Alcohols permanganate

Nitrosyl perchlorate Organic materials Perchloric acid Alcohols Permanganic acid Organic materials Peroxodisulfuric acid Organic liquids Potassium dioxide Ethanol Potassium perchlorate Ethanol Potassium permanganate Ethanol, etc. Ruthenium(VIII) oxide Organic materials Silver perchlorate Aromatic compounds Sodium peroxide Hydroxy compounds Uranium hexafluoride Aromatic hydrocarbons, etc. Uranyl perchlorate Ethanol See v-halomides Alcohols... 

Aldehydes are oxidized not only by the same reagents that oxidize primary and secondary alcohols—permanganate and dichromate—but also by the very mild oxidizing agent silver ion. Oxidation by silver ion requires an alkaline medium to prevent precipitation of the insoluble silver oxide, a complexing agent is added ammonia... 

Isobutyl alcohol, isobutanol, 2-methyl-propanol, isopropyl carbinol, Me2CHCH20H. B.p. 108°C. Occurs in fusel-oil. Oxidized by potassium permanganate to 2-methyl-propanoic acid dehydrated by strong sulphuric acid to 2-methylpropene. 

By oxidation of primary alcohols with alkaline potassium permanganate solution or with a dichromate and dilute sulphuric add, for example ... 

Preparation of the sulphones. Dissolve the 2 4-dinitrophenyl-sulphide in the minimum volume of warm glacial acetic acid and add 3 per cent, potassium permanganate solution with shaking as fast as decolourisation occurs. Use a 50 per cent, excess of potassium permanganate if the sulphide tends to precipitate, add more acetic acid. Just decolourise the solution with sulphur dioxide (or with sodium bisulphite or alcohol) and add 2-3 volumes of crushed ice. Filter off the sulphone, dry, and recrystaUise from alcohol. 

Suspend in a round-bottomed flask 1 g. of the substance in 75-80 ml. of boihng water to which about 0 -5 g. of sodium carbonate crystals have been added, and introduce slowly 4 g. of finely-powdered potassium permanganate. Heat under reflux until the purple colour of the permanganate has disappeared (1-4 hours). Allow the mixture to cool and carefully acidify with dilute sulphuric acid. Heat the mixture under reflux for a further 30 minutes and then cool. Remove any excess of manganese dioxide by the addition of a little sodium bisulphite. Filter the precipitated acid and recrystallise it from a suitable solvent (e.g., benzene, alcohol, dilute alcohol or water). If the acid does not separate from the solution, extract it with ether, benzene or carbon tetrachloride. 

Potassium permanganate (KMn04) will also oxidize pri mary alcohols to carboxylic acids What is the oxidation state of manganese in KMn04 ... 

Oxidation of primary alcohols (Section 15 10) Potassi um permanganate and chromic acid convert primary al cohols to carboxylic acids by way of the corresponding aldehyde... 

Secondary alcohols (C q—for surfactant iatermediates are produced by hydrolysis of secondary alkyl borate or boroxiae esters formed when paraffin hydrocarbons are air-oxidized ia the presence of boric acid [10043-35-3] (19,20). Union Carbide Corporation operated a plant ia the United States from 1964 until 1977. A plant built by Nippon Shokubai (Japan Catalytic Chemical) ia 1972 ia Kawasaki, Japan was expanded to 30,000 t/yr capacity ia 1980 (20). The process has been operated iadustriaHy ia the USSR siace 1959 (21). Also, predominantiy primary alcohols are produced ia large volumes ia the USSR by reduction of fatty acids, or their methyl esters, from permanganate-catalyzed air oxidation of paraffin hydrocarbons (22). The paraffin oxidation is carried out ia the temperature range 150—180°C at a paraffin conversion generally below 20% to a mixture of trialkyl borate, (RO)2B, and trialkyl boroxiae, (ROBO). Unconverted paraffin is separated from the product mixture by flash distillation. After hydrolysis of residual borate esters, the boric acid is recovered for recycle and the alcohols are purified by washing and distillation (19,20). 

The solubihty of potassium permanganate in aqueous potassium hydroxide (108) is shown in Figure 7. Permanganates are soluble in certain nonaqueous solvents such as hquid NH, but not in hquid SO2. Organic solvents such as glacial acetic acid, acetone, acetonitrile, tert-huty alcohol. 

The use of sofid supports in conjunction with permanganate reactions leads to modification of the reactivity and selectivity of the oxidant. The use of an inert support, such as bentonite (see Clays), copper sulfate pentahydrate, molecular sieves (qv) (151), or sifica, results in an oxidant that does not react with alkenes, but can be used, for example, to convert alcohols to ketones (152). A sofid supported permanganate reagent, composed of copper sulfate pentahydrate and potassium permanganate (153), has been shown to readily convert secondary alcohols into ketones under mild conditions, and in contrast to traditional permanganate reactivity, the reagent does not react with double bonds (154). 

Sofid sodium permanganate monohydrate has been shown to be a selective synthetic reagent (156). It is typically used in hexane for the heterogeneous oxidation of aldehydes, alcohols, and sulfides. Synthetic methodology based on crystal surfaces exhibited greater selectivity, higher yield, and easier work-up as compared to aqueous permanganate reactions. 

Silver Permanganate. Silver permanganate [7783-98-4] AgMnO, is a violet soHd formed when a potassium permanganate solution is added to a silver nitrate solution. It decomposes upon heating, exposure to light, or by reaction with alcohol. 

We have already noted (Section 4.04.2.1.4(xi)) that alkyl groups on pyrazoles are oxidized with permanganate to carboxylic acids. Silver nitrate and ammonium persulfate transform 4-ethyl-1-methylpyrazole (436) into the ketone (437) (72JHC1373). The best yield was obtained starting with the alcohol (438) and using an acid dichromate solution as oxidizing agent. 

The purification of diethyl ether (see Chapter 4) is typical of liquid ethers. The most common contaminants are the alcohols or hydroxy compounds from which the ethers are prepared, their oxidation products (e.g. aldehydes), peroxides and water. Peroxides, aldehydes and alcohols can be removed by shaking with alkaline potassium permanganate solution for several hours, followed by washing with water, concentrated sulfuric acid [CARE], then water. After drying with calcium chloride, the ether is distilled. It is then dried with sodium or with lithium aluminium hydride, redistilled and given a final fractional distillation. The drying process should be repeated if necessary. 

Ketones are more stable to oxidation than aldehydes and can be purified from oxidisable impurities by refluxing with potassium permanganate until the colour persists, followed by shaking with sodium carbonate (to remove acidic impurities) and distilling. Traces of water can be removed with type 4A Linde molecular sieves. Ketones which are solids can be purified by crystallisation from alcohol, toluene, or petroleum ether, and are usually sufficiently volatile for sublimation in vacuum. Ketones can be further purified via their bisulfite, semicarbazone or oxime derivatives (vide supra). The bisulfite addition compounds are formed only by aldehydes and methyl ketones but they are readily hydrolysed in dilute acid or alkali. 

---