Addition polycondensation

Since such a polyaddition proceeds mechanistically like a condensation polymerization, many authors refer to it as an addition polycondensation, in contrast to the substitution polycondensation of Equation (lS-2). 

Addition polycondensations may occur through addition of functional groups onto a double bond or by addition onto heterocyclic rings with simultaneous ring opening. Polyurethane formation from diols and... 

Addition polycondensations possible across a carbon-carbon double bond include formation of imines (with diamines, XH = NH2), thioethers (with dithiols, XH = SH), polyamides (withaldoximes, XH = HON=CH), and polyethers (with diphenols, XH = OH), as shown in Equation (17-7) for addition to bis-maleimide ... 

Finally, addition polycondensations can also occur with simultaneous ring opening, as, for example, in the hardening of diepoxides with diamines ... 

Poly(ether ketones) may be prepared by three additional polycondensation methods. The first and oldest is a Friedel-Crafts polycondensation in which monomers such as diphenyl ether and 1, 3, 5-benzenetricarboxylic acid chloride are reacted together to form an aromatic poly(ether ketone) network ... 

Condensation polymerization differs from addition polymerization in that the polymer is formed by reaction of monomers, each step in the process resulting in the elimination of some easily removed molecule (often water). E.g. the polyester polyethylene terephthalate (Terylene) is formed by the condensation polymerization (polycondensation) of ethylene glycol with terephthalic acid ... 

The second category of polymerization reactions does not involve a chain reaction and is divided into two groups poly addition and poly condensation [4]. In botli reactions, tire growth of a polymer chains proceeds by reactions between molecules of all degrees of polymerization. In polycondensations a low-molecular-weight product L is eliminated, while polyadditions occur witliout elimination ... 

Phosgene addition is continued until all the phenoHc groups are converted to carbonate functionahties. Some hydrolysis of phosgene to sodium carbonate occurs incidentally. When the reaction is complete, the methylene chloride solution of polymer is washed first with acid to remove residual base and amine, then with water. To complete the process, the aqueous sodium chloride stream can be reclaimed in a chlor-alkah plant, ultimately regenerating phosgene. Many variations of this polycarbonate process have been patented, including use of many different types of catalysts, continuous or semicontinuous processes, methods which rely on formation of bischloroformate oligomers followed by polycondensation, etc. 

In general, polymers are formed by two types of reactions condensation and addition. The formation of a polyester by polycondensation may be illustrated as follows. 

Tankage of additional =Si — OH tetrahedra occurs as a polycondensation reaction (eq. 4) and eventually results in a Si02 network. The H2O and alcohol expelled from the reaction remain in the pores of the network. 

The addition of an alkanolamine, such as diethanolamine, to TYZOR TBT, as well as the use of a less moisture-sensitive alkanolamine titanate complex such as TYZOR TE, has been reported to prolong catalyst life and minimi2e ha2e formation in the polymer (475—476). Several excellent papers are available that discuss the kinetics and mechanism of titanate-cataly2ed esterification and polycondensation reactions (477—484). 

A factor in addition to the RTD and temperature distribution that affects the molecular weight distribution (MWD) is the nature of the chemical reaciion. If the period during which the molecule is growing is short compared with the residence time in the reactor, the MWD in a batch reactor is broader than in a CSTR. This situation holds for many free radical and ionic polymerization processes where the reaction intermediates are very short hved. In cases where the growth period is the same as the residence time in the reactor, the MWD is narrower in batch than in CSTR. Polymerizations that have no termination step—for instance, polycondensations—are of this type. This topic is treated by Denbigh (J. Applied Chem., 1, 227 [1951]). 

Polyphosphates are also an important class of organophosphorus polymers. In addition to their flame-retardant characteristics, they possess attractive plasticizing properties and can be used as polymeric additives to other polymers [123-128]. In general, polyphosphates can be prepared by interfacial [119,129], melt [130], or solution polycondensation [131,132a,b]. Kricheldorf and Koziel [133] prepared polyphosphates from silylated bisphenols. 

Table 2 Bifunctional Azo Compounds Used Frequently in Polycondensation and Addition Reactions...

The reaction of ACPC with linear aliphatic amines has been investigated in a number of Ueda s papers [17,35,36]. Thus, ACPC was used for a interfacia] polycondensation with hexamethylene diamine at room temperature [17] yielding poly(amide)s. The polymeric material formed carried one azo group per repeating unit and exhibited a high thermal reactivity. By addition of styrene and methyl methacrylate to the MAI and heating, the respective block copolymers were formed. 

Recently, various polyesters such as poly(ethylene adipate), poly(tetramethylene adipate), poly(caprolac-tone), and poly(aliphatic carbonate), having terminal hydroxyl groups, were reacted with ACPC to give corresponding macroazoesters and their thermal behaviors were observed by DSC [14]. The block copolymers of these polycondensation polymers with addition polymers such as PSt and PMMA were synthesized [14]. 

In addition to a block copolymer, a microcapsule was made from suspension interfacial polycondensation between diacid chloride having aromatic-aliphatic azo group and aliphatic triamine [70,71]. The capsule was covered with a crosslinked structure having an azo group that was thermally stable but sensitive to light so as to be applicable to color photoprinting materials. 

A general step ahead in polycondensation was achieved by the application of the active ester method by DeTar et al.19) and Kovacs et al.291 Very soon, the nitrophenyl ester, the pentachlorophenyl ester, or the hydroxysucdnimido ester were used exclusively. The esters of the protected tripeptides could be purified by crystallization, then the N-protecting group was split off and the free peptide esters were purified again. Addition of base starts the polycondensation, resulting quickly in the formation of a viscous solution at low temperature. 

Difficulties due to side reactions (cyclization) and a broad molecular weight distribution accompanying the polycondensation of active esters led to the application of methods wherein the polymers are built up stepwise. In 1968, Sakakibara et al.31) introduced the solid-phase technique using Merrifield s resin. By stepwise addition of tert-pentyloxycar-bonyl tripeptides, they have synthesized (Pro-Pro-Gly)n with n = 5, 10, 15 and 20. 

Experiment with addition of diphenyl carbonate Diphenyl terephthalate, 31.8 g (0.1 mol), 28.62 g (0.09 mol) of diphenyl isophthalate, and 2.37 g (0.011 mol) of diphenyl carbonate are polycondensed with 45.6 g (0.2 mol) of 2,2-bis(4-hydroxyphenyl)propane (bisphenol-A) under the preceding conditions. A slighdy brownish, extremely tough, noncrystalline polyester is obtained with an inherent viscosity equal to 0.56 dL/g. The softening point of the polyester is equal to 200°C and the melting range is 215-285°C. 

This method involves the direct polycondensation of aromatic diamines with aromatic diacids in the presence of an aryl phosphite (triphenyl phosphite) and an organic base like pyridine.7,9 70 71 The addition of salts improves die solubility of the polymer and, with this, the maximum attainable molecular weight.71 The concentrations are, however, lower than by the dichloride method. 

An unusual method has been used to prepare a hyperbranched polyimide starting from two monomers a difunctional A2 and a trifunctional B3. The gel formation can be avoided with careful control of the polycondensation conditions (molar ratio, order of the monomer addition, and low concentration). The A2 and B3 monomers were respectively 6FDA and tris(4-aminophenyl)... 

Example 2.9 Repeat Example 2.8 assuming that the polymerization is second order in monomer concentration. This assumption is appropriate for a binary polycondensation with good initial stoichiometry, while the pseudo-first-order assumption of Example 2.8 is typical of an addition polymerization. 

Horhold et al. and Lenz et al. [94,95]. The polycondensation provides the cyano-PPVs as insoluble, intractable powders. Holmes et al. [96], and later on Rikken et al. [97], described a new family of soluble, well-characterized 2,5-dialkyl- and 2,5-dialkoxy-substituted poly(pflrfl-phenylene-cyanovinylene)s (74b) synthesized by Knoevenagel condensation-polymerization of the corresponding alkyl-or alkoxy-substituted aromatic monomers. Careful control of the reaction conditions (tetra-n-butyl ammonium hydroxide as base) is required to avoid Michael-type addition. 

---