Acetyl chloride acylation reactions

TV-Acylation of (73) can be achieved with acyl chlorides and pyridine or triethylamine, or with ketene (75S547 p. 560). 7V-Trimethylsilylazetidin-2-ones have been reported to undergo acyldesilylation on treatment with acetyl chloride. Acylation of (73) with imidates (78) at 150-160 °C was followed by ring expansion to give the pyrimidin-4-ones (79). Pyrimid-4-ones were obtained from a similar reaction of imidates with 4-alkoxyazetidin-2-ones (74CB270). Acylation with subsequent ring expansion also occurs with dithioimidates (73CPB1305). 

Under Friedel-Crafts reaction conditions, acetyl chloride acylates butadiene and 2,3-dimethylbutadiene in iron derivatives in the presence of AlCl, in CHCI3 or CCI4 solution [equation (8.59)]. 

TTie true ketones, in which the >CO group is in the side chain, the most common examples being acetophenone or methyl phenyl ketone, C HjCOCH, and benzophenone or diphenyl ketone, C HjCOC(Hj. These ketones are usually prepared by a modification of the Friedel-Crafts reaction, an aromatic hydrocarbon being treated with an acyl chloride (either aliphatic or aromatic) in the presence of aluminium chloride. Thus benzene reacts with acetyl chloride... 

Sulfonated styrene—divinylbensene cross-linked polymers have been appHed in many of the previously mentioned reactions and also in the acylation of thiophene with acetic anhydride and acetyl chloride (209). Resins of this type (Dowex 50, Amherljte IR-112, and Permutit Q) are particularly effective catalysts in the alkylation of phenols with olefins (such as propylene, isobutylene, diisobutylene), alkyl haUdes, and alcohols (210) (see Ion exchange). Superacids. 

The synthesis of 2,4-dihydroxyacetophenone [89-84-9] (21) by acylation reactions of resorcinol has been extensively studied. The reaction is performed using acetic anhydride (104), acetyl chloride (105), or acetic acid (106). The esterification of resorcinol by acetic anhydride followed by the isomerization of the diacetate intermediate has also been described in the presence of zinc chloride (107). Alkylation of resorcinol can be carried out using ethers (108), olefins (109), or alcohols (110). The catalysts which are generally used include sulfuric acid, phosphoric and polyphosphoric acids, acidic resins, or aluminum and iron derivatives. 2-Chlororesorcinol [6201-65-1] (22) is obtained by a sulfonation—chloration—desulfonation technique (111). 1,2,4-Trihydroxybenzene [533-73-3] (23) is obtained by hydroxylation of resorcinol using hydrogen peroxide (112) or peracids (113). 

Acylation. Aliphatic amine oxides react with acylating agents such as acetic anhydride and acetyl chloride to form either A[,A/-diaLkylamides and aldehyde (34), the Polonovski reaction, or an ester, depending upon the polarity of the solvent used (35,36). Along with a polar mechanism (37), a metal-complex-induced mechanism involving a free-radical intermediate has been proposed. 

Acylation. Reaction conditions employed to acylate an aminophenol (using acetic anhydride in alkaU or pyridine, acetyl chloride and pyridine in toluene, or ketene in ethanol) usually lead to involvement of the amino function. If an excess of reagent is used, however, especially with 2-aminophenol, 0,A/-diacylated products are formed. Aminophenol carboxylates (0-acylated aminophenols) normally are prepared by the reduction of the corresponding nitrophenyl carboxylates, which is of particular importance with the 4-aminophenol derivatives. A migration of the acyl group from the O to the N position is known to occur for some 2- and 4-aminophenol acylated products. Whereas ethyl 4-aminophenyl carbonate is relatively stable in dilute acid, the 2-derivative has been shown to rearrange slowly to give ethyl 2-hydroxyphenyl carbamate [35580-89-3] (26). 

Friedel-Crafts Acylation. The Friedel-Crafts acylation procedure is the most important method for preparing aromatic ketones and thein derivatives. Acetyl chloride (acetic anhydride) reacts with benzene ia the presence of aluminum chloride or acid catalysts to produce acetophenone [98-86-2], CgHgO (1-phenylethanone). Benzene can also be condensed with dicarboxyHc acid anhydrides to yield benzoyl derivatives of carboxyHc acids. These benzoyl derivatives are often used for constmcting polycycHc molecules (Haworth reaction). For example, benzene reacts with succinic anhydride ia the presence of aluminum chloride to produce P-benzoylpropionic acid [2051-95-8] which is converted iato a-tetralone [529-34-0] (30). 

Acylations were often carried out with diaziridines. Twofold acylation is normally observed when two NH groups are present. Most acylations were performed with benzoyl chloride, acetyl chloride or phenyl isocyanate (B-67MI50800). Ring opening reactions during acylation, foreseeable for intermediates of electrophilic attack on nitrogen, were observed only seldom, provided mild conditions were used. 

The strong para-directing influence of fluorine in Fnedel-Crafts acylation is illustrated by the reaction of fluorotoluenes with acetyl chloride Treatment of 2-fluorotoluene, 3-fluorotoluene, and 2-fluoro-3-methyltoluene with acetyl chloride and aluminum chloride gives, respectively, 91, 82, and 80% substitution para to fluorine [27]... 

Bis(tnfluoromethyl)-4,5-dihydrooxazin-6-ones [28] and their O-acetylated dcnvatives [96] are formed on treatment of acyl imines with acetyl chloride-hiethylamine at room temperature. The reaction was interpreted as a cycloaddition reaction involving a ketene [28] However, the periselectivity and regiochemistry of this reactwn-are not in agreement with results obtained from the reaction of... 

Partial rate factors may be used to estimate product distributions in disubstituted benzene derivatives. The reactivity of a particular position in o-bromotoluene, for example, is given by the product of the partial rate factors for the corresponding position in toluene and bromobenzene. On the basis of the partial rate factor data given here for Friedel-Crafts acylation, predict the major product of the reaction of o-bromotoluene with acetyl chloride and aluminum chloride. 

The reaction of the enamine (96) with acetyl chloride was reported (72) to afford no acyl derivative but the aminocyclobutanone (97) and the hydrochloride of the enamine. 

Acylation of 3-arylamino-4-arylimino-4//-pyrido[l,2-u]pyrazines (373) with acyl chlorides afforded mixtures of mono- and bisacylated derivatives 374 and 375 (99JPR332). Acetyl chloride gave only monoacylated product 374 (R = 4-MePh, R =Me). Bis-acylated derivative 375 (R = 4-MePh, r = Me) was obtained in 68% yield in boiling toluene. Reaction of 373 with dienophiles 376 and 377 gave 4-thiono and 4-seleno derivatives of 4//-pyrido[l,2-u]pyrazines 378 (Y==S, Se) and 4-imino-4//-pyrido[l,2-u]pyrazines 379, respectively (99JPR332). 

As an illustrating example for the application of the Friedel-Crafts acylation in the synthesis of complex molecules, its use in the synthesis of [2.2.2]cyclophane 13 by Cram and Truesdale shall be outlined. The reaction of [2.2]paracyclo-phane 10 with acetyl chloride gives the acetyl-[2.2]paracyclophane 11, which is converted into the pseudo-geminal disubstituted phane 12 by a Blanc reaction, and further to the triple bridge hydrocarbon 13 ... 

Self-condensation of the substituted propiophenone, 15, by the pinacol reaction proceeds to give the glycol, 16, as the meso isomer. (If it is assumed that the transition state for this reaction resembles product, this stereoselectivity can be rationalized on the grounds of steric interaction compare A, which leads to the observed product, with B.) Dehydration under very specialized conditions (acetyl chloride, acetic anhydride) affords the bisstyrene-type diene (17). Removal of the acyl groups by means of base affords the synthetic estrogen, dien-... 

Aminosodium salt and acylated with 1 H-tetrazole-1 -acetyl chloride. The acetoxy group is then displaced by reaction with 5-methyl-1,3-4-thi-adiazole-2-thiol in buffer solution. The product acid is converted to the sodium salt by NaHCOa. 

In an attempt to study the behavior and chemistry of coal in ionic liquids, 1,2-diphenylethane was chosen as a model compound and its reaction in acidic pyri-dinium chloroaluminate(III) melts ([PyHjCl/AlCb was investigated [69]. At 40 °C, 1,2-diphenylethane undergoes a series of alkylation and dealkylation reactions to give a mixture of products. Some of the products are shown in Scheme 5.1-40. Newman also investigated the reactions of 1,2-diphenylethane with acylating agents such as acetyl chloride or acetic anhydride in the pyridinium ionic liquid [70] and with alcohols such as isopropanol [71]. 

For the acylation of naphthalene, the ionic liquid gives the highest reported selectivity for the 1-position [95]. The acetylation of anthracene at 0 °C was found to be a reversible reaction. The initial product of the reaction between acetyl chloride (1.1 equivalents) and anthracene is 9-acetylanthracene, formed in 70 % yield in less than 5 minutes. The 9-acetylanthracene was then found to undergo diacetylation reactions, giving the 1,5- and 1,8-diacetylanthracenes and anthracene after 24 hours (Scheme 5.1-64). 

The Friedel-Crafts acylation reaction has also been performed in iron(III) chloride ionic liquids, by Seddon and co-workers [96]. An example is the acetylation of benzene (Scheme 5.1-66). Ionic liquids of the type [EMIM]Cl/FeCl3 (0.50 < X(FeCl3) < 0.62) are good acylation catalysts, with the added benefit that the ketone product of the reaction can be separated from the ionic liquid by solvent extraction, provided that X(FeCl3) is in the range 0.51-0.55. 

The ability of iron(III) chloride genuinely to catalyze Friedel-Crafts acylation reactions has also been recognized by Holderich and co-workers [97]. By immobilizing the ionic liquid [BMIM]Cl/FeCl3 on a solid support, Holderich was able to acetylate mesitylene, anisole, and m-xylene with acetyl chloride in excellent yield. The performance of the iron-based ionic liquid was then compared with that of the corresponding chlorostannate(II) and chloroaluminate(III) ionic liquids. The results are given in Scheme 5.1-67 and Table 5.1-5. As can be seen, the iron catalyst gave superior results to the aluminium- or tin-based catalysts. The reactions were also carried out in the gas phase at between 200 and 300 °C. The acetylation reac-... 

Just as an aromatic ring is alkylated by reaction with an alkyl chloride, it is acylated by reaction with a carboxylic acid chloride, RCOC1, in the presence of AICI3. That is, an acyl group (-COR pronounced a-sil) is substituted onto the aromatic ring. For example, reaction of benzene with acetyl chloride yields the ketone, acetophenone. 

---