Aldol reactions compounds

SoUadid has introduced a-sulfinyl acetates as reagents for asymmetric aldol reactions.Compound (211) is prepared in good optical purity from the menthyl ester of p-tolylsulfinic acid. The magnesium enolate of (211), prepared by reaction of the sulfrnyl ester with r-butylmagnesium bromide, reacts with aldehydes and ketones to give diastereomeric mixtures of a-sulfinyl-3-hydroxy esters (Scheme 13). No... 

Compound 34 was transformed to fragment C15-C21 in six steps. The polyketide structural motif of this fragment suggested a second asymmetric aldol reaction. Compound 34 was transformed to the... 

The higjily water-soluble dienophiles 2.4f and2.4g have been synthesised as outlined in Scheme 2.5. Both compounds were prepared from p-(bromomethyl)benzaldehyde (2.8) which was synthesised by reducing p-(bromomethyl)benzonitrile (2.7) with diisobutyl aluminium hydride following a literature procedure2.4f was obtained in two steps by conversion of 2.8 to the corresponding sodium sulfonate (2.9), followed by an aldol reaction with 2-acetylpyridine. In the preparation of 2.4g the sequence of steps had to be reversed Here, the aldol condensation of 2.8 with 2-acetylpyridine was followed by nucleophilic substitution of the bromide of 2.10 by trimethylamine. Attempts to prepare 2.4f from 2.10 by treatment with sodium sulfite failed, due to decomposition of 2.10 under the conditions required for the substitution by sulfite anion. 

In the last fifteen years macrolides have been the major target molecules for complex stereoselective total syntheses. This choice has been made independently by R.B. Woodward and E.J. Corey in Harvard, and has been followed by many famous fellow Americans, e.g., G. Stork, K.C. Nicolaou, S. Masamune, C.H. Heathcock, and S.L. Schreiber, to name only a few. There is also no other class of compounds which is so suitable for retrosynthetic analysis and for the application of modem synthetic reactions, such as Sharpless epoxidation, Noyori hydrogenation, and stereoselective alkylation and aldol reactions. We have chosen a classical synthesis by E.J. Corey and two recent syntheses by A.R. Chamberlin and S.L. Schreiber as examples. 

Thiazolecarboxaldehydes exhibit many reactions typical of aldehydes. However, they give no aldolization reaction (no a-hydrogen), but they do react with different compounds such as acetic anhydride, hippuric acid, acetylglycine, and so for (37, 101, 102). Thus 2-phenyl-4-fonnylthiazole (31) mixed with hippuric acid and treated with AcOa and anhydrous NaOAc gives the azalactone (32) (Scheme 32). 

The 0X0 and aldol reactions may be combined if the cobalt catalyst is modified by the addition of organic—soluble compounds of 2inc or other metals. Thus, propylene, hydrogen, and carbon monoxide give a mixture of aldehydes and 2-ethylhexenaldehyde [123-05-7] which, on hydrogenation, yield the corresponding alcohols. 

Formaldehyde condenses with itself in an aldol-type reaction to yield lower hydroxy aldehydes, hydroxy ketones, and other hydroxy compounds the reaction is autocatalytic and is favored by alkaline conditions. Condensation with various compounds gives methylol (—CH2OH) and methylene (=CH2) derivatives. The former are usually produced under alkaline or neutral conditions, the latter under acidic conditions or in the vapor phase. In the presence of alkahes, aldehydes and ketones containing a-hydrogen atoms undergo aldol reactions with formaldehyde to form mono- and polymethylol derivatives. Acetaldehyde and 4 moles of formaldehyde give pentaerythritol (PE) ... 

For the other broad category of reaction conditions, the reaction proceeds under conditions of thermodynamic control. This can result from several factors. Aldol condensations can be effected for many compounds using less than a stoichiometric amount of base. Under these conditions, the aldol reaction is reversible, and the product ratio will be determined by the relative stability of the various possible products. Conditions of thermodynamic control also permit equilibration among all the enolates of the nucleophile. The conditions that permit equilibration include higher reaction temperatures, protic solvents, and the use of less tightly coordinating cations. 

The fluoride anion has a pronounced catalytic effect on the aldol reaction between enol silyl ethers and carbonyl compounds [13] This reacbon proceeds at low temperature under the influence of catalytic amounts (5-10 mol %) of tetra-butylammonium fluoride, giving the aldol silyl ethers in high yields (equation 11). 

Cleavage reactions of car bohydrates also occur on treatment with aqueous base for prolonged periods as a consequence of base-catalyzed retro-aldol reactions. As pointed out in Section 18.9, aldol addition is a reversible process, and (3-hydroxy carbonyl compounds can be cleaved to an enolate and either an aldehyde or a ketone. 

The last isomer, the so-called aldotripiperideine (185), is obtained by the action of acid catalysts on a-tripiperideine at its boiling point (298,299), or in aqueous solution at pH 9.2 and 100°C. Further aldol reaction between tetrahydroanabasine and A -piperideine obviously occurs. Hydrogenolysis of this compound gives dihydroaldotripiperideine (186) which is convertible into matridine (187), a reduction product of the alkaloid matrine. 

A route to pyridines which involves an isolated 1,5-dicarbonyl compound, has been reported. Aldol reaction of enone 57 with methylketone 58 generated 1,5-diketone 59. When this was submitted to the reaction conditions for a Krohnke reaction, thiopyridine 60 was isolated. 

Chiral salen chromium and cobalt complexes have been shown by Jacobsen et al. to catalyze an enantioselective cycloaddition reaction of carbonyl compounds with dienes [22]. The cycloaddition reaction of different aldehydes 1 containing aromatic, aliphatic, and conjugated substituents with Danishefsky s diene 2a catalyzed by the chiral salen-chromium(III) complexes 14a,b proceeds in up to 98% yield and with moderate to high ee (Scheme 4.14). It was found that the presence of oven-dried powdered 4 A molecular sieves led to increased yield and enantioselectivity. The lowest ee (62% ee, catalyst 14b) was obtained for hexanal and the highest (93% ee, catalyst 14a) was obtained for cyclohexyl aldehyde. The mechanism of the cycloaddition reaction was investigated in terms of a traditional cycloaddition, or formation of the cycloaddition product via a Mukaiyama aldol-reaction path. In the presence of the chiral salen-chromium(III) catalyst system NMR spectroscopy of the crude reaction mixture of the reaction of benzaldehyde with Danishefsky s diene revealed the exclusive presence of the cycloaddition-pathway product. The Mukaiyama aldol condensation product was prepared independently and subjected to the conditions of the chiral salen-chromium(III)-catalyzed reactions. No detectable cycloaddition product could be observed. These results point towards a [2-i-4]-cydoaddition mechanism. 

The addition of the a-carbon of an enolizable aldehyde or ketone 1 to the carbonyl group of a second aldehyde or ketone 2 is called the aldol reaction It is a versatile method for the formation of carbon-carbon bonds, and is frequently used in organic chemistry. The initial reaction product is a /3-hydroxy aldehyde (aldol) or /3-hydroxy ketone (ketol) 3. A subsequent dehydration step can follow, to yield an o ,/3-unsaturated carbonyl compound 4. In that case the entire process is also called aldol condensation. 

If the initially formed /3-hydroxy carbonyl compound 3 still has an a-hydrogen, a subsequent elimination of water can take place, leading to an o ,/3-unsaturated aldehyde or ketone 4. In some cases the dehydration occurs already under the aldol reaction conditions in general it can be carried out by heating in the presence of acid ... 

From a mixture of two different aldehydes, each with a-hydrogens, four different aldols can be formed—two aldols from reaction of molecules of the same aldehyde -I- two crossed aldol products not even considering possible stereoisomers (see below). By taking into account the unsaturated carbonyl compounds which could be formed by dehydration from the aldols, eight different reaction products might be obtained, thus indicating that the aldol reaction may have preparative limitations. 

Especially with the ordinary aldol reaction a number of side reactions can be observed, as a result of the high reactivity of starting materials and products. For instance, the a ,/3-unsaturated carbonyl compounds 4 can undergo further aldol reactions by reacting as vinylogous components. In addition compounds 4 are potential substrates for the Michael reaction. 

Besides the aldol reaction in the true sense, there are several other analogous reactions, where some enolate species adds to a carbonyl compound. Such reactions are often called aldol-type reactions the term aldol reaction is reserved for the reaction of aldehydes and ketones. 

The term Knoevenagel reaction however is used also for analogous reactions of aldehydes and ketones with various types of CH-acidic methylene compounds. The reaction belongs to a class of carbonyl reactions, that are related to the aldol reaction. The mechanism is formulated by analogy to the latter. The initial step is the deprotonation of the CH-acidic methylene compound 2. Organic bases like amines can be used for this purpose a catalytic amount of amine usually suffices. A common procedure, that uses pyridine as base as well as solvent, together with a catalytic amount of piperidine, is called the Doebner modification of the Knoevenagel reaction. 

The overall process is the addition of a CH-acidic compound to the carbon-carbon double bond of an o ,/3-unsaturated carbonyl compound. The Michael reaction is of particular importance in organic synthesis for the construction of the carbon skeleton. The above CH-acidic compounds usually do not add to ordinary carbon-carbon double bonds. Another and even more versatile method for carbon-carbon bond formation that employs enolates as reactive species is the aldol reaction. 

Certain starting materials may give rise to the non-selective formation of regioisomeric enolates, leading to a mixture of isomeric products. Furthermore a ,/3-unsaturated carbonyl compounds tend to polymerize. The classical Michael procedure (i.e. polar solvent, catalytic amount of base) thus has some disadvantages, some of which can be avoided by use of preformed enolates. The CH-acidic carbonyl compound is converted to the corresponding enolate by treatment with an equimolar amount of a strong base, and in a second step the a ,/3-unsaturated carbonyl compound is added—often at low temperature. A similar procedure is applied for variants of the aldol reaction. 

The stereochemical outcome of the Michael addition reaction with substituted starting materials depends on the geometry of the a ,/3-unsaturated carbonyl compound as well as the enolate geometry a stereoselective synthesis is possible. " Diastereoselectivity can be achieved if both reactants contain a stereogenic center. The relations are similar to the aldol reaction, and for... 

Jager and coworkers have used the TBAF catalyzed-stereoselective niho-aldol reaction for the synthesis of cyclic amino alcohols such as iminopolyols, imino sugars, and cyclic amino acids. They are important classes of compounds and have the potential utility as anh-diabetic. 

Aldol reactions, Like all carbonyl condensations, occur by nucleophilic addition of the enolate ion of the donor molecule to the carbonyl group of the acceptor molecule. The resultant tetrahedral intermediate is then protonated to give an alcohol product (Figure 23.2). The reverse process occurs in exactty the opposite manner base abstracts the -OH hydrogen from the aldol to yield a /3-keto alkoxide ion, which cleaves to give one molecule of enolate ion and one molecule of neutral carbonyl compound. 

Problem 23.1 Predict the aldol reaction product of the following compounds ... 

On the other hand, carbonyl condensation reactions require only a catalytic amount of a relatively weak base rather than a full equivalent so that a small amount of enolate ion is generated in the presence of unreacted carbonyl compound. Once a condensation has occurred, the basic catalyst is regenerated. To carry out an aldol reaction on propanal, for instance, we might dissolve the aldehyde in methanol, add 0.05 equivalent of sodium methoxide, and then warm the mixture to give the aldol product. 

The reaction conditions needed for aldol dehydration are often only a bit more vigorous (slightly higher temperature, for instance) than the conditions needed for the aldol formation itself. As a result, conjugated enones are usually obtained directly from aldol reactions without isolating the intermediate jS-hydroxy carbonyl compounds. 

Problem 23.7 Show how you would synthesize the following compound using an aldol reaction ... 

Problem 23.8 Which of the following compounds can probably be prepared by a mixed aldol reaction Show the reactants you would use in each case. 

The aldol reactions we ve seen thus far have all been intermolecular, meaning that they have taken place between two different molecules. When certain r/zcar-bonyl compounds are treated with base, however, an mtramolecular aldol reaction can occur, leading to the formation of a cyclic product. For example, base treatment of a 1,4-diketone such as 2,5-hexanedione yields a cyclopcntenone... 

StepS 9-1° of F Sure 29-7 Dehydration and Dephosphorylation Like mos /3-hydroxy carbonyl compounds produced in aldol reactions, 2-phospho glvcerate undergoes a ready dehydration in step 9 by an ElcB mechanism (Section 23.3). The process is catalyzed by enolase, and the product i... 

Aldol reaction (Section 23.1) The carbonyl condensation reaction of an aldehyde or ketone to give a jS-hydroxy carbonyl compound. 

The issue of stereochemistry, on the other hand, is more ambiguous. A priori, an aldol condensation between compounds 3 and 4 could proceed with little or no selectivity for a particular aldol dia-stereoisomer. For the desired C-7 epimer (compound 2) to be produced preferentially, the crucial aldol condensation between compounds 3 and 4 would have to exhibit Cram-Felkin-Anh selectivity22 23 (see 3 + 4 - 2, Scheme 9). In light of observations made during the course of Kishi s lasalocid A synthesis,12 there was good reason to believe that the preferred stereochemical course for the projected aldol reaction between intermediates 3 and 4 would be consistent with a Cram-Felkin-Anh model. Thus, on the basis of the lasalocid A precedent, it was anticipated that compound 2 would emerge as the major product from an aldol coupling of intermediates 3 and 4. 

We now tum our attention to the C21-C28 fragment 158. Our retrosynthetic analysis of 158 (see Scheme 42) identifies an expedient synthetic pathway that features the union of two chiral pool derived building blocks (161+162) through an Evans asymmetric aldol reaction. Aldehyde 162, the projected electrophile for the aldol reaction, can be crafted in enantiomerically pure form from commercially available 1,3,4,6-di-O-benzylidene-D-mannitol (183) (see Scheme 45). As anticipated, the two free hydroxyls in the latter substance are methylated smoothly upon exposure to several equivalents each of sodium hydride and methyl iodide. Tetraol 184 can then be revealed after hydrogenolysis of both benzylidene acetals. With four free hydroxyl groups, compound 184 could conceivably present differentiation problems nevertheless, it is possible to selectively protect the two primary hydroxyl groups in 184 in... 

Within this section, the term aldol reaction includes additions of enols and enolates to carbonyl compounds. This section concentrates on aldol additions which deliver nonracemic, /i-hydroxycarbonyl compounds. The chiral information can be located ... 

---