Acrylic copolymers of 2- 2-hydroxy

Photochemical Stability of UV-Screening Transparent Acrylic Copolymers of 2-(2-Hydroxy-5-vinylphenyl)-2 -benzotriazole... 

For well-controlled arm number of the star polymers, an efficient approach is the use of multifunctional initiators [157,158]. For instance, the four-armed initiator, NLI-1, which was prepared by the condensation reaction of the hydroxy groups in C(CH20CH2CH2CH20H)4 with a-bromoisobutyric acid, was used in the ATRP of (2,2-dimethyl-l,3-dioxoIane-4-yl)methyl acrylate (DMDMA) with CuBr/bpy as catalyst. After isolation from the polymerization system, four-armed poly(DMDMA)s, such as NLI-2 with Mw/Mn = 1.28—1.41 were obtained, and used in the successive ATRP of MMA, giving star-block copolymers NLB-3. It is known that the cycloacetal ring is unstable in acidic conditions, so the hydrolysis of the block copolymer NLB-3 was accomplished in a 1N HCl aqueous solution to give the amphiphilic star-block copolymer structure NLB-4 as shown in Scheme 3.37 [159]. 

Such copolymers of oxygen have been prepared from styrene, a-methylstyrene, indene, ketenes, butadiene, isoprene, l,l-diphen5iethylene, methyl methacrjiate, methyl acrylate, acrylonitrile, and vinyl chloride (44,66,109). 1,3-Dienes, such as butadiene, yield randomly distributed 1,2- and 1,4-copolymers. Oxygen pressure and olefin stmcture are important factors in these reactions for example, other products, eg, carbonyl compounds, epoxides, etc, can form at low oxygen pressures. Polymers possessing dialkyl peroxide moieties in the polymer backbone have also been prepared by base-catalyzed condensations of di(hydroxy-/ f2 -alkyl) peroxides with dibasic acid chlorides or bis(chloroformates) (110). 

Specialty waxes include polar waxes for more polar adhesive systems. Examples would be castor wax (triglyceride of 12-hydroxy stearic acid) or Paracin wax N- 2 hydroxy ethyl)-12-hydroxy stearamide) which are used in polyester, polyamide, or with high VA EVA copolymer-based systems. Other common polar waxes are maleated polyethylenes, which are used to improve the specific adhesion of polyethylene-based adhesives, and low molecular weight ethylene copolymers with vinyl acetate or acrylic acid, which are used to improve low temperature adhesion. High melting point isotactic polypropylene wax (7 155°C) and highly refined paraffin wax (7,n 83°C) are used where maximum heat resistance is critical. Needless to say, these specialty waxes also command a premium price, ranging from 2 to 5 times that of conventional paraffin wax. 

Quantum yields and lifetimes of emission (fluorescence) as well as other principal rates of deactivation have been measured on 2-hydroxy benzophenone and 2-hydroxyphenyl benzotriazole derivatives. Polymerizable UV screening agents have been prepared and copolymerized with acrylics in order to obtain transparent films containing nonfugitive UV screening agents. Preliminary results of studies of photodegradation on these copolymers are also reported here. 

Herein we present the synthesis of two series of fluorinated acrylate polymers and copolymers derived from commercially available hexafluoro-2-hydroxy-2(4-fluorophenyl)propane. The solubility, film-forming ability, thermal stability, and water absorption in these polymers have been studied. 

HMX HMX HMX HMX HMX HMX HMX HMX HMX HMX HMX HMX HNS NTO NTO/HMX NTO/HMX NTO/HMX PETN PETN PETN PETN PETN PETN PETN PETN PETN PETN RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX TATB/HMX Cariflex (thermoplastic elastomer) Hydroxy-terminated polybutadiene (polyurethane) Hydroxy-terminated polyester Kraton (block copolymer of styrene and ethylene-butylene) Nylon (polyamide) Polyester resin-styrene Polyethylene Polyurethane Poly(vinyl) alcohol Poly(vinyl) butyral resin Teflon (polytetrafluoroethylene) Viton (fluoroelastomer) Teflon (polytetrafluoroethylene) Cariflex (block copolymer of butadiene-styrene) Cariflex (block copolymer of butadiene-styrene) Estane (polyester polyurethane copolymer) Hytemp (thermoplastic elastomer) Butyl rubber with acetyl tributylcitrate Epoxy resin-diethylenetriamine Kraton (block copolymer of styrene and ethylene-butylene) Latex with bis-(2-ethylhexyl adipate) Nylon (polyamide) Polyester and styrene copolymer Poly(ethyl acrylate) with dibutyl phthalate Silicone rubber Viton (fluoroelastomer) Teflon (polytetrafluoroethylene) Epoxy ether Exon (polychlorotrifluoroethylene/vinylidine chloride) Hydroxy-terminated polybutadiene (polyurethane) Kel-F (polychlorotrifluoroethylene) Nylon (polyamide) Nylon and aluminium Nitro-fluoroalkyl epoxides Polyacrylate and paraffin Polyamide resin Polyisobutylene/Teflon (polytetrafluoroethylene) Polyester Polystyrene Teflon (polytetrafluoroethylene) Kraton (block copolymer of styrene and ethylene-butylene)... 

In addition, Kennedy and Hongu [129] have prepared amphiphilic diblock cooligomers from the condensation of a-methoxy-co-hydroxy polyoxyethylene with isocyanato-terminated polyisobutylene. In the same way, from a,codiisocyanate styrenic telomer 29, a Japanese team [130] has prepared PFA-h-PS-h-PFA and PHEA-h-PS-h-PHEA triblock copolymers (where FA and HEA represents fluoro acrylate and 2-hydroxy ethyl acrylate, respectively), as follows ... 

A significant number of works are concerned with the development of new membranes for the separation of mixtures of aromatic/alicyclic hydrocarbons [10,11,77-109]. For example, the following works can be mentioned. A mixture of cellulose ester and polyphosphonate ester (50 wt%) was used for benzene/cyclohexane separation [113]. High values of the separation factor and flux were achieved (up to 2 kg/m h). In order to achieve better fluxes and separation factors the attention was shifted to the modification of polymers by grafting technique. Grafted membranes were made of polyvinylidene fluoride with 4-vinyl pyridine or acrylic acid by irradiation [83]. 2-Hydroxy-3-(diethyl-amino) propyl methacrylate-styrene copolymer membranes with cyanuric chloride were prepared, which exhibited a superior separation factor /3p= 190 for a feed aromatic component concentration of 20 wt%. Graft copolymer membranes based on 2-hydroxyethyl methylacrylate-methylacrylate with thickness 10 pm were prepared [85]. The membranes yielded a flux of 0.7 kg/m h (for feed with 50 wt% of benzene) and excellent selectivity. Benzene concentration in permeate was about 100 wt%. A membrane based on polyvinyl alcohol and polyallyl amine was prepared [87]. For a feed containing 10 wt% of benzene the blend membrane yielded a flux of 1-3 kg/m h and a separation factor of 62. 

Block copolymers with hydroxyl segments were prepared by various ways An example utilizes the copper-catalyzed sequential copolymerizations of nBA and 2-[(trimethylsilyl)oxy]ethyl acrylate by the macroinitiator method into B-31 to B-33. The copolymers were then hydrolyzed into amphiphilic forms by deprotection of the silyl groups.313 A direct chain-extension reaction of polystyrene and PMMA with HEMA also afforded similar block copolymers with hydroxyl segments (B-34 and B-35).241-243 In block polymer B-36, a hydroxy-functionalized acrylamide provides a hydrophilic segment.117 Block copolymers of styrene and p-acetoxystyrene (B-37 to B-39), prepared by iron... 

Rasmussen found that copolymers comprising cross-Unked networks of meth-acrylic acid and 2-hydroxy methacrylate, cross-linked with cross-linking agents such as ethylene glycol dimethacrylate and 1,1,1-trimethylolpropane trimethacrylate had tensile strengths well above the tensile strengths of polyacrylamide type materials (Table 4.1) [6]. 

Chart 9.6 Chemical structures of random copolymers used for 157 nm lithography (a) poly[4-(2-hydroxy hexafluoro isopropyl) styrene-co-t-butyl acrylate] and (b) poly[4-(2-hydroxy hexafluoro isopropyl) styrene-co-t-butyl methacrylate] [35]. 

---