Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Aldehydes asymmetric addition

Meyers has demonstrated that chiral oxazolines derived from valine or rert-leucine are also effective auxiliaries for asymmetric additions to naphthalene. These chiral oxazolines (39 and 40) are more readily available than the methoxymethyl substituted compounds (3) described above but provide comparable yields and stereoselectivities in the tandem alkylation reactions. For example, addition of -butyllithium to naphthyl oxazoline 39 followed by treatment of the resulting anion with iodomethane afforded 41 in 99% yield as a 99 1 mixture of diastereomers. The identical transformation of valine derived substrate 40 led to a 97% yield of 42 with 94% de. As described above, sequential treatment of the oxazoline products 41 and 42 with MeOTf, NaBKi and aqueous oxalic acid afforded aldehydes 43 in > 98% ee and 90% ee, respectively. These experiments demonstrate that a chelating (methoxymethyl) group is not necessary for reactions to proceed with high asymmetric induction. [Pg.242]

Metal-catalyzed asymmetric addition of dialkyl phosphites to aldehydes (Pudovik reaction) has been extensively developed since the initial reports in 1993 by Shibuya. Scheme 5-25 illustrates the use of TiCh to promote diastereoselective addition of diethyl phosphite to an a-amino aldehyde. [Pg.158]

Shibasaki showed that an aluminum-lithium-BINOL complex (ALB) also catalyzes the asymmetric addition of dialkyl phosphites to aldehydes, with ees ranging from 55 to 90% for aryl or unsaturated aldehydes (Scheme 5-37). [Pg.162]

Scheme 5-39 Asymmetric addition of methyl phosphinate to aldehydes using heterobimetallic BINOLcatalysts LLB = La/Li/BINOL, LPB = La/K/BINOL, ALB = AI/Li/BINOL... Scheme 5-39 Asymmetric addition of methyl phosphinate to aldehydes using heterobimetallic BINOLcatalysts LLB = La/Li/BINOL, LPB = La/K/BINOL, ALB = AI/Li/BINOL...
L-valine. The application of these ligands to the asymmetric addition of ZnEt2 to aldehydes provided the corresponding products with excellent enan-tioselectivities as high as 99% ee in almost all cases and with a catalytic loading as little as 0.02 mol% of the ligand depicted in Scheme 3.9. [Pg.111]

In 1999, Shi el al. showed that a diphenylthiophosphoramide derived from (li ,2i )-l,2-diaminocyclohexane could be used as a ligand in the catalytic asymmetric addition of ZnEt2 to aldehydes in the presence of Ti(Oi-Pr)4, providing the corresponding alcohols in enantioselectivities of 40-50% ee (Scheme 3.20). Another class of new ligands such as the phenylthio-phosphoramide of (7 )-1,1 -binaphthyl-2,2 -diamine was developed by the same group, and further tested as a ligand in the same conditions (Scheme 3.20). ... [Pg.118]

In 2001, Braga et al. reported the synthesis of new chiral C2-symmetric oxazolidine disulfide ligands from (R)-cysteine and successfully applied them as catalysts in the asymmetric addition of ZnEt2 to various aldehydes (Scheme 3.23). In the presence of 2mol% of ligand, excellent enantioselectivities of up to >99% ee were obtained even with aliphatic aldehydes such as n-decanal or n-hexanal. These authors proposed that the active catalyst did not maintain its C2-symmetry during the reaction. The disulfide bond was probably cleaved in situ by ZnEt2. [Pg.120]

Similar reactions were undertaken by Choi et al. in the presence of a new family of A -sulfonylated p-amino alcohols possessing two stereocentres as the chiral ligands. In using the chiral sulfonylated p-amino alcohol ligand depicted in Scheme 10.41, the asymmetric addition of McsSiCN to a wide range of aldehydes afforded the corresponding cyanohydrins in both excellent yields and enantioselectivities of up to 96% ee. [Pg.328]

Scheme 1.22 Kitamura and Noyori s mechanism of the asymmetric addition of dialkyl zinc to aryl aldehydes. Scheme 1.22 Kitamura and Noyori s mechanism of the asymmetric addition of dialkyl zinc to aryl aldehydes.
The chiral center would be installed from either Unear carbamate 15 or branched carbamate 16 via the asymmetric addition of malonate anion to the 7i-allyl Mo complex reported by Trost et al. [11] to afford the branched chiral malonate derivative 17. Decarboxylation of 17 should provide the mono-carboxylic acid 18. Masa-mune homologation with 18 affords our common precursor 14. Linear carbamate 15 was obtained from the corresponding cinnamic acid, and branched 16 was prepared in one pot from the corresponding aldehyde. [Pg.49]

The complex -Tol-BINAP-AgF (/>-Tol-BINAP - 2,2 -bis(di-/)-tolylphosphanyl)-l,l -binapthyl) catalyzes the asymmetric addition of allylic trimethoxysilanes to aldehydes (Equation (7)).7 3 The process can provide various optically active homoallylic alcohols with high enantioselectivity (up to 96% ee) and a remarkable 7 and anti- selectivities are observed for the reaction with crotylsilanes, irrespective of the configuration of the double bond ... [Pg.949]

Tanaka et al.28 have synthesised a series of (S)-chiral Schiff bases as the highly active (yield 69-99%) and enatioselective (ee 50-96%) catalysts in the reaction of addition of dialkylzinc to aldehydes. The stereochemistry of the asymmetric addition was suggested. In a transition state when S-chiral Schiff base was used as chiral source, the alkyl nucleophile attacked Re face of the activated aldehyde and formed the R-configuration alkylated product [13]. [Pg.138]

Pu and co-workers incorporated atropisomeric binaphthols in polymer matrixes constituted of binaphthyl units, the macromolecular chiral ligands obtained being successfully used in numerous enantioselective metal-catalyzed reactions,97-99 such as asymmetric addition of dialkylzinc reagents to aldehydes.99 Recently, they also synthesized a stereoregular polymeric BINAP ligand by a Suzuki coupling of the (R)-BINAP oxide, followed by a reduction with trichlorosilane (Figure 10).100... [Pg.453]

Vinylsilane to copper transmetallation has entered the literature,93 93a,93b and a system suitable for catalytic asymmetric addition of vinylsilanes to aldehydes was developed (Scheme 24).94 A copper(l) fluoride or alkoxide is necessary to initiate transmetallation, and the work employs a copper(ll) fluoride salt as a pre-catalyst, presumably reduced in situ by excess phosphine ligand. The use of a bis-phosphine was found crucial for reactivity of the vinylcopper species, which ordinarily would not be regarded as good nucleophiles for addition to aldehydes. The highly tailored 5,5 -bis(di(3,5-di-tert-butyl-4-methoxyphenyl)phosphino-4,4 -bis(benzodioxolyl) (DTBM-SEGPHOS) (see Scheme 24) was found to provide the best results, and the use of alkoxysilanes is required. Functional group tolerance has not been adequately addressed, but the method does appear encouraging as a way to activate vinylsilanes for use as nucleophiles. [Pg.809]

TADDOL 104 and 126 afford 95-99% ee in the asymmetric addition of organozinc reagents to a variety of aldehydes. The best enantioselectivities are observed when a mixture of the chiral titanium TADDOL compound 127 and excess [Ti(OPr1)4] are employed (Scheme 2-49). The mechanism of the alkylzinc addition involves acceleration of the asymmetric catalytic process by the... [Pg.113]

Hayashi et al.147 reported another highly enantioselective cyanohydrination catalyzed by compound 138. In this reaction, a Schilf base derived from fl-amino alcohol and a substituted salicylic aldehyde were used as the chiral ligand, and the asymmetric addition of trimethylsilylcyanide to aldehyde gave the corresponding cyanohydrin with up to 91% ee (Scheme 2-56). [Pg.121]

For more information about the asymmetric addition of trimethylsilyl cyanide to aldehydes, see Belokon et al.151... [Pg.123]

Scheme 6.21. Representative non-Zr-catalyzed asymmetric additions of cyanide to aldehydes. Scheme 6.21. Representative non-Zr-catalyzed asymmetric additions of cyanide to aldehydes.
In the asymmetric total synthesis of the marine natural product, methyl sarcoate, the key step for the introduction of the chirality, was achieved by using an asymmetric Michael addition. Asymmetric addition of /-PrMgCl to aminal ester 93 in the presence of a catalytic amount of Cul, followed by acidic hydrolysis of the aminal function, afforded the chiral aldehyde 94 in 60% yield (Equation 10) <2005TL1263>. [Pg.56]

Among chiral auxiliaries, l,3-oxazolidine-2-thiones (OZTs) have attracted much interest for their various applications in different synthetic transformations.2 Such simple structures, directly related to far better known chiral oxazolidinones,11,12,57 have been explored in asymmetric Diels-Alder reactions and asymmetric alkylations, but mainly in condensation of their /V-acyl derivatives with aldehydes. Chiral OZTs have shown interesting characteristics in anti-selective aldol reactions58 or combined asymmetric addition. [Pg.146]

Biphasic conditions can also be used to suppress background reaction. HnL-catalysed asymmetric addition of cyanide to aldehydes and ketones provides an important example,... [Pg.59]

Belokon, Y. N. Chusov, D. Borkin, D. A. Yashkina, L. V. Dmitriev, A. V. Katayeva, D. North, M. (2006) Chiral Ti(lV) complexes of hexadentate Schiff bases as precatalysts for the asymmetric addition of TMSCN to aldehydes and the ring opening of cyclohexane oxide.. Tetrahedron Asymmetry, 17, 2328-2333. [Pg.339]

ASYMMETRIC ADDITION OF CYANIDE AND ISOCYANIDE TO ALDEHYDES OR IMINES... [Pg.120]

Activation of sp C—H Bonds The activation of sp C—H bonds has been extensively studied for many years. However, asymmetric additions of sp C—H bonds to unsaturated bonds have been studied only since 2003 or so. Since the work of Yamaguchf and later Carreira, the use of stoichiometric (and more recently catalytic) Lewis acids in the presence of an excess amount of base for alkyne-aldehyde additions has also been investigated extensively these studies... [Pg.130]

CuOTf/PyBox System The first direct asymmetric addition of alkynes to imines, generated from aldehydes and amines in situ, was reported by using copper salts in the presence of chiral PyBox ligand (Scheme 5.2). The products were obtained in good yields and excellent enantioselectivities in most cases. When toluene was used as solvent, up to 93% yield and 99% ee were obtained. Up to 99.5% ee was obtained when the reaction was carried out in 1,2-dichloroethane. The reaction can also be performed in water smoothly, and good enantioselectivities (78-91% ee) were obtained. [Pg.131]

Scheme 5.2. Asymmetric addition of alkynes to imines generated from aldehydes and amines. Scheme 5.2. Asymmetric addition of alkynes to imines generated from aldehydes and amines.
Reactions where NLE have been discovered include Sharpless asymmetric epoxi-dation of allylic alcohols, enantioselective oxidation of sulfides to sulfoxides, Diels-Alder and hetero-Diels-Alder reactions, carbonyl-ene reactions, addition of MesSiCN or organometallics on aldehydes, conjugated additions of organometal-lics on enones, enantioselective hydrogenations, copolymerization, and the Henry reaction. Because of the diversity of the reactions, it is more convenient to classify the examples according to the types of catalyst involved. [Pg.213]

In 2008, the same group employed chiral dicarboxylic acid (R)-5 (5 mol%, R = 4- Bu-2,6-Me2-CgHj) as the catalyst in the asymmetric addition of aldehyde N,N-dialkylhydrazones 81 to aromatic iV-Boc-imines 11 in the presence of 4 A molecular sieves to provide a-amino hydrazones 176, valuable precursors of a-amino ketones, in good yields with excellent enantioselectivities (35-89%, 84-99% ee) (Scheme 74) [93], Aldehyde hydrazones are known as a class of acyl anion equivalents due to their aza-enamine structure. Their application in the field of asymmetric catalysis has been limited to the use of formaldehyde hydrazones (Scheme 30). Remarkably, the dicarboxylic acid-catalyzed method applied not only to formaldehyde hydrazone 81a (R = H) but also allowed for the use of various aryl-aldehyde hydrazones 81b (R = Ar) under shghtly modified conditions. Prior to this... [Pg.451]

Since the pioneering studies of asymmetric catalysis with core-functionalized dendrimers reported by Brunner (88) and Bolm (89), several noteworthy investigations have been described in this field. Some examples of the dendritic effects observed in enantioselective catalysis with dendrimers having active sites in the core were discussed in Section II, such as the catalytic experiments with TADDOL-cored dendrimers described by Seebach et al. (59) the asymmetric addition of Et2Zn to aldehydes catalyzed by core-functionalized phenylacetylene-containing dendrimers reported by Hu et al (42)-, the asymmetric hydrogenation investigations with (R)-BINAP core-functionalized dendrimers synthesized by Fan et al. (36) or the results... [Pg.142]

In earher work, the Hall group found that catalytic amounts of triflic acid promoted the addition of aUylboronates to aldehydes [132], While aUylboration reactions catalyzed by chiral Lewis acids in general led to only low levels of enan-tioselection [133], Hall found that chiral LBA 1 catalyzes the asymmetric addition of allyl- and crotylboronates to various aldehydes to provide products in excellent yields and moderate to high ee s (Scheme 5.71) [134]. Further, double diastereose-lective crotylboration could also be achieved with high selectivities using the... [Pg.124]

Asymmetric addition of a dialkylzinc reagent to an aldehyde, catalyzed by a Lewis base or a Lewis acid, is a viable alternative to enantioselective reduction of ketones as means to prepare enantiomerically enriched alcohols like 605 and... [Pg.501]


See other pages where Aldehydes asymmetric addition is mentioned: [Pg.52]    [Pg.52]    [Pg.141]    [Pg.142]    [Pg.148]    [Pg.157]    [Pg.327]    [Pg.471]    [Pg.121]    [Pg.156]    [Pg.146]    [Pg.101]    [Pg.108]    [Pg.501]   


SEARCH



Addition aldehydes

Aldehydes asymmetric

Asymmetric addition

© 2024 chempedia.info