Aldehydes vinyl acetates

T[[dotb]he nature of the initial attack by the water (eq. 10) is a matter of some controversy (205,206). Stereochemical and kinetic studies of model systems have been reported that support trans addition of external water (207,208) or internal addition of cis-coordinated water (209), depending on the particular model system under study. Other paHadium-cataly2ed oxidations of olefins ia various oxygen donor solvents produce a variety of products including aldehydes (qv), ketones (qv), vinyl acetate, acetals, and vinyl ethers (204). However the product mixtures are complex and very sensitive to conditions. 

Vinyl acetal polymers are made by the acid-cataly2ed acetalization of poly(viQyl alcohol) [9002-89-5] with aldehydes (1). 

The thermal glass-transition temperatures of poly(vinyl acetal)s can be determined by dynamic mechanical analysis, differential scanning calorimetry, and nmr techniques (31). The thermal glass-transition temperature of poly(vinyl acetal) resins prepared from aliphatic aldehydes can be estimated from empirical relationships such as equation 1 where OH and OAc are the weight percent of vinyl alcohol and vinyl acetate units and C is the number of carbons in the chain derived from the aldehyde. The symbols with subscripts are the corresponding values for a standard (s) resin with known parameters (32). The formula accurately predicts that resin T increases as vinyl alcohol content increases, and decreases as vinyl acetate content and aldehyde carbon chain length increases. 

Often a chain-transfer agent is added to vinyl acetate polymerizations, whether emulsion, suspension, solution, or bulk, to control the polymer molecular weight. Aldehydes, thiols, carbon tetrachloride, etc, have been added. Some emulsion procedures call for the recipe to include a quantity of preformed PVAc emulsion and sometimes antifoamers must be added (see Foams). 

Chain transfer also occurs to the emulsifying agents, leading to their permanent iacorporation iato the product. Chain transfer to aldehydes, which may be formed as a result of the hydrolysis of the vinyl acetate monomer, tends to lower the molecular weight and slow the polymerisation rate because of the lower activity of the radical that is formed. Thus, the presence of acetaldehyde condensates as a poly(vinyl alcohol) impurity strongly retards polymerisation (91). Some of the initiators such as lauryl peroxide are also chain-transfer agents and lower the molecular weight of the product. 

Treatment of poly(vinyl alcohol) with aldehydes and ketones leads to the formation of poly(vinyl acetals) and poly(vinyl ketals), of which only the former products are of any commercial significance Figure 14.7). 

The products are amorphous resins whose rigidity and softening point depend on the aldehyde used. Poly(vinyl butyral), with the larger side chain, is softer than poly(vinyl formal). Since the reaction between the aldehyde and the hydroxyl groups occurs at random, some hydroxyl groups become isolated and are incapable of reaction. A poly(vinyl acetal) molecule will thus contain ... 

It has been shown52 that under similar conditions reduction of the nitrile groups in cellulose ethyl cyanate and of those in the copolymer of vinylidene cyanide with vinyl acetate, proceed simultaneously in two directions with the formation of aldehyde and amine groups. g+ g ... 

Another route to the diol monomer is provided by hydroformylation of allyl alcohol or allyl acetate. Allyl acetate can be produced easily by the palladium-catalyzed oxidation of propylene in the presence of acetic acid in a process similar to commercial vinyl acetate production. Both cobalt-and rhodium-catalyzed hydroformylations have received much attention in recent patent literature (83-86). Hydroformylation with cobalt carbonyl at 140°C and 180-200 atm H2/CO (83) gave a mixture of three aldehydes in 85-99% total yield. 

Wacker (1) A general process for oxidizing aliphatic hydrocarbons to aldehydes or ketones by the use of oxygen, catalyzed by an aqueous solution of mixed palladium and copper chlorides. Ethylene is thus oxidized to acetaldehyde. If the reaction is conducted in acetic acid, the product is vinyl acetate. The process can be operated with the catalyst in solution, or with the catalyst deposited on a support such as activated caibon. There has been a considerable amount of fundamental research on the reaction mechanism, which is believed to proceed by alternate oxidation and reduction of the palladium ... 

Diketones. Some years ago Heiba and Dessau reported that Mn(OAc), promotes oxidative addition of isopropenyl acetate to ketones to give 1,4-diketones in 20-35% yield (6, 356). Use of CAN as the oxidant results in higher yields (65-80%) and a regioselective reaction at the more substituted a-position of the ketone.1 Use of vinyl acetate results in the dimethyl acetal of 4-oxo aldehydes. 

Enol esters are distinct from other esters not because of a particular stability or lability toward hydrolases, but due to their hydrolysis releasing a ghost alcohol (an enol), which may immediately tautomerize to the corresponding aldehyde or ketone. A well-studied example is that of vinyl acetate (CH3-C0-0-CH=CH2), a xenobiotic of great industrial importance that, upon hydrolysis, liberates acetic acid (CH3-CO-OH) and acetaldehyde (CH3-CHO), the stable tautomer of vinyl alcohol [25], The results of two studies are compiled in Table 7.1, and demonstrate that vinyl acetate is a very good substrate of carboxylesterase (EC 3.1.1.1) but not of acetylcholinesterase (EC 3.1.1.7) or cholinesterase (EC 3.1.1.8). The presence of carboxylesterase in rat plasma but not in human plasma explains the difference between these two preparations, although the different experimental conditions in the two studies make further interpretation difficult. 

Reaction of poly(vinyl alcohol) with an aldehyde yields the corresponding poly(vinyl acetal) ... 

Alternatively, acetaldehyde and acetic anhydride are fed directly to the cracking reactor where the same sulfonic acid can catalyze the condensation of the aldehvde-anhydride mixture to EDA and the subsequent thermal elimination forming vinyl acetate. The best results are obtained when acetic anhydride is present as solvent to inhibit the competitive elimination to acetaldehyde and anhydride (see reverse of equation 2). Aldehyde degradation reactions are minimal under these conditions. 

Hydrolase-catalyzed acylation can be used to purify a diastereo- and enantiomerically enriched product. For example dimethylzinc addition to the racemic aldehyde 77 furnishes the racemic phenylsulfanylbutanol 78 (Scheme 4.29) in a 95/5 (2R, 3R )/(2R, 3S )-mtio. When this is treated with Chirazyme L2 (CALB) and vinyl acetate in heptane it is resolved with a high E-value (>400) [91]. However the diastereomeric ratio in the remaining substrate and produced ester is virtually unchanged. To circumvent the problematic contamination with the undesired diastereomers, enantiomerically enriched aldehyde 77 was reacted with dimethyl-zinc to furnish one major stereoisomer of 78 contaminated with a small amount of a mixture of the other three (Scheme 4.29). Because the two major contaminants had the opposite configuration at position 2 relative to the major product, these contaminants were efficiently removed from the major product and the trace byproduct by treatment with the 2R-selective Chirazyme L2 (CALB) and vinyl acetate in heptane to furnish virtually diastereo- and enantiomerically pure acetate (2R,3R)-79 or the alcohol (2S,3S)-78 (Scheme 4.29) [91]. 

The synthesis of poly(vinyl acetals) (252) represents another example of generating a heterocycle, in this case the 1,3-dioxane nucleus, by application of a polymer modification reaction. Generally, the polymer modified is poly(vinyl alcohol) (180) or one of its copolymers. The 1,3-dioxane ring is generated (Scheme 122) by an acid-catalyzed acetalization reaction with an aldehyde, although ketones have also been reacted. A review (71MI11102) is available covering synthesis, properties and applications of the two most common and industrially important poly(vinyl acetals), poly(vinyl butyral) and poly(vinyl formal), as well as many other functional aldehydes that have been attached. 

The hydroformylation of ally and vinyl acetals yields some useful intermediates. Allyl acetate undergoes partial double bond migration prior to hydroformylation with a cobalt catalyst in the absence of phosphine (equation 20).2-5 Rhodium catalysts containing chelating phosphines are more selective to the linear aldehyde.31... 

---