaction (Scheme 15.26) [60], For ring sizes lager than 12 only the E-diastereomer is formed overall yields of the macrocydes varied between 17 and 38%. Only with tethers shorter than 11 carbon atoms could the Z-diastereomer of the products be observed, a stereoisomer unknown from the intermolecular dimerization reactions of 96. [Pg.891]

Williamson synthesis org chem The synthesis of ethers utilizing an alkyl iodide and sodium alcoholate. wil-yom-san sin-tha-sas )... [Pg.402]

Poor to modest yields of trinitromethyl compounds are reported for the reaction of silver nitroform with substituted benzyl iodide and bromide substrates. Compounds like (36), (37), and (38) have been synthesized via this route these compounds have much more favourable oxygen balances than TNT and are probably powerful explosives." The authors noted that considerable amounts of unstable red oils accompanied these products. The latter are attributed to O-alkylation, a side-reaction favoured by an SnI transition state and typical of reactions involving benzylic substrates and silver salts. Further research showed that while silver nitroform favours 0-alkylation, the sodium, potassium and lithium salts favour C-alkylation." The synthesis and chemistry of 1,1,1-trinitromethyl compounds has been extensively reviewed. The alkylation of nitronate salts has been the subject of an excellent review by Nielsen." ... [Pg.13]

Tojo and co-workers reported a one-pot synthesis of alkyl nitrates from alcohols via the alkyl iodide the alcohol is treated with a mixture of iodine, triphenylphosphine and imidazole in diethyl ether-acetonitrile, and the resulting alkyl iodide is reacted in situ with silver nitrate (Equation 3.8). Reported yields for primary alcohols are good to excellent but yields are lower for secondary alcohols. [Pg.98]

SYNTHESIS and CHARACTERIZATION of O-ALKYLATED EXTRACTS. Alkylation occurs when tetrabutylanunonium hydroxide is used to promote the reaction of the alkyl iodide with the coal in tetrahydrofuran.(14) The alkylation reaction occurs primarily on acidic oxygen functionalities such as phenolic hydroxyl and carboxylic acid groups, as shown below. [Pg.142]

Alkyl hydroperoxysilanes, preparation, 783 Alkyl hydrotrioxides, structural chemistry, 132 Alkyl iodides, dioxirane oxidation, 1158 Alkyl methyl sulfonates, alkyl hydroperoxide synthesis, 673... [Pg.1441]

For example, with the Co-I-PPh catalyst, methyl acetate reacts with synthesis gas to form ethyl acetate. All of the primary and secondary alcohols tested (C thru C ) decompose during long-term operation. The major decomposition products include aldehydes, alkyl iodides, and ethers. Ketones are readily hydrogenated and the resulting alcohols decompose. Good solvents in terms of stability are diphenyl ether and alkanes. The acetaldehyde rate is somewhat low (1.8 M/hr) in diphenyl ether, and the selectivity is low in alkanes. In addition, these solvents do not have good solubility properties, especially in product refining. [Pg.131]

Adolph Wurtz, 1817—1884. Professor of chemistry at the ficole de Medecine in Pans. Discoverer of methyl and ethyl amines and the synthesis of hydrocarbons from alkyl iodides and sodium. He studied the oxidation products of the glycols and the homologs of lactic acid The proof of the elementary nature of gallium was demonstrated in his laboratory by Lecoq de Boisbaudran. [Pg.673]


See other pages where Alkyl iodides, synthesis is mentioned: [Pg.281]    [Pg.281]    [Pg.200]    [Pg.315]    [Pg.82]    [Pg.193]    [Pg.296]    [Pg.17]    [Pg.36]    [Pg.665]    [Pg.181]    [Pg.289]    [Pg.317]    [Pg.317]    [Pg.51]    [Pg.206]    [Pg.385]    [Pg.296]    [Pg.403]    [Pg.313]    [Pg.9]    [Pg.296]    [Pg.330]    [Pg.36]    [Pg.107]    [Pg.361]    [Pg.373]   
See also in sourсe #XX -- [ Pg.184 ]




SEARCH



Alkyl iodides

Alkyl synthesis

Iodides, synthesis

Synthesis alkylation

© 2024 chempedia.info