Yttrium-stabilized zirconium oxide

Yttrium Oxide (Y203)-Stabilized Zirconium Oxide (Zr02)... 

In a similar work, ultrasound radiation was used to prepare EU2O3 doped in zir-conia and yttrium-stabilized zirconium (YSZ) nanoparticles [83]. Europium oxide was also coated sonochemically on the surface of submicron spherical zirconia and YSZ, which were fabricated by wet chemical methods. Time decay measurements of the doped and coated materials were conducted using a pulsed laser source. Lifetimes < 1.1 ms radiative lifetime of the Eu+ ions were detected for the doped and coated as-prepared materials. When the doped and coated samples were an-... 

Ozin and coworkers recently extended the supra-molecular I S+ assembly into the synthesis of binary mesoporous yttrium oxide-stabilized-zirconium oxide materials.These materials were synthesized by a modified sol-gel method under basic conditions, where zirconium ethoxide and yttrium acetate were used as the precursors for the transition metal oxides, and CTAB was used to form the supramolecular templates. The use of ethylene glycol with coordinating capability as a cosolvent may play a role in controlling the hydrolysis rate and solubility of zirconium(IV) and yttrium(III). This synthesis strategy is similar to that of so-called polymerizable-complex method, which was widely used to prepare multicomponent single-phase oxides. The yttrium content in these binary materials can be tuned from 12-56 wt%, and no phase segregation of yttrium and zirconium oxides was observed. These materials could be applied in designing new solid oxide fuel-cell electrode materials. 

Cathode - Reaction site for reduction of protons (creation of H2) - Porous layer (to facilitate the evacuation of the gas produced) - Cermet - The material typically used is Ni-YSZ - YSZ = Yttrium-Stabilized Zirconium - In order to limit oxidation of the nickel, a mixture of water vapor and hydrogen is injected. The proportion of water vapor chosen varies, typically between 50 and 90%... 

Solid oxide fuel cells use zirconium oxide stabilized with yttrium as an electrolyte and have an OT of 850 to 1000°C. 

Complex FCC oxides of the fluorite type represent oxygen-conduction solid electrolytes (SOE s). They comprise a typical class of materials for the manufacture of sensors of oxygen activity in complex gas mixtures, oxygen pumps, electrolyzers and high-temperature fuel elements. These materials are based on doped oxides of cerium and thorium, zirconium and hafnium, and bismuth oxide. Materials based on zirconium oxide, for example, yttrium stabilized zirconia (YSZ) are the most known and studied among them. This fact is explained both by their processibility and a wide spectrum of practical applications and by the possibility to conduct studies on single crystals, which have the commercial name "fianites" and are used in jewelry. 

In the present feature there are research results of influence of stabilized additions of scandium, yttrium or lutecium oxides and their amount on its phase composition, temperature and time dependence of electrical conductivity of zirconium oxide samples that are fired at 1900° C. 

OJ.S.C. The Ukrainian research institute of refractories named after A.S. Berezhnoy developed a technology using the obtained results and organized production with turnout of high-density electroconductive ceramics on the basis of zirconium oxide that is stabilized with yttrium oxide and combined with addition of scandium and yttrium oxides. Properties of these compositions are given in the table. 

The sol-gel chemistry of Zr02 is similar to other tetravalent metal compounds such as Si02 and Ti02 Precursors such as zirconium halides and alkoxides are largely available, and they all hydrolyze rapidly in the presence of water. Zirconium oxide (and especially yttrium-stabilized Zr02 (YSZ)) is widely used as a thermal barrier but also as an ionic conductor (electroceramic). Even if it is not widely used for gas detection, its ionic conductivity makes it attractive as a sensor to control the oxygen level and thus the air/luel ratio in internal combustion engines. 

Powders of partially stabilized zirconium dioxide-yttrium oxide ceramics (PSZs) were prepared at room temperature and under nitrogen at atmospheric pressure by hydroiysis of zirconium and yttrium alcoholates solutions containing a carboxyiic acid. 

Another application is in tire oxidation of vapour mixtures in a chemical vapour transport reaction, the attempt being to coat materials with a tlrin layer of solid electrolyte. For example, a gas phase mixture consisting of the iodides of zirconium and yttrium is oxidized to form a thin layer of ytnia-stabilized zirconia on the surface of an electrode such as one of the lanthanum-snontium doped transition metal perovskites Lai j.Srj.M03 7, which can transmit oxygen as ions and electrons from an isolated volume of oxygen gas. 

Conceptually elegant, the SOFC nonetheless contains inherently expensive materials, such as an electrolyte made from zirconium dioxide stabilized with yttrium oxide, a strontium-doped lanthanum man-gaiiite cathode, and a nickel-doped stabilized zirconia anode. Moreover, no low-cost fabrication methods have yet been devised. 

---