Zinc alloy reduction

Trichloroethanol may be used analogously. The 2,2,2-trichloroethyl (Tee) group is best removed by reduction with copper-zinc alloy in DMF at 30 °C (F. Eckstein, nucleic acid synthesis see section 4.1.1. 

Several other useful modifications of calciothermic reduction have been successfully developed for the preparation of this neodymium-bearing magnetic alloy. One of these is reduction-extraction which involves the reduction of neodymium sesquioxide (Nd203) with calcium in a molten calcium chloride-sodium chloride salt bath at 750 °C and the simultaneous extraction of the reduced metal into a molten neodymium-zinc or neodymium-iron alloy pool. The neodymium-zinc alloy product is treated in vacuum to remove zinc and produce neodymium metal, while the neodymium-iron alloy is itself the end product of... 

The preparation of the metal was first reported by von Grosse (80) who obtained it by bombarding protactinium pentoxide with 35 keV electrons in a high vacuum and by decomposing the pentachloride on a hot wire. No properties were reported for these products and more recently the pure metal has been obtained by reduction of protactinium tetrafluoride with lithium (73) or barium (65,125) vapor at 1300°-1400°C using the double crucible technique and on a larger scale by reduction with barium (106) or 10% magnesium in zinc alloy (107). 

Watanabe and coworkers have found that alloy electrodes are often more efficient than electrodes made of pure metals. They have studies the reduction of CO on copper alloys with nickel, tin, lead, zinc cadmium and mercury [24]. The alloys were all produced by electroplating from mixtures of the metal ions in solution. In the cases of nickel, tin, lead and zinc alloys, current densities and faradaic efficiencies were all found to be greater than those of the pure components. Also product selectivity was found to be a function of the metal alloyed with copper. 

For the purpose of our investigation a test indicating ammonia and total oxidized forms of inorganic nitrogen is highly useful. To satisfy this need we developed a fully automated method comprised of two steps first, an eflBcient reduction of nitrite and nitrate by copper-zinc alloy to... 

It is also possible to reductively dehalogenate more reactive alkyl halides with either zinc (Zn) dust or a copper-zinc alloy (Cu-Zn) in the presence of an alcohol and protic acid, but this method also suffers from lack of specificity and is also frequently attended by skeletal rearrangement. 

Alloying metals with impurities results in a reduction in the thermal conductivity, for the same reason that the electrical conductivity is decreased (Section 18.8) namely, the impurity atoms, especially if in solid solution, act as scattering centers, lowering the efficiency of electron motion. A plot of thermal conductivity versus composition for copper-zinc alloys (Figure 19.4) displays this effect. 

Production. Indium is recovered from fumes, dusts, slags, residues, and alloys from zinc or lead—zinc smelting. The source material itself, a reduction bullion, flue dust, or electrolytic slime intermediate, is leached with sulfuric or hydrochloric acid, the solutions are concentrated, if necessary, and cmde indium is recovered as 99+% metal. This impure indium is then refined to 99.99%, 99.999%, 99.9999%, or higher grades by a variety of classical chemical and electrochemical processes. 

With special techniques for the activation of the metal—e.g. for removal of the oxide layer, and the preparation of finely dispersed metal—the scope of the Refor-matsky reaction has been broadened, and yields have been markedly improved." The attempted activation of zinc by treatment with iodine or dibromomethane, or washing with dilute hydrochloric acid prior to use, often is only moderately successful. Much more effective is the use of special alloys—e.g. zinc-copper couple, or the reduction of zinc halides using potassium (the so-called Rieke procedure ) or potassium graphite. The application of ultrasound has also been reported. ... 

The anode residues must be chemically processed to recover the plutonium remaining in the residues. This may amount to about 10% of the feed mass if delta alloy is the feed metal. Either aqueous or pyrochemical processes may be used for anode recovery. One pyrochemical process used for recovery utilizes oxidation of the plutonium with zinc chloride to form plutonium chloride salt, followed by calcium reduction of the PUCI3 contained in the salt phase to produce pure plutonium metal (the impurities follow the zinc metal obtained from the oxidation reaction and are discarded to waste). Impurities more stable than calcium chloride remain in the salt phase and are also... 

Cathodic electrodeposition of microcrystalline cadmium-zinc selenide (Cdi i Zn i Se CZS) films has been reported from selenite and selenosulfate baths [125, 126]. When applied for CZS, the typical electrocrystallization process from acidic solutions involves the underpotential reduction of at least one of the metal ion species (the less noble zinc). However, the direct formation of the alloy in this manner is problematic, basically due to a large difference between the redox potentials of and Cd " couples [127]. In solutions containing both zinc and cadmium ions, Cd will deposit preferentially because of its more positive potential, thus leading to free CdSe phase. This is true even if the cations are complexed since the stability constants of cadmium and zinc with various complexants are similar. Notwithstanding, films electrodeposited from typical solutions have been used to study the molar fraction dependence of the CZS band gap energy in the light of photoelectrochemical measurements, along with considerations within the virtual crystal approximation [128]. 

Despite the previous comments there are dangerous forms of this metal. Thus, the Ru-Zn alloy, when treated by hydrochloric acid leads to zinc dissolving into a very porous ruthenium, which detonates in air spontaneousiy. The same goes for ruthenium, which is obtained by reduction of its salts by sodium borohydride. It is recommended to reduce ruthenium salts using hydrazine, which is reputed to be not dangerous . However, with ruthenium trichioride this reaction seems to be not dangerous only when hydrazine has a very low molar ratio (0.9 mol per cent). If it is not the case, a huge volume of gas could constitute an important pressure risk. 

Dissolution of a zinc-ruthenium alloy in hydrochloric acid leaves an explosive residue of finely divided ruthenium [1], More probably this is the hydride, which may decompose on slight stimulus, the evolved hydrogen probably igniting because of the catalytic activity of the metal. Ruthenium prepared from its compounds by borohydride reduction is especially dangerous in this respect [2],... 

In this paper, the selectivity of the ECH method for the reduction of nitro compounds to the corresponding amines on RCu electrodes will be compared with that of reduction by RCu alloy powder in alkaline aqueous ethanol. In the latter method (termed chemical catalytic hydrogenation (CCH)), chemisorbed hydrogen is generated in situ but by reduction of water by aluminium (by leaching of the alloy) (equation [12]). The reductions by in situ leaching must be carried out in a basic medium in order to ensure the conversion of insoluble Al(OH)3 into soluble aluminate (equation [12]). The selectivity and efficiency of the electrochemical reduction of 5-nitro-indoles, -benzofurane, and -benzothiophene at RCu electrodes in neutral and alkaline aqueous ethanol will also be compared with that of the classical reduction with zinc in acidic medium. 

The bimolecular reduction of aromatic nitro compounds, depending on reaction conditions, may produce azoxy compounds, azo compounds, hydrazo compounds (1,2-diarylhydrazines), benzidines, or amines. Whereas the reduction with zinc and sodium hydroxide leads to azo compounds, zinc and acetic acid/acetic anhydride produces azoxy compounds. Other reducing agents suggested are stannous chloride, magnesium with anhydrous methanol, a sodium-lead alloy in ethanol, thallium in ethanol, and sodium arsenite. 

Bicyclo[4.2.0]octanes wiLh carbonyl groups adjacent to each bridgehead carbon cleave the central bond on reduction with lithium in liquid ammonia,158,159 with sodium/potassium alloy in the presence of chlorotrimethylsilane,160 with zinc in acetic acid,37 or with zinc amalgam in hydrochloric acid.15 7... 

---