Wool and

Most of the trichloroethylene produced is used for metal degreasing. Other important uses are in the scouring of wool and as an extractive solvent, e.g. for olive and soya bean oils. Minor uses are as a heat transfer medium, anaesthetic, insecticide and fumigant, paint remover and fire extinguisher. 

The reducing action of sulphurous acid and sulphites in solution leads to their use as mild bleaching agents (for example magenta and some natural dyes, such as indigo, and the yellow dye in wool and straw are bleached). They are also used as a preservative for fruit and other foodstuffs for this reason. Other uses are to remove chlorine from fabrics after bleaching and in photography. 

Place 65 g. of clean dry zinc wool and a few crystals of iodine in a 2 5 htre three-necked flask, equipped with an efficient reflux condenser with drying tube, a mechanical stirrer, and a dropping funnel. Prepare a mixture... 

The production of polyester fibers leads that of all other types Annual United States production of poly ester fibers is 1 6 million tons versus 1 4 million tons for cotton and 1 0 million tons for nylon Wool and silk trail far behind at 0 04 and 0 01 million tons re spectively... 

The physical properties of these fibers are compared with those of natural fibers and other synthetic fibers in Table 1. Additional property data may be found in compilations of the properties of natural and synthetic fibers (1). Apart from the polyolefins, acryhcs and nylon fibers are the lightest weight fibers on the market. Modacryhcs are considerably more dense than acryhcs, with a density about the same as wool and polyester. 

From 1910 onward waste filament yam had been chopped into short lengths suitable for use on the machinery designed to process cotton and wool staples into spun yams. In the 1930s new plants were built specifically to supply the staple fiber markets. During World War II the production of staple matched that of filament, and by 1950, staple viscose was the most important product. The new spun-yam oudets spawned a series of viscose developments aimed at matching the characteristics of wool and cotton more closely. Viscose rayon was, after all, silk-like. Compared with wool it lacked bulk, residence, and abrasion resistance. Compared to cotton, it was weaker, tended to shrink and crease more easily, and had a rather lean, limp hand. 

Fibers (see Fibers, survey) used in textile production can have a wide variety of origins plants, ie, ceUulosic fibers (see Fibers, cellulose esters) animals, ie, protein fibers (see Wool) and, in the twentieth century, synthetic polymers. Depending on the part of the plant, the ceUulosic fibers can be classified as seed fibers, eg, cotton (qv), kapok bast fibers, eg, linen from flax, hemp, jute and leaf fibers, eg, agave. Protein fibers include wool and hair fibers from a large variety of mammals, eg, sheep, goats, camels, rabbits, etc, and the cocoon material of insect larvae (sUk). Real sUk is derived from the cocoon of the silkworm, Bombjx mori and for a long time was only produced in China, from which it was traded widely as a highly valuable material. 

As improvements over P-methylumbeUiferone (55—57), 4-methyl-7-amino-coumarin [26093-31-2] (12a) and 7-dimethylamino-4-methylcoumarin [87-014] (12b) (58—61) were proposed. These compounds are used for brightening wool and nylon either in soap powders or detergents, or as salts under acid dyeing conditions. They are obtained by the Pechmaim synthesis from appropriately substituted phenols and P-ketocarboxyflc acid esters or nitriles in the presence of Lewis acid catalysts (see Coumarin). 

The most common chemical bleaching procedures are hypochlorite bleach for cotton hydrogen peroxide bleach for wool and cotton sodium chlorite bleach for cotton, polyamide, polyester, and polyacrylonitrile and reductive bleaching with dithionite for wool and polyamide. 

Polymers. AH nitro alcohols are sources of formaldehyde for cross-linking in polymers of urea, melamine, phenols, resorcinol, etc (see Amino RESINS AND PLASTICS). Nitrodiols and 2-hydroxymethyl-2-nitro-l,3-propanediol can be used as polyols to form polyester or polyurethane products (see Polyesters Urethane polymers). 2-Methyl-2-nitro-l-propanol is used in tires to promote the adhesion of mbber to tire cord (qv). Nitro alcohols are used as hardening agents in photographic processes, and 2-hydroxymethyl-2-nitro-l,3-propanediol is a cross-linking agent for starch adhesives, polyamides, urea resins, or wool, and in tanning operations (17—25). Wrinkle-resistant fabric with reduced free formaldehyde content is obtained by treatment with... 

This mixture is known as Quinoline Yellow A [8003-22-3] (Cl 47000) and is most widely used with polyester fibers (109). Upon sulfonation, the water-soluble Quinoline Yellow S or Acid Yellow 3 [8004-92-0] (Cl 47005) is obtained. This dye is used with wool and its aluminum salt as a pigment. Foron Yellow SE-3GL (Cl Disperse Yellow 64) is the 3-hydroxy-4-bromo derivative. Several other quinoline dyes are commercially available and find apphcations as biological stains and analytical reagents (110). 

Blends of wool and cotton (80 20) are being used more and more. For durable-press properties, resins, catalysts, and polymeric additives in finishing systems must be adjusted (186). 

---