Additives reaction conditions

Table 11.8. Additional reaction conditions collected for validation of the model performance...

The last reaction step was the acylation of the 4-quinazalone nitrogen. There was little literature precedent for this reaction step however, our group was very experienced in the field since we had performed many acylation reactions over the years. Initial efforts using triethylamine and THF/DMF had afforded poor yields of the desired products (see Table 8.6). Performing the reactions in neat pyridine slightly increased the yields, and the use of DMAP at 80°C in DMF produced the best yields obtained to date (a mere 14%). Additional reaction conditions were attempted with no increase in reaction yields. Total time for optimization of this reaction step was 12 days with only a 14% optimized yield. 

The sensitivity of 46 to conjugate addition reaction conditions indicated to us the need for a mechanistically distinct approach to formation of the penultimate ring of strychnine. The fact that the weak carbon-iodide bond ( 57 kcal/mol) is readily cleaved heterolytically suggested the potential for a radical-mediated ring piperidine closure.52... 

To gain further insight into the mechanism whether the 2,3-trans-2,6-trans-tetrahydropyran 2.41a undergoes equilibrium in the oxa-conjugate addition reaction, 2.41a was resubjected to the oxa-conjugate addition reaction conditions (Scheme 2.4). The reaction of 2.41a with treatment of pyrrolidine and BzOH resulted in the exclusive formation of 2.42a (96 %, dr >20 1), revealing that the latter explanation is the more likely one. In the preliminary studies, it was... 

Benzene can undergo addition reactions which successively saturate the three formal double bonds, e.g. up to 6 chlorine atoms can be added under radical reaction conditions whilst catalytic hydrogenation gives cyclohexane. 

Reaction databases additionally contain information on chemical reactions, giving the reaction participants and reaction conditions of both single- and multi-step reactions. 

Torgov introduced an important variation of the Michael addition allylic alcohols are used as vinylogous a -synthons and 1,3-dioxo compounds as d -reagents (S.N. Ananchenko, 1962, 1963 H. Smith, 1964 C. Rufer) 1967). Mild reaction conditions have been successful in the addition of ],3-dioxo compounds to vinyl ketones. Potassium fluoride can act as weakly basic, non-nudeophilic catalyst in such Michael additions under essentially non-acidic and non-basic conditions (Y. Kitabara, 1964). 

Since (A) does not contain any other functional group in addition to the formyl group, one may predict that suitable reaction conditions could be found for all conversions into (A). Many other alternative target molecules can, of course, be formulated. The reduction of (H), for example, may require introduction of a protecting group, e.g. acetal formation. The industrial synthesis of (A) is based upon the oxidation of (E) since 3-methylbutanol (isoamyl alcohol) is a cheap distillation product from alcoholic fermentation ( fusel oils ). The second step of our simple antithetic analysis — systematic disconnection — will now be exemplified with all target molecules of the scheme above. For the sake of brevity we shall omit the syn-thons and indicate only the reagents and reaction conditions. 

Success of the reactions depends considerably on the substrates and reaction Conditions. Rate enhancement in the coupling reaction was observed under high pressure (10 kbar)[l 1[. The oxidative addition of aryl halides to Pd(0) is a highly disfavored step when powerful electron donors such as OH and NHt reside on aromatic rings. Iodides react smoothly even in the absence of a... 

The phenylacetic acid derivative 469 is produced by the carbonylation of the aromatic aldehyde 468 having electron-donating groups[jl26]. The reaction proceeds at 110 C under 50-100 atm of CO with the catalytic system Pd-Ph3P-HCl. The reaction is explained by the successive dicarbonylation of the benzylic chlorides 470 and 471 formed in situ by the addition of HCl to aldehyde to form the malonate 472, followed by decarboxylation. As supporting evidence, mandelic acid is converted into phenylacetic acid under the same reaction conditions[327]. 

In addition to the catalytic allylation of carbon nucleophiles, several other catalytic transformations of allylic compounds are known as illustrated. Sometimes these reactions are competitive with each other, and the chemo-selectivity depends on reactants and reaction conditions. 

Direct addition of ammonia to olefmic bonds would be an attractive method for amine synthesis, if it could be carried out smoothly. Like water, ammonia reacts with butadiene only under particular reaction conditions. Almost no reaction takes place with pure ammonia in organic solvents. The presence of water accelerates the reaction considerably. The reaction of aqueous ammonia (28%) with butadiene in MeCN in the presence orPd(OAc)i and PhjP at 80 C for 10 h gives tri-2,7-octadienylamine (47) as the main product, accompanied by a small amount of di-2,7-octadienylamine (46)[46,47], Isomeric branched... 

Tandem cyclization/3-substitution can be achieved starting with o-(trifluoro-acetamido)phenylacetylenes. Cyclization and coupling with cycloalkenyl trif-lates can be done with Pd(PPh3)4 as the catalyst[9]. The Pd presumably cycles between the (0) and (II) oxidation levels by oxidative addition with the triflate and the reductive elimination which completes the 3-alkenylation. The N-protecting group is removed by solvolysis under the reaction conditions, 3-Aryl groups can also be introduced using aryl iodides[9]. 

Hydroxy-THISs react with electron-deficient alkynes to give nonisol-able adducts that extrude carbonyl sulfide, affording pyrroles (23). Compound 16 (X = 0) seems particularly reactive (Scheme 16) (25). The cycloaddition to benzyne yields isoindoles in low- yield. Further cyclo-addition between isoindole and benzyne leads to an iminoanthracene as the main product (Scheme 17). The cycloadducts derived from electron-deficient alkenes are stable (23, 25) unless highly strained. Thus the two adducts, 18a (R = H, R = COOMe) and 18b (R = COOMe, R = H), formed from 7, both extrude furan and COS under the reaction conditions producing the pyrroles (19. R = H or COOMe) (Scheme 18). Similarly, the cycloadduct formed between 16 (X = 0) and dimethylfumarate... 

Many of the most interesting and useful reactions of aldehydes and ketones involve trans formation of the initial product of nucleophilic addition to some other substance under the reaction conditions An example is the reaction of aldehydes with alcohols under con ditions of acid catalysis The expected product of nucleophilic addition of the alcohol to the carbonyl group is called a hemiacetal The product actually isolated however cor responds to reaction of one mole of the aldehyde with two moles of alcohol to give gem mal diethers known as acetals... 

Conjugation of the newly formed double bond with the carbonyl group stabilizes the a p unsaturated aldehyde provides the driving force for the dehydration and controls Its regioselectivity Dehydration can be effected by heating the aldol with acid or base Normally if the a p unsaturated aldehyde is the desired product all that is done is to carry out the base catalyzed aldol addition reaction at elevated temperature Under these conditions once the aldol addition product is formed it rapidly loses water to form the a p unsaturated aldehyde... 

Even though ketones have the potential to react with themselves by aldol addition recall that the position of equilibrium for such reactions lies to the side of the starting materials (Section 18 9) On the other hand acylation of ketone enolates gives products (p keto esters or p diketones) that are converted to stabilized anions under the reaction conditions Consequently ketone acylation is observed to the exclusion of aldol addition when ketones are treated with base m the presence of esters... 

At first glance it appears that these systems do conform fully to the discussion above this is an oversimplification, however. The ortho and para hydrogens in phenol are not equal in reactivity, for example. In addition, the technology associated with these polymers involves changing the reaction conditions as the polymerization progresses to shift the proportions of several possible reactions. Accordingly, the product formed depends on the nature of the catalyst used, the proportions of the monomers, and the temperature. Sometimes other additives or fillers are added as well. 

Reactions with Alcohols. The addition of alcohols to acrolein may be catalyzed by acids or bases. By the judicious choice of reaction conditions the regioselectivity of the addition maybe controlled and alkoxy propionaldehydes, acrolein acetals, or alkoxypropionaldehyde acetals produced in high yields (66). 

Acroleki acetals have also been prepared ki high yields (66). The formation of the acetal requkes the careful control of reaction conditions to avoid additions to the double bond. Table 5 Hsts a variety of acroleki acetals that have been prepared and thek boiling points (68). 

The addition of alcohols to form the 3-alkoxypropionates is readily carried out with strongly basic catalyst (25). If the alcohol groups are different, ester interchange gives a mixture of products. Anionic polymerization to oligomeric acrylate esters can be obtained with appropriate control of reaction conditions. The 3-aIkoxypropionates can be cleaved in the presence of acid catalysts to generate acrylates (26). Development of transition-metal catalysts for carbonylation of olefins provides routes to both 3-aIkoxypropionates and 3-acryl-oxypropionates (27,28). Hence these are potential intermediates to acrylates from ethylene and carbon monoxide. 

Tetrafluoroethylene undergoes addition reactions typical of an olefin. It bums in air to form carbon tetrafluoride, carbonyl fluoride, and carbon dioxide (24). Under controlled conditions, oxygenation produces an epoxide (25) or an explosive polymeric peroxide (24). Trifluorovinyl ethers,... 

Gels. Fluorosihcone fluids with vinyl functionahty can be cured using the platinum catalyst addition reactions. The cure can be controlled such that a gel or a soft, clear, jelly-like form is achieved. Gels with low (12% after 7 d) swell in gasoline fuel are useflil (9) to protect electronics or circuitry from dust, dirt, fuels, and solvents in both hot (up to 150°C) and cold (down to —65° C) environments. Apphcations include automotive, aerospace, and electronic industries, where harsh fuel—solvent conditions exist while performance requirements remain high. 

In addition to the processes mentioned above, there are also ongoing efforts to synthesize formamide direcdy from carbon dioxide [124-38-9J, hydrogen [1333-74-0] and ammonia [7664-41-7] (29—32). Catalysts that have been proposed are Group VIII transition-metal coordination compounds. Under moderate reaction conditions, ie, 100—180°C, 1—10 MPa (10—100 bar), turnovers of up to 1000 mole formamide per mole catalyst have been achieved. However, since expensive noble metal catalysts are needed, further work is required prior to the technical realization of an industrial process for formamide synthesis based on carbon dioxide. 

Acyl isocyanates (13,X = O, S) have been shown to react as heterodienes ia most cycloadduct formations. Notable examples iaclude autodimerization and the addition to imines (46,47). Unlike aromatic isocyanates, it is not possible to predict the reaction pathway nor the stmcture of the products which may arise from a given approach or set of reaction conditions. 

---