Aldols, also

Aldol Also called the Four-step process. A process for converting acetylene to synthetic rubber, used on a large scale in Germany during World War II. A four-step synthesis converted the acetylene to butadiene, and this was then polymerised by the Buna process. The four steps were ... 

It is well known that the dehydration of aldol to crotonaldehyde is readily effected in the presence of a trace of mineral acid. Since aldols also undergo dehydration in the presence of base, there may be the possibility of a base-catalyzed dehydration ... 

Ketones, in which one alkyl group R is sterically demanding, only give the trans-enolate on deprotonation with LDA at —12°C (W.A. Kleschick, 1977, see p. 60f.). Ketones also enolize regioseiectively towards the less substituted carbon, and stereoselectively to the trans-enolate, if the enolates are formed by a bulky base and trapped with dialkyl boron triflates, R2BOSO2CF3, at low temperatures (D A. Evans, 1979). Both types of trans-enolates can be applied in stereoselective aldol reactions (see p. 60f.). 

Alkylation of aldol type educts, e.g., /3-hydroxy esters, using LDA and alkyl halides leads stereoselectively to erythro substitution. The erythro threo ratio of the products is of the order of 95 5. Allylic and benzylic bromides can also be used. The allyl groups can later be ozonolysed to gjve aldehydes, and many interesting oligofunctional products with two adjacent chiral centres become available from chiral aldol type educts (G. Prater, 1984 D. Seebach, 1984 see also M. Nakatsuka, 1990, p. 5586). 

Aldol additions and ester condensations have always been and still are the most popular reactions for the formation of carbon-carbon bonds (A.T. Nielsen, 1968). The earbonyl group acts as an a -synthon, the enoi or enolate as a d -synthon. Both reactions will be treated together here, and arguments, which are given for aldol additions, are also valid for ester condensations. Many famous name reactions belong to this category ). The products of aldol additions may be either /J-hydroxy carbonyl compounds or, after dehydration, or, -unsaturated carbonyl compounds. 

There also exists an acidregioselective condensation of the aldol type, namely the Mannich reaction (B. Reichert, 1959 H. Hellmann, 1960 see also p. 291f.). The condensation of secondary amines with aldehydes yields Immonium salts, which react with ketones to give 3-amino ketones (=Mannich bases). Ketones with two enolizable CHj-groupings may form 1,5-diamino-3-pentanones, but monosubstitution products can always be obtained in high yield. Unsymmetrical ketones react preferentially at the most highly substituted carbon atom. Sterical hindrance can reverse this regioselectivity. Thermal elimination of amines leads to the a,)3-unsaturated ketone. Another efficient pathway to vinyl ketones starts with the addition of terminal alkynes to immonium salts. On mercury(ll) catalyzed hydration the product is converted to the Mannich base (H. Smith, 1964). 

Stereoselectivities of 99% are also obtained by Mukaiyama type aldol reactions (cf. p. 58) of the titanium enolate of Masamune s chired a-silyloxy ketone with aldehydes. An excess of titanium reagent (s 2 mol) must be used to prevent interference by the lithium salt formed, when the titanium enolate is generated via the lithium enolate (C. Siegel, 1989). The mechanism and the stereochemistry are the same as with the boron enolate. 

The Michael reaction is of central importance here. This reaction is a vinylogous aldol addition, and most facts, which have been discussed in section 1.10, also apply here the reaction is catalyzed by acids and by bases, and it may be made regioselective by the choice of appropriate enol derivatives. Stereoselectivity is also observed in reactions with cyclic educts. An important difference to the aldol addition is, that the Michael addition is usually less prone to sterical hindrance. This is evidenced by the two examples given below, in which cyclic 1,3-diketones add to o, -unsaturated carbonyl compounds (K. Hiroi, 1975 H, Smith, 1964). 

Cydopentane reagents used in synthesis are usually derived from cyclopentanone (R.A. Ellison, 1973). Classically they are made by base-catalyzed intramolecular aldol or ester condensations (see also p. 55). An important example is 2-methylcydopentane-l,3-dione. It is synthesized by intramolecular acylation of diethyl propionylsucdnate dianion followed by saponification and decarboxylation. This cyclization only worked with potassium t-butoxide in boiling xylene (R. Bucourt, 1965). Faster routes to this diketone start with succinic acid or its anhydride. A Friedel-Crafts acylation with 2-acetoxy-2-butene in nitrobenzene or with pro-pionyl chloride in nitromethane leads to acylated adducts, which are deacylated in aqueous acids (V.J. Grenda, 1967 L.E. Schick, 1969). A new promising route to substituted cyclopent-2-enones makes use of intermediate 5-nitro-l,3-diones (D. Seebach, 1977). 

In an intramolecular aldol condensation of a diketone many products are conceivable, since four different ends can be made. Five- and six-membered rings, however, wUl be formed preferentially. Kinetic or thermodynamic control or different acid-base catalysts may also induce selectivity. In the Lewis acid-catalyzed aldol condensation given below, the more substituted enol is formed preferentially (E.J. Corey, 1963 B, 1965B). 

In the last fifteen years macrolides have been the major target molecules for complex stereoselective total syntheses. This choice has been made independently by R.B. Woodward and E.J. Corey in Harvard, and has been followed by many famous fellow Americans, e.g., G. Stork, K.C. Nicolaou, S. Masamune, C.H. Heathcock, and S.L. Schreiber, to name only a few. There is also no other class of compounds which is so suitable for retrosynthetic analysis and for the application of modem synthetic reactions, such as Sharpless epoxidation, Noyori hydrogenation, and stereoselective alkylation and aldol reactions. We have chosen a classical synthesis by E.J. Corey and two recent syntheses by A.R. Chamberlin and S.L. Schreiber as examples. 

The synthesis of cyclohexenone derivatives by Michael addition followed by intramolec ular aldol condensation is called the Robinson annulation, after Sir Robert Robinson who popularized its use By annulatwn we mean the building of a ring onto some start mg molecule (The alternative spelling annelation is also often used)... 

Cleavage reactions of carbohydrates also occur on treatment with aqueous base for prolonged periods as a consequence of base catalyzed retro aldol reactions As pointed out m Section 18 9 aldol addition is a reversible process and (3 hydroxy carbonyl com pounds can be cleaved to an enolate and either an aldehyde or a ketone... 

The base-catalyzed reaction of acetaldehyde with excess formaldehyde [50-00-0] is the commercial route to pentaerythritol [115-77-5]. The aldol condensation of three moles of formaldehyde with one mole of acetaldehyde is foUowed by a crossed Cannizzaro reaction between pentaerythrose, the intermediate product, and formaldehyde to give pentaerythritol (57). The process proceeds to completion without isolation of the intermediate. Pentaerythrose [3818-32-4] has also been made by condensing acetaldehyde and formaldehyde at 45°C using magnesium oxide as a catalyst (58). The vapor-phase reaction of acetaldehyde and formaldehyde at 475°C over a catalyst composed of lanthanum oxide on siHca gel gives acrolein [107-02-8] (59). 

Aldehydes fiad the most widespread use as chemical iatermediates. The production of acetaldehyde, propionaldehyde, and butyraldehyde as precursors of the corresponding alcohols and acids are examples. The aldehydes of low molecular weight are also condensed in an aldol reaction to form derivatives which are important intermediates for the plasticizer industry (see Plasticizers). As mentioned earlier, 2-ethylhexanol, produced from butyraldehyde, is used in the manufacture of di(2-ethylhexyl) phthalate [117-87-7]. Aldehydes are also used as intermediates for the manufacture of solvents (alcohols and ethers), resins, and dyes. Isobutyraldehyde is used as an intermediate for production of primary solvents and mbber antioxidants (see Antioxidaisits). Fatty aldehydes Cg—used in nearly all perfume types and aromas (see Perfumes). Polymers and copolymers of aldehydes exist and are of commercial significance. 

Ahphatic aldehydes can also be prepared in moderate yields by distilling the aldehyde from the mixture rapidly to avoid aldol addition or a Cannizzaro reaction (53). 

DIBK can be produced by the hydrogenation of phorone which, in turn, is produced by the acid-catalyzed aldol condensation of acetone. It is also a by-product in the manufacture of methyl isobutyl ketone. Diisobutyl ketone ( 1.37/kg, October 1994) is produced in the United States by Union Carbide (Institute, West Virginia) and Eastman (Kingsport, Teimessee) (47), and is mainly used as a coating solvent. Catalytic hydrogenation of diisobutyl ketone produces the alcohol 2,6-dimethyl-4-heptanol [108-82-7]. 

Lithium Iodide. Lithium iodide [10377-51 -2/, Lil, is the most difficult lithium halide to prepare and has few appHcations. Aqueous solutions of the salt can be prepared by carehil neutralization of hydroiodic acid with lithium carbonate or lithium hydroxide. Concentration of the aqueous solution leads successively to the trihydrate [7790-22-9] dihydrate [17023-25-5] and monohydrate [17023-24 ] which melt congmendy at 75, 79, and 130°C, respectively. The anhydrous salt can be obtained by carehil removal of water under vacuum, but because of the strong tendency to oxidize and eliminate iodine which occurs on heating the salt ia air, it is often prepared from reactions of lithium metal or lithium hydride with iodine ia organic solvents. The salt is extremely soluble ia water (62.6 wt % at 25°C) (59) and the solutions have extremely low vapor pressures (60). Lithium iodide is used as an electrolyte ia selected lithium battery appHcations, where it is formed in situ from reaction of lithium metal with iodine. It can also be a component of low melting molten salts and as a catalyst ia aldol condensations. 

A number of other valuable aroma chemicals can be isolated from essential oils, eg, eugenol from clove leaf oil, which can also, on treatment with strong caustic, be isomerked to isoeugenol, which on further chemical treatment can be converted to vanillin (qv). Sometimes the naturally occurring component does not requke prior isolation or concentration, as in the case of cinnamaldehyde in cassia oil which, on dkect treatment of the oil by a retro-aldol reaction, yields natural ben2aldehyde (qv). This product is purified by physical means. 

Aldol reaction of campholenic aldehyde with propionic aldehyde yields the intermediate conjugated aldehyde, which can be selectively reduced to the saturated alcohol with a sandalwood odor. If the double bond in the cyclopentene ring is also reduced, the resulting product does not have a sandalwood odor (161). Reaction of campholenic aldehyde with -butyraldehyde followed by reduction of the aldehyde group gives the aHyUc alcohol known commercially by one manufacturer as Bacdanol [28219-61 -6] (82). 

Citral reacts in an aldol condensation using excess acetone and a basic catalyst, usually sodium hydroxide. The excess acetone can be recovered for recycle. The resulting intermediate pseudoionone [141-10-6] (83) after cyclization with phosphoric acid gives predominantly a-ionone [127-41 -3] (84), which is the isomer commercially important in flavors and fragrances. A hydrocarbon solvent is generally necessary in order to get high yields. P-Ionone [14901-07-6] (85) is the predominant isomer if sulfuric acid is used as the catalyst but lower temperature than that for cyclization to a-ionone is required. y-Ionone [79-6-5] (86) is also produced. 

In the condensation of 2-butanone with citral, if the reaction temperature is kept at 0—10°C, higher yields of the isomethyl pseudoionones, which are the more thermodynamically stable isomers, are obtained. The aldol iatermediates have more time to equilibrate to the more stable isomers at the lower temperature. The type of base used and a cosolvent such as methanol are also very important ia getting a high yield of the isomethyl pseudoionones (168). 

Isobutyraldehyde also undergoes consecutive aldol and Tischenko condensations to give 2,2,4-trimethyl-l,3-pentanediolmonoisobutyrate [25265-77-4] (Texanol, Filmer IBT), alternatively prepared by the esterification of TMPD with isobutyric acid. 

Methyl amyl ketone, derived from the crossed aldol condensation of -butyraldehyde and acetone, is used predominandy as a high soHds coatings solvent. It is also employed as a replacement for the very toxic 2-ethoxyethyl acetate [111 -15-9J. 

The a-ionization of 7-methylpteridines can also be utilized in aldol-type condensation reactions. 7-Methyl-pterin and -lumazine and 2,4-diaminopteridine condense readily in aqueous base with aromatic aldehydes to afford 7-alkylidenepteridines (77JOC2951). A Claisen condensation requires the protection of the acidic hydrogens of the amide bonds. 

Isatin (190) is a compound with interesting chemistry. It can be iV-acetylated with acetic anhydride, iV-methylated via its sodium or potassium salt and O-methylated via its silver salt. Oxidation of isatins with hydrogen peroxide in methanolic sodium methoxide yields methyl anthranilates (81AG(E)882>. In moist air, O-methylisatin (191) forms methylisatoid (192). Isatin forms normal carbonyl derivatives (193) with ketonic reagents such as hydroxylamine and phenylhydrazine and the reactive 3-carbonyl group also undergoes aldol condensation with active methylene compounds. Isatin forms a complex derivative, isamic acid (194), with ammonia (76JCS(P1)2004). 

Enolates can also serve as carbon nucleophiles in carbonyl addition reactions. The addition reaction of enolates with carbonyl compounds is of very broad scope and is of great synthetic importance. Essentially all of the enolates considered in Chapter 7 are capable of adding to carbonyl groups. The reaction is known as the generalized aldol addition. 

For the other broad category of reaction conditions, the reaction proceeds under conditions of thermodynamic control. This can result from several factors. Aldol condensations can be effected for many compounds using less than a stoichiometric amount of base. Under these conditions, the aldol reaction is reversible, and the product ratio will be determined by the relative stability of the various possible products. Conditions of thermodynamic control also permit equilibration among all the enolates of the nucleophile. The conditions that permit equilibration include higher reaction temperatures, protic solvents, and the use of less tightly coordinating cations. 

---