Acid Potash

No compound of potassium with silicon is accurately known but with silicic acid potash forma compounds, which are known as glass. When the silica predominates, we have ordinary hard insoluble glass when the potash is in excess, the compound is called silicate of potash. It is a glassy mass, soluble in water, and the solution has long been known as liquor of flints. (See, hereafter, under the head of Salts, the silicates, including glass and porcelain). 

Incompatibles.—Sulphuric and nitric acids potash, soda, lime, and their carbonates and most metallic salts. 

Tankage comes from two sources the dried solid product of boiling the bones, skin, meat scraps, and other animal by-products from abattoirs and garbage treated with high-pressure steam and subsequently pressed. Both products are high in nitrogen, in the form of ammonia, and phosphorus as phosphoric acid, potash, and phosphates. Tankage can be flammable and presents a spontaneous combustion hazard. 

Fontana also published on formic acid and vegetable acids, potash and soda, the analysis of malachite, inflammable air, and bile. His measurements on the densities of gases were important but his most outstanding work was a series of experiments on respiration, the calcination of metals, adsorption of gases by charcoal (see p. 296), the production of inflammable gas from water and heated charcoal, etc., in which, e.g., he showed that the weight remains constant in chemical reactions, and that different gases follow Boyle s law. ... 

According to Riffault et al. (1874), English sky blue was indigo (. v.) reduced with sulfuric acid, potash and hme. 

C7H6O2 Oily liquid of aromatic odour b.p. 196°C. (t is prepared by the action of chloroform and caustic potash on phenol (the Reimer-Tiemann reaction) or by the oxidation of the glucoside salicin. It is easily reduced to salicyl alcohol or oxidized to salicylic acid. 

To obtain the free acid, the ester is hydrolysed by ethanolic potash to the dipotassium salt, which is converted into the insoluble silver salt. A hot aqueous... 

Collidine 2i5 d carboxylic acid. Boil a mixture of 5 g. of the ester (II) and 50 ml. of 15% ethanolic potash under reflux for 30 minutes. The dipotassium salt crystallises during the boiling and during the subsequent cooling. Filter off the potassium salt at the pump and wash it with a small quantity of ethanol. Dilute the filtrate with about an equal volume of ether to precipitate a further small crop of the salt. Yield of combined crops 4 5 g. from 5 g. of the estei (I). 

If only the monocarboxybc acid is required, the ester after hydrolysis with potash may be strongly acidified with sulphuric acid and the mixture heated under reflux the mineral acid promotes decarboxylation at a temperature just above 100°. The net result is the replacement of the halogen atom of the alkyl halide by —CH COOH thus in the above example ... 

Nitrophosphates are made by acidulating phosphate rock with nitric acid followed by ammoniation, addition of potash as desired, and granulation or prilling of the slurry. The acidulate, prior to ammoniation, contains calcium nitrate and phosphoric acid or monocalcium phosphate according to the foUowiag equations ... 

The U.S. domestic commercial potassium nitrate of the 1990s contains 13.9% N, 44.1% I+O, 0—1.8% Cl, 0.1% acid insoluble, and 0.08% moisture. The material is manufactured by Vicksburg Chemical Co. using a process developed by Southwest Potash Division of AMAX Corp. This process uses highly concentrated nitric acid to catalyze the oxidation of by-product nitrosyl chloride and hydrogen chloride to the mote valuable chlorine (68). The much simplified overall reaction is... 

Fig. 18. TVA-type cogranulation process with preneutralizer, as used for production of granular mixed fertilizers. Feed materials such as ammonium sulfate, ammonium nitrate, urea, superphosphates, sulfuric acid, and potash are used.

Acids such as sulfuric, hydrochloric, nitric, and especially hydrofluoric as well as strong alkaUes such as caustic soda and caustic potash are extremely corrosive to animal and vegetable tissue. Extreme caution must be taken to prevent skin contact, inhalation, or ingestion. Violent reactions may occur when dissolving or diluting many of these chemicals with water. 

Potassium Aluminum Sulfate. Potassium aluminum sulfate [7784-24-9]. KAl(SO 12H20, is a white, astringent crystal known as potassium alum, ordinary alum, or potash alum. Its formula weight is 474.39 mp 92.5 °C sp gr 1.75 and solubiUty 11.4 g per 100 mL H2O at 20°C (8). It is soluble in dilute acid and insoluble in alcohol. It dehydrates at about 200 °C to porous desiccated potassium alum [10043-67-1], KAl(SO dried or burnt alum, which has a formula weight of 258.20. 

The dye has been degraded by a fusion with caustic potash and the degradation products identified as various o-anilinyl mercaptans. They were identified and characterized by condensation with monochloroacetic acid to give the thioglycohc acids which, on acidification, were converted to well-defined crystalline lactams (2—4) together with a small amount of ji)-aminobenzoic acid. 

Potassium benzoate [582-25-2] is produced by neutralizing benzoic acid with caustic potash. The resulting solution is processed in a fashion nearly identical to that of sodium benzoate. Product forms are also similar. 

When heated with pyrocatechol [720-80-9] copper powder, and alcohoHc sodium hydroxide, carbon tetrachloride gives a blue color that changes to red on addition of hydrochloric acid. This color reaction is not produced by chloroform. Quantitative analysis of carbon tetrachloride may be done by first decomposing the sample free of organic and inorganic chlorides, heating in a sealed tube with alcohoHc potash, and subsequently determining the potassium chloride formed as the silver haHde. The Zeiss interference refractometer has been used to determine the concentration of carbon tetrachloride vapor in air (36). 

Inorga.nicNIa.teria.ls. These include acids (sulfuric, nitric, hydrochloric, and phosphoric), bases (caustic soda, caustic potash, soda ash, sodium carbonate, ammonia, and lime), salts (sodium chloride, sodium nitrite, and sodium sulfide) and other substances such as chlorine, bromine, phosphoms chlorides, and sulfur chlorides. The important point is that there is a significant usage of at least one inorganic material in all processes, and the overall toimage used by, and therefore the cost to, the dye industry is high. 

A base is any material that produces hydroxide ions when it is dissolved in water. The words alkaline, basic, and caustic are often used synonymously. Common bases include sodium hydroxide (lye), potassium hydroxide (potash lye), and calcium hydroxide (slaked lime). The concepts of strong versus weak bases, and concentrated versus dilute bases are exactly analogous to those for acids. Strong bases such as sodium hydroxide dissociate completely while weak bases such as the amines dissociate only partially. As with acids, bases can be either inorganic or organic. Typical reactions of bases include neutralization of acids, reaction with metals, and reaction with salts ... 

Evaporators have performed successfully in a number of industrial applications. Typical materials that are processed in evaporators include Caustic Soda, Caustic Potash, Sodium Carbonate, Sodium Dichromate, Sodium Nitrate, Ammonium Nitrate, Phosphoric Acid Superacid, Potash, Urea, Glue, Glycerine,... 

Constitution. Pelletierine behaves as a secondary amine and the oxygen atom of the alkaloid is present in the form of an aldehyde group, since the base yields an oxime, convertible by the action of phosphorus pentachloride into a nitrile, b.p. 104-6°/13 mm., which is hydrolysed by caustic potash in alcohol to an acid, the ethyl ester of which is Loffler and Kaim s ethyl -2-piperidylpropionate. Pelletierine is not directly oxidisable to this acid. It also yields a liquid hydrazone, b.p. 130°/20 ram., which with sodium in alcohol at 136-70° reduces to dZ-eoniine. These reactions are explained by the following formulas, in which pelletierine is represented as -2-piperidylpropionaldehyde. 

Convolamine, Ci,H2304N. This alkaloid is hydrolysed by boiling alcoholic potash into tropine and veratric acid, and is, therefore, veratroyl-tropine. It has m.p. 114-5° and yields a picrate, m.p. 263-4° (dec.) aurichloride, m.p. 201-2° platinichloride, m.p. 216-7°, and methiodide, m.p. 273-5°. 

---